Front Panel Features Equalizer Section, Low Cut

FRONT PANEL FEATURES

EQUALIZER SECTION (1)

There are two 15-band 2/3-octave filter sets. The filters are constant “Q” devices located at ISO center frequencies. Effective equalization range is from 25 Hz to 16 kHz per channel. Maximum cut per frequency is 18 dB and the boost per frequency is 12 dB.

AUTOMATIC FEEDBACK LOCATING LEDS (2)

When feedback occurs, the LED of the frequency band that is feeding back will illuminate, indicating the slider to be adjusted. The LED will remain illuminated for a few seconds even after the feedback is gone. This is to allow you to see where the feedback is if the feedback goes away before any correction is made. If there is no feedback occurring, the LED of the frequency band with the most signal in it will illuminate. Just because the LED is illuminated does not mean that there is feedback occurring.

OPERATING THE FEEDBACK LOCATING SYSTEM

The feedback locating system is normally used in one of two ways.

1.To catch and reduce/eliminate feedback “on-the-fly” during a performance.

2.To determine frequency bands that are susceptible to feedback before the performance, and elimi- nate them in advance. This is done after the system is set up, by bringing up the microphone levels slowly to the point of feedback. As they start to feedback, note the LED activity on the Q™215FX.

Move the faders to decrease the “identified” bands. Now you have eliminated a high percentage of potential feedback problems before the performance even begins.

Note: It is not uncommon for feedback to occur over several frequency bands. Also, go easy when making fader adjustments since extreme movements will affect your performance and be counter productive. Some feedback or ringing, although audible, may not be louder than the other program material and may not light an LED.

GAIN (3)

Calibrated control for regulating overall gain of the equalizer section. Unity gain throughout the signal chain may be maintained by recovering lost signal at this point.

For example: Assume the equalization process has introduced a signal loss of -6 dB by negative (-) adjust- ment of the EQ section. The gain should then be adjusted to +6 to maintain unity gain through the equalizer.

LOW CUT (4)

Provides high pass filtering at 40 Hz in the “in” position. Low frequency roll-off is at 12 dB per octave.

LOW CUT LED (5)

With the Low Cut switch in the “in” position, this LED will illuminate indicating a low frequency roll-off at 12 dB per octave at 40 Hz

BYPASS LED (6)

This LED will illuminate when the Bypass switch is in the “in” position, indicating that the EQ and gain controls are bypassed.

BYPASS (7)

In bypass mode (switch in), the input signal is routed directly to the output and is unaffected by all front panel controls except the low cut filter.

LED LEVEL METER (8)

This multicolored LED ladder indicates output level.

POWER SWITCH (9)

Used to turn AC mains power on or off.

Q 215FX specifications

The Peavey Q 215FX is a versatile and robust audio mixer designed for professional sound applications. Built to accommodate both live sound and studio environments, the Q 215FX is packed with features that cater to musicians, sound engineers, and audio enthusiasts alike.

One of the standout characteristics of the Q 215FX is its 16-channel input configuration, enabling users to connect multiple audio sources simultaneously. Each channel is equipped with a three-band EQ, allowing for precise tonal adjustments. This is particularly beneficial in live settings where sound quality is crucial for performances. The channels also feature insert points, providing flexibility for connecting external effects or processors, ensuring that you can enhance your sound as needed.

Another significant feature of the Q 215FX is its 24 built-in effects, including reverb, delay, and modulation effects. These effects can be easily accessed and adjusted using the intuitive interface, making it simple for users to add depth and character to their mixes. The onboard effects engine is a valuable tool for live performances, as it allows for real-time manipulation of sound without requiring additional external equipment.

The mixer also incorporates Peavey’s exclusive multistate global EQ. This feature enables users to tailor the overall tonal balance of the mix, ensuring that it fits the acoustic environment. Additionally, the Q 215FX is equipped with dual 7-band graphic equalizers on the outputs, offering an extra layer of control over the final mix.

In terms of connectivity, the Q 215FX offers a variety of options, including balanced XLR outputs, TRS jacks, and RCA inputs. This versatility makes it easy to integrate the mixer into existing audio setups, whether for recording, broadcasting, or live performances. Furthermore, the compact and lightweight design of the Q 215FX makes it an ideal choice for mobile applications, allowing users to transport and set up the mixer effortlessly.

The Peavey Q 215FX is also built for durability, featuring a rugged chassis that can withstand the rigors of frequent use. With its combination of professional-grade features, intuitive interface, and robust construction, the Q 215FX is an outstanding choice for anyone seeking a reliable and high-performance audio mixer. This mixer effectively balances power, functionality, and portability, making it a popular choice among sound professionals.