8
G
ETTING
STARTED
Power
CHG. (charge) indicator
This camcorder’s
NOTES:
●No function is available without power supply.
●Use only specified power supply.
●Do not use provided power supply units with other equipment.
CHARGING THE BATTERY PACK
SUPPLY POWER
POWER indicator
END indicator
Marks
To AC outlet
1 Connect the charger’s AC power cord to a wall outlet. The power indicator lights.
ATTACH BATTERY PACK
2 Align the marks and slide the battery pack in the direction of the arrow until it locks in place. The CHG. indicator lights.
DETACH BATTERY PACK
3 When charging is completed, the END indicator lights. Slide the battery pack opposite the direction of the arrow.
REFRESH switch | REFRESH indicator |
Hook on.
Push in.
BATT. RELEASE
**REFRESH
The AC power adapter features a REFRESH function that allows you to fully discharge the battery pack before recharging.
To discharge the battery . . .
.... attach the battery pack to the adapter as
shown in the illustration to the left. Then push REFRESH. The REFRESH indicator lights when discharging starts, and goes out when discharging is complete.
BATT. PACK | CHARGE | DISCHARGE | |
approx. 1 hr. 10 min. | approx. | ||
3 hrs. 30 min. | |||
|
| ||
|
|
| |
approx. 1 hr. 10 min. | approx. | ||
3 hrs. 30 min. | |||
|
| ||
|
|
| |
approx. 2 hrs. 10 min. | approx. 7 hrs. | ||
|
|
| |
approx. 2 hrs. 40 min. | approx. 10 hrs. |
USING THE BATTERY PACK
ATTACH BATTERY PACK
1 Hook its top end to the camcorder and push the battery pack in until it locks in place.
DETACH BATTERY PACK
2 Slide BATT. RELEASE and pull out the battery pack.
RECORDING TIME
BATT. PACK |
|
| |
|
|
| |
approx. 1 hr. 5 min. | approx. 1 hr. | ||
(35 min.) | (35 min.) | ||
| |||
|
|
| |
approx. 1 hr. 5 min. | approx. 1 hr. | ||
(35 min.) | (35 min.) | ||
| |||
|
|
| |
approx. 2 hrs. 15 min. | approx. 2 hrs. 10 min. | ||
(1hr. 25 min.) | (1 hr. 20 min.) | ||
| |||
|
|
| |
approx. 3 hrs. | approx. 2 hrs. 50 min. | ||
(1hr. 50 min.) | (1 hr. 50 min.) | ||
| |||
|
|
|
( ): when the video light is on.