14EN
CONTROLS,CONNECTORSANDINDICATORS(cont.)
LCD Panel
12
3 4 5 6 7
1Indicator of initial settings having been changed
This indicator is displayed if the initial settings have been changed.
2Mode display
Displays the current mode.
3Remaining battery power indicator
This bar graph gives a rough indication of how much battery power is remaining.
4Flash indicator ............................ ☞ pg. 33 This indicator is displayed if the flash button has been pressed and a mode that generates a flash (auto, forced on, or red- eye prevention) has been set.
5Timer mode indicator ................. ☞ pg. 32 This indicator is displayed if the Self timer button has been pressed and the timer mode has been set to either “1 second” or “8 seconds”.
6Macro mode indicator ................ ☞ pg. 36 This indicator is displayed if the macro button has been pressed and the macro mode has been turned on.
7Remaining photos counter
This indicates how many photos can still be taken.
Power Dial and Mode Display
The mode display appears on the LCD panel and screen, when the Power dial is set to certain position. Refer to the chart below for each mode. Press the DSP button to display the image, when the Power dial is set to “A”, “M” or “V”. Hold the Lock button down while turning the Power dial.
Power dial position | LCD panel |
| Page |
|
|
|
|
SET | SET UP | Displays the SET UP menu | 16 |
|
|
|
|
B | STILL PB | Displays the playback image | 31 |
|
|
|
|
OFF | — | — | — |
|
|
|
|
A | CAM AUTO | Displays the image | 30 |
|
|
|
|
M | MANUAL | Displays the image | 34 |
|
|
|
|
V | VIDEO | Displays the image | 49 |