JVC DZ-VCA3U manual Applications, Power connection, Cart information

Page 3

Applications

Micro HD camera system can be used for following application; Endoscope operation in OR.

(This system should only be operated by doctors or authorized persons.)

Above application, the system can supply HD and SD signals to HD/SD monitor for display and to HD/SD VTR for recording/playback.

Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servic- ing.

ATTENTION:

Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety, please read all the safety and operating instruc- tions before you operate this product and keep this booklet for future reference.

Dear Customer,

Thank you for purchasing the MICRO HD CAMERA. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new MICRO HD CAMERA.

Importer’s name & address

J.P.C.: JVC PROFESSIONAL PRODUCTS COMPANY 1700 Valley Road, Wayne NJ 07470

TEL: (973) 317-5000

FAX: (973) 317-5030

Precautions on installing medical electrical equipment (Safety and hazard prevention)

For the safe use of this equipment, always follow the guidelines described below.

Power connection:

1.To prevent damage to the product, make sure that it is grounded properly and pay attention to its power polariza- tion.

2.Operate your product only from the type of power source indicated on the product label. If you are not sure of the type of power supply to the hospital, consult your product dealer or the local power company. If your product is intended to operate from battery power or other sources, refer to the operating instructions.

3.Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

4.Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

For the safe use of this equipment, be absolutely sure to follow the guidelines below.

1.Leave installation of the Mobile Video Cart and the unit to a specially trained service persons.

2.Be absolutely sure to use the separately sold AA-V31U isolation transformer.

3.There are openings in the equipment. Fire or electric shock may result if liquid splashes inside one of these openings. To prevent any possible problems, please set the cart in a reasonable position and use carefully.

Cart information

(1)Cart should meet with UL2601-1.

(2)Load capacity(Top)

Please chose a video cart which maximum load capacity is more than 45 kg.

(3)Two casters have brakes

When using a mobile cart in OR, two brakes should be set for safety after setting the position of the cart.

(4)Important notice 1

When using mobile video cart in OR, precautions to avoid crossing over the power cord of the cart.

When using a mobile cart in OR, precaution to avoid power cord of the cart to be caught by foot or caster of the cart should be taken.

(5)Important notice 2

When mounting monitor on a mobile cart, we strongly recommend the use of monitor strap for safety.

Monitor Strap

An example of using medical video cart.

• For medical use, please use the JVC Isolation Transformer, AA-V31U.

 

 

The specifications for the AA-V31U is given on page 22.

 

Do not use mobile cart when crossing a threshold or excessively thick carpet.

 

Be extra careful when transporting this product with mobile cart. Sudden stops, excessive force, and travelling on

3

 

uneven surfaces may cause the product and cart to topple.

Image 3
Contents DZ-VCA3U Standard construction Contents FeaturePower connection ApplicationsCart information Please Read Before Use Safety precautionsImportant product safety instructions Servicing Damage Requiring ServiceReplacement Parts Safety CheckPrecautions Safety precautionsHandling precautions Product disposal Inspection and maintenanceCamera Head Section Phenomena peculiar to CCDsConnections HeadVHS Camera control unit front panel Camera camera cable connector Menu control sectionMode control section Name of parts and their functionsNtsc Output Ntsc output section HD OUT video signal output sectionCamera cable connector plug Connect to camera control unit Camera control unit rear panelGain UP/GAIN Down button Gain switchAdjust volume Output level control sectionWhite Balance switch Setting button B buttonWhite balance control section Enhance button BAR buttonFreeze button Menu of this device has 3 screens Sync menu White Balance White balance adjustment AutoBasic operation ManualDT-V1900CGU Menu SettingCCU DZ-VCA3U SR-W7MAU W-VHSClass II Equipment ConnectorCamera head input/output connector DocumentsCamera control unit section SpecificationsCamera control unit Camera headEndoscope Adapter DZ-E3U Optional EquipmentsIsolation transformer AA-V31U HD monitor DT-V1900CGUWarranty and after-sales-service DZ-VCA3U