JVC GR-AX860 specifications Jlip ID no

MAIN MENU			29
		OFF	Disables the Shift Zoom function.
	♦50x		Magnifies wide-angle images to approximately 3.6 times the
Shift Zoom			original size, and enables zooming in the 18x – 50x range.
	♦140x		Magnifies wide-angle images to approximately 10 times the
			original size, and allows zooming from 50x to 140x.
Tele Macro		OFF	Usually set to this position.
	♦ON		Usually the distance to a subject where the lens is in focus
			depends on the zoom magnification. Unless there is a
			distance more than 1m to the subject, the lens is out of focus
			at the maximum telephoto setting. When set to “ON”, you
			can shoot a subject as large as possible at a distance of
			approx. 60 cm.
			•Depending on the zoom position, the lens may go out of
			focus.
Gain UP		AGC	Allows you to record a subject in a dark environment. It
			delivers a brighter, if slightly coarse, picture.
	♦ A		(Auto Slow Shutter) Combines AGC with electronic shutter
			speed (1/25 to 1/50) for shooting under much darker
			conditions. When shooting in poorly lit areas, or when
			shooting a dark subject in dim lighting, the unit will
			automatically enter the Auto Slow Shutter mode, reducing
			the shutter speed to 1/25 sec. Although the resulting picture
			will be similar to that obtained when using Strobe (☞ pg. 25),
			the image will be clear with less noise.
	♦OFF		Allows you to shoot dark scenes with no picture brightness
			adjustment.
Color Filter		NOR	For normal shooting with no colour adjustment.
	♦RED		Gives recording a reddish tint.
	♦BLUE		Gives recording a bluish tint.
Tape Length	Allows you to set the tape length depending on the tape used (☞ pg. 10).
Title	Allows you to superimpose a preset title onto a scene (☞ pg. 30).
Date/Time	Allows you to set the current date and time (☞ pg. 9).
SUB MENU		= Factory setting
Tally/EL*	ON		The tally lamp comes on to signal the start of recording, and
			the LCD window backlight comes on.
*EL=	OFF		The tally lamp remains off at all times, as does the LCD
*Electronic Luminance			window backlight.
Interval Timer and	These features allow you to set the parameters for Self-Timer (☞ pg. 32),
Rec. Time	Animation and Time-Lapse recording (☞ pg. 33).
JLIP ID NO.	This number will be necessary in the future when connecting the
	camcorder to a device such as a computer using the JLIP terminal.
	The numbers range from 01 to 99.

NOTES:

●When the video light’s LIGHT ON/AUTO/OFF switch is set to “ON” or “AUTO”, Auto Slow Shutter is disabled.

●When Auto Slow Shutter is activated, Auto Focus may not work properly.