EN43
Changing the AE/AF Area
Normally, in this camera this setting is “MULTI” in order to prevent the subject from being out of focus while the background is in focus. If the camera does not focus on the point that you want it to, change this setting to “SPOT”.
3,6 | 4,5 | 2 |
1
SET | 4 | OFF |
|
| |
|
| M |
|
| V |
CAMERA SETTING
W. BALANCE | AUTO |
SENS. | 80 |
TELEPHOTO | 1X |
M. DRIVE | OFF |
AE/AF | SPOT |
CLEAR | EXE |
|
|
1
2
3
4 Press the r t button to select “AE/AF”.
5 Press the w e button to select “SPOT”.
6 Press the DSP button to turn off the menu screen.
NOTE:
MULTI: A precise exposure setting is made by dividing the scene into several sections and then measuring the light in each section.
SPOT: The exposure is set by measuring the light in a small spot in the center of the scene. Use this mode when you want to shoot a subject with a large difference between dark and bright area, such as someone on a skihill, or someone standing in a spotlight in a darkened theater.
●If “SPOT” is selected for shooting, press the DSP button until “ ” appears on the LCD screen.