Installation and connection
Mounting the Camera (continued)
When mounting the camera to the electrical box
NOTE:
Before mounting the camera to electrical boxes, please refer to local building codes for box type to use for
Connecting
1.Align j with the shooting direction when mounting the cover to the electrical box.
Outer case mounting screws
T |
|
FRON | Less than 4 mm |
UP |
Align with shooting direction
2.Follow steps 2 to 7 of AWhen mounting the camera directly to the ceiling or on the wallB
( Connecting) (A pg. 16).
Mount by allowing the cable to exit from the side
When mounting the camera to the ceiling or a wall, it is possible to guide the cable from the side without opening any holes.
The basic mounting method is identical to steps in AWhen mounting the camera directly to the ceiling or on the wallB (A pg. 16).
1.Break the cable extraction hole using a pair of
2.Pull out the cable from the extraction hole and mount it to the ceiling or wall
3.Connecting the cable
Follow steps 4 to 7 of AWhen mounting the camera directly to the ceiling or on the wallB ( Connecting) (A pg. 17)
Cable
Mounting
1.Attach the camera to the outer case that has been fastened to the electrical box.
Follow steps 1 to 3 of AWhen mounting the camera directly to the ceiling or on the wallB ( Mounting) (A pg. 17)
Adjusting Images
After mounting is completed, adjust the images while checking the actual image. (A pg. 19 AAdjusting ImagesB)
4.Adjusting Images
After mounting is completed, adjust the images while checking the actual image. (A pg. 19 AAdjusting ImagesB)
18