OSD SETTINGS
3. OSD Settings
Use the OSD menu to set up the camera for optimum performance.
LENS | AUTO |
| PRIVACY | OFF |
SHUTTER/AGC | AUTO |
| DAY/NIGHT | AUTO |
WHITE BAL | ATW |
| NR |
|
BACKLIGHT | OFF |
| CAMERA ID | OFF |
PICT ADJUST |
|
| SYNC | INT |
ATR | OFF |
| LANGUAGE | ENGLISH |
MOTION DET | OFF |
| CAMERA RESET |
|
NEXT |
|
| BACK |
|
EXIT | SAVE ALL |
| EXIT | SAVE ALL |
|
|
|
|
|
Figure 3-1 OSD Main Menu
3.1 Lens
The LENS settings allows you to configure Lens and brightness. Options are AUTO (Auto Iris lens) and MANUAL. The default setting is AUTO.
In the AUTO submenu, you can set the MODE as OPEN, CLOSE or AUTO. Then select SPEED to adjust the DC Iris Lens convergence speed.
TYPE | DC |
MODE | OPEN |
SPEED | 046 |
|
|
3.2 SHUTTER/AGC
You can set the SHUTTER/AGC as AUTO or MANUAL. The default setting is AUTO.
When LENS is set to AUTO: It is recommended to set SHUTTER/AGC to AUTO mode. In the AUTO submenu, adjust HIGH LUMINANCE MODE mode according to your application:
•AUTO IRIS mode: Use this for normal condition application environments. The IRIS level will be controlled by camera brightness.
•SHUT+AUTO IRIS mode: Use this for high light application environments. The exposure will be controlled by AES or the DC Iris. The iris level will be controlled by camera brightness.
HIGH LUMINANCE
MODEAUTO IRIS
BRIGHTNESS 024
LOW LUMINANCE
MODEAGC
BRIGHTNESS x0.25
10