JVC GC X 1 manual 78 EN, Sending Image File to Computer

•“USB MODE” appears on the LCD panel.

•Hold the Lock button down while turning the Power dial.

78EN

SOFTWARESECTIONFORMacintosh®(cont.)

Sending Image File to Computer

For details on the basic operation of Mac OS, refer to the instruction manual provided with your Macintosh® or Mac OS.

Preparation

Start Macintosh®.

●Insert a Memory card in which there are files you want to send to a computer. (☞ pg. 22)

●It is recommended to protect the important files in advance. (☞ pg. 52)

2 1

V

SET

4 OFF

M

1 Turn the Power dial to “B”.

2 Select “USB MODE” with the MODE switch.

3 Connect the camera to the computer using the provided USB cable. (☞ pg. 75)

•The “untitled” icon appears on the desktop of the computer.

4 Double click on the “untitled” icon.

5 Double click on the “DCVI (video)” or “DCIM (still picture)” folder.

6 Copy the necessary files from the “DCVI (video)” or “DCIM (still picture)” folder to the desktop of the computer.

•To copy a file in easy way, hold down the “option” key while dragging the file to the destination.

NOTES:

●When a file is being accessed from a personal computer, the flash standby lamp (red) will flash. Never disconnect the USB cable while the flash standby lamp (red) is flashing.

●The personal computer is sometimes unable to recognize the device that is connected via a USB cable. Therefore, when the copy of files has been finished, disconnect the USB cable and then control the camera with the MODE switch, Power dial, etc.

Sending a video by e-mail

You can easily send the copied video file as an attachment through your normal e-mail system.

NOTE:

●To open the video file which is sent by e-mail, you need a JVC Video Decoder to expand the compressed file. You can also download the JVC Video Decoder at our website. (http://www.jvc-victor.co.jp/english/download/ index-e.html)