JVC GR-AX860 specifications Dissolve, Auto Select

27

BK BLACK FADER

Fades in/out to a black screen.

C BLUE FADER

Fades in/out to a blue screen.

MOSAIC FADER

Gradually turns/returns the picture into/from a mosaic pattern.

SHUTTER WIPE

A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the centre. *During Auto Select mode, the new image wipes in over the old image, not a black screen.

SLIDE WIPE

A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left. *During Auto Select mode, the new image wipes in over the old image, not a black screen.

CORNER WIPE

A black screen starts in the lower left corner and gradually fills the screen, or a new image starts in the upper right corner and fills the black screen.

*During Auto Select mode, the new image wipes in over the old image, not a black screen.

DISSOLVE

1 Press the RECORDING START/STOP button.

— Recording starts.

2 Press the RECORDING START/STOP button again.

—Recording stops, and the Record–Standby mode is engaged.

—Now the last scene is stored in memory.

Before the power turns off...

3 Press the RECORDING START/STOP button to resume recording.

—The stored scene is gradually replaced by the new scene being shot.

SCROLL WIPE (AUTO SELECT only)

A new image scrolls up onto the screen.

WINDOW WIPE (AUTO SELECT only)

A new image enters from the centre and moves towards all four corners of the screen.

DOOR WIPE (AUTO SELECT only)

A new image opens like a door onto the screen.

—— AUTO SELECT

Press RECORDING START/STOP to begin or end recording, and 6 wipe-ins are automatically generated, in the order shown below:

SLIDE WIPE

SCROLL WIPE

CORNER WIPE

WINDOW WIPE

DOOR WIPE

SHUTTER WIPE

1 Press the RECORDING START/STOP button.

— Recording starts.

2 Press the RECORDING START/STOP button again.

—Recording stops and the Record-Standby mode is engaged.

—Now the last scene is stored in memory.

Before the power turns off...

3 Press the RECORDING START/STOP button to resume recording.

—The new scene gradually wipes in over the stored scene.

—Repeat steps 2 and 3 as you like.

NOTES

(for Dissolve and Auto Select):

●Turning off the camcorder will erase the scene stored in memory. When a scene is erased from memory, the symbol indication blinks.

●The sound for the last recording’s scene is not stored in memory.

●This mode indicator blinks unless an image is stored in memory. In this case, shoot a scene first.