JVC GC X 1 manual 34 EN, Manual Focus

Page 34
•Hold the Lock button down while turning the Power dial.

34EN

Manual Focus

You can focus to the subject manually.

MANUALSHOOTING

23,4

1

SET

4

OFF M

V

1 Turn the Power dial to “M”.

2 Press the FOCUS button, and then press the w

ebutton within two seconds.

•Press the w e button repeatedly to cycle through the following modes:

AF-S (Auto Focus-Single):

When the Shutter button is half-pressed, focus is automaticaly set once.

MF (Manual Focus):

You can focus to the subject manually. Press the r t button to focus.

Press the r button to lengthen the focal distance.

Press the t button to reduce the focal distance.

2.4m/8ft:

Sets the focus to this distance.

:

Sets the focus to infinity.

AF-C (Auto Focus-Continuous):

While the Shutter button is half-pressed, the camera will continue to focus on the subject automatically.

3 Point the lens at the subject and half-press the Shutter button.

•To display the image on the LCD screen while shooting, press the DSP button.

4 Press the Shutter button all the way to take the picture.

NOTES:

Focus manually in the following circumstances:

When shooting a low-contrast subject, such as a flat wall or a blue sky.

When there is an obstacle such as a wire fence between a subject and the camera.

When shooting a subject that has a very fine pattern, or a perfectly regular pattern.

When shooting a subject under flickering illumination, including fluorescent light, or when dark.

Image 34
Contents GC-X1 Dear Customer It is recommended that youSome DO’S and DON’TS on the Safe USE of Equipment DC input connector Connect the Camera to a Power Outlet. pgPower cord Power outlet Power lamp Connect the power cord to a power outletOpen the Memory card cover Insert the Memory card. pgKnob Memory card cover Memory card 3.3V type Insert the Memory cardShoot a Picture. pg Quick StartPlay back a Picture. pg DR Pro-Still Wide Range Mode pg Major Features EN6M Pro-Still Pixel Shift Mode pg Before taking important photosContents Subsidiary Settings Memory card 3.3V type Hand strap10 EN Front View Top ViewFront View Top View 12 EN CONTROLS, Connectors and IndicatorsRear View Bottom View Hand strap/lens cover mount Shoot standby lamp greenPull the cover to open 14 EN 5 6On-screen Display During PlaybackMenu Screens Turn the Power dial to SET to display the SET UP screen16 EN To turn off the menu screen, press the DSP buttonPlayback Menu Screens No displays18 EN Charging the BatteryInstall the battery PicturesInstalling a Charged Battery Removing the Battery20 EN Connecting the Camera to a Power OutletGetting Started Attaching the Lens Cover Attaching the Hand strapPass one end of the hand strap through the mounting hole Removing the Memory Card 22 ENInserting the Memory Card Contact surfacePress the r t button to select Format Formatting a Memory CardEXE button Lock button Button Press the r t button to select YESNormal Shooting 24 ENViewfinder Macro ShootingGood Photography Posture Using a TripodMounting the Camera on a Tripod 26 EN Selecting the Shooting ModeBasic Operation Zoom Shooting Zoom lever28 EN Turn the Power dial to SETTurn the Power dial to a or M for shooting Selecting the Picture SizeSelecting the Picture Quality Press the r t button to select QualityFull Auto Shooting Lock button Shutter button Power dial30 EN Press the Shutter button all the way to take the pictureAuto Playback Playing Back Still PicturesNormal Playback Press the w e button again to stop Auto PlaybackSelf timer button Shutter button Self Timer32 EN Flash Shooting Setting, since the shutter speed is slowerPress the Flash button and select the flash mode Flash. The flash is forced to light34 EN Manual FocusIris Setting → ProgramManual Shooting Turn the Power dial to A, M or36 EN Macro ShootingExposure Control 2EV38 EN White Balance AdjustmentPress the DSP button to turn off the menu screen Manual White Balance Adjustment White paper should fill the screen40 EN Sensitivity SettingPress the r t button to select Sens Changing the Zoom Power While Shooting 42 EN Shooting Continuous PhotosChanging the AE/AF Area Turn the Power dial to M Restoring the Default SettingsSelect Manual with the Mode switch Collage Mode Background Subject6M Pro-Still Pixel Shift Mode 46 ENDR Pro-Still Wide Range Mode NR Pro-Still Noise Reduction Mode 48 ENVideo Shooting Press the Shutter button all the way to shoot the video50 EN Select Video PB with the Mode switchVideo Playback Display Mode during Playback Brightness Adjustment of LCD ScreenPlayback Turn the Power dial to A, M or V for shooting52 EN Protecting PicturesDeleting Pictures To delete a selected pictureAdding Special Effects Select Edit with the Mode switch54 EN Press the r t button to select EffectPress the w e button to select OFF, B/W, SEPIA, or Nega Inputting the Date 56 EN− up → right ← left ↓ down Inputting the Calendar DARDigital Still Camera Connecting the Camera to a TV58 EN DC cordPrint Power outlet Power lampDigital Still Camera Power cord DC cord Printer GV-SP260 EN Printing a PicturePrinting takes longer if the picture size is set to 2032 x Turn the Power dial to B Press the r t button to select one Printing by Dpof SettingSelect Dpof with the Mode switch Dpof file is saved on the Memory card Changing Settings in the SET UP Menu Press the r t button to select an item2032 x 1536 Qxga class SET UP MenuContents 1024 x 768 XGA 640 x 480 VGASetting the Date and Time Subsidiary Settings66 EN Software Section Software Section for Windows 68 ENOperating Environment Preparation Installing the USB DriverSelect USB Mode with the Mode switch Click the Next button Click the Finish button70 EN Installing the Video PlayerLoad the provided CD-ROM to the CD-ROM drive Sending Image File to Computer Sending a video by e-mailBasic Playback Volume72 EN Play buttonDouble clicking on the icon of a video file When the playback finishes, click the Exit buttonEasy Playback Playback starts automatically74 EN Uninstalling the SoftwareClick the Start button JVC Video Decoder Macintosh76 EN Software Section for MacintoshInstalling the JVC Video Decoder 78 EN With Macintosh EN Software Section for Macintosh Click the 4 buttonDouble click the System Folder icon Double click the Extensions folder iconCannot shoot photos Power does not come onPower turned off while Cannot see the picture onLCD screen is splotchy Number more thanCannot format a Memory card Messages Contents Trouble ShootingError Messages for the camera 84 ENError Messages for the printer Please Wait86 EN Recommended distance for flashAC Power Adapter/Charger AA-V37 0C to 40C when charging 10C to 35CAC Power Adapter Optional 88 ENBuilt-in Rechargeable Battery 90 EN IndexMemo GC-X1