Adjusting Image
Adjusting Images
Upon mounting the camera, adjust the images while checking the actual image.
Mounting the test monitor
Connect the [MONITOR] terminal of this camera to a test monitor to adjust the camera’s shooting direction, image and focus.
*The power to the camera body must be ON when adjustments are performed.
[MONITOR] Terminal
Pan : ± 175
Rotation : ± 175
Tilt : ± 80
Test Monitor
WB ET
O
N
FOR S E RVIC E
4
FOCUS ADJUST
|
|
| UP |
| |
|
| OFF |
|
| |
1 | AGC |
| ON | ||
2 | CABLE | SHORT MID | LONG | ||
3 | LENGTH |
|
|
| |
4 | WHT. BAL. | ATW | AWB | ||
5 | BLC | OFF | ON |
6 | DAY/NIGHT | OFF | ON |
7 | SHUTTER | 1 /60 | 1 /100 |
8 | RESEVED | SET TO | OFF |
SEE INSTRUCTION MANUAL
Camera’s shooting direction mark
Pan center mark
Rotation center mark
Pan fastening screw
:Be sure to loosen the screw before adjusting.
Rotation knob
:Always adjust the rotation by holding this knob.
Adjusting the camera direction
The camera unit can be adjusted horizontally or vertically and rotated. Adjust the camera in the direction of the object.
CAUTION:
●Please discharge a static electricity by touching to a [MONITOR] Terminal by hand before adjust the angle of view.
●Before adjusting the shooting direction of the camera, ensure that the pan fastening screw is loosened. Moving the lens unit without loosening the pan fastening screw may damage the lens unit.
NOTE:
●Pan rotation of ±175 is possible from each of the camera’s shooting direction mark, pan center mark and rotation center mark. When adjusting the rotation, do not hold the lens unit. Always adjust by holding the rotation knob.
●When using the camera at locations with strong vibration, stabilize by tightening the tile fastening screw and pan fastening screw to prevent distortion of the camera’s field angle.
CAUTION:
●Moving the camera beyond its adjustable range may cause failure in maintaining the performance of this camera.
●As this camera has a wide tilt/rotation range, a part of this camera may appear on the screen depending on the field angle and orientation.
Do not hold the lens unit when adjusting the direction of the camera. Applying force on the lens unit may damage it
19