OSD SETTINGS
Note: If you enable MOTION DET function, then PRIVACY function will support 4 zones only.
REA SEL | 1/8 |
TOP | 000 |
BOTTOM | 000 |
LEFT | 000 |
RIGHT | 000 |
COLOR | 1 |
TRANSP | 0.00 |
MOSAIC | OFF |
|
|
3.9 DAY/NIGHT
The camera will automatically switch to B/W mode when the illumination is under a certain threshold. There is no need to adjust this setting.
Under B/W mode, you can set BURST to be ON or OFF.
3.10 NR
NR allows you to configure the DNR (Digital Noise Reduction) settings to reduce noise on the screen. In the NR submenu, you can enable the NR MODE to the Y (BRIGHT) / C (COLOR), C LEVEL or Y LEVEL mode. According to your NR mode, you can adjust Y
LEVEL or C LEVEL as required.
NR MODE | Y/C |
Y LEVEL | 000 |
C LEVEL | 000 |
|
|
Note: When the Y/C Level is higher, the noise in dark areas become lessened. Also, resolution will become lower. When it is lower, there are more noise in dark areas.
3.11 CAMERA ID
CAMERA ID allow you to specify camera ID. Options are OFF (default) and ON. In the ON submenu, you can add a camera title up to 26 characters with 2 lines and also select where the title appears on the monitor screen.
3.12 LANGUAGE
OSD supports 8 multiple languages. Options include ENGLISH (default), JAPANESE, GERMAN, FRENCH, RUSSIAN, PORTUGUESE, SPANISH and SIMPLIFIED CHINESE.
3.13 CAMERA RESET
To restore factory defaults, select CAMERA RESET and then press the joystick control.
3.14 SAVE ALL
SAVE ALL item allows you to save all settings and exit the OSD menu.
13