Names of parts and their functions (continued)
Output level control section
OUTPUT LEVEL
1
AUTO 
MANUAL
CAMERA
ADJUST
GAIN SHUTTER
2
3 4
1GAIN switch
[AUTO]
Adjusts gain automatically.
In this mode, the [GAIN UP]/[GAIN DOWN] button 3 and [SHUTTER UP]/[SHUTTER DOWN] button 4 operations are disabled.
[MANUAL]
Set to this position when adjust the [GAIN] and [SHUTTER] manually.
2ADJUST volume
Set the brightness during auto sensitivity adjustment. Enabled only when [GAIN] switch 1 is set to [AUTO].
3GAIN UP/GAIN DOWN button
[GAIN UP]
Each time this button is pressed, the gain increases by 1 dB.
[GAIN DOWN]
Each time this button is pressed, the gain decreases by 1 dB. Enabled only when [GAIN] switch 1 is set to [MANUAL]. Setting from
OUTPUT LEVEL | WHITE BALANCE | MENU SETTING |
AUTO | MANUAL | AUTO | MANUAL | ON | POWER |
OFF | |||||
|
| SETTING |
|
|
|
ONI
ADJUST |
| RED | BLUE |
|
GAIN | SHUTTER |
| ENHANCE FREEZE | BAR |
OFF | O |
4SHUTTER UP/SHUTTER DOWN button
Using the [SHUTTER UP] / [SHUTTER DOWN] button, the following setting is possible: 1/60, 1/100, 1/175, 1/250, 1/375, 1/500, 1/1000, 1/2000, 1/4000, 1/10000.
Enabled only when [GAIN] switch 1 is set to [MANUAL].
Flicker-free mode
Prevents flickering caused by fluorescent lighting in area with 50 Hz.
When the shutter speed is set at 1/100 sec
•When looking at the picture on the monitor while the electronic shutter is being used, the object movement appears to be discontinuous.
For example: in shutter speed of 1/2000 sec. Since the image for 1/2000 sec is taken out every 1/60 sec, this phenomenon occurs.
•When
12