JVC GR-AX657UM, GR-AX957UM manual Viewfinder Indications, Stop Recording, Press Display Button

Page 17

Tape remaining time indicator

25MIN MIN

(Now calculating)

120MIN

119MIN

3MIN

2MIN

(Blinking)

1MIN

(Blinking)

0MIN

(Blinking)

Recording Start/Stop Button

DISPLAY Button

EN17

4

 

STOP RECORDING

 

 

 

Press the Recording Start/Stop Button again to stop

 

 

 

recording.

 

 

 

 

 

 

 

 

•The camcorder re-enters the Record-Standby mode.

 

NOTES:

 

The cassette holder cannot be opened unless a power

 

supply is attached.

 

There may be a delay after you slide EJECT until the

 

holder opens. Do not use force.

 

The tape remaining time is displayed in the viewfinder

 

as shown.

 

The remaining time indicated in the viewfinder is

 

approximate.

 

The time required to calculate the remaining tape

 

length, and the accuracy of the calculation, may vary

 

according to the type of tape used.

 

The tape remaining time indicator is correct only if the

 

correct tape length has been selected (pg. 12).

 

RECORDING

“TAPE END” appears when the tape reaches its end, and

 

the power goes off automatically if left in this condition

 

for 5 minutes. “TAPE END” also appears when a cassette

 

whose tape is already at its end is loaded.

 

If the Record–Standby mode continues for 5 minutes

 

without performing Zoom or any other operations, the

 

camcorder’s power shuts off automatically. Set the

 

Power Switch to “POWER OFF”, and then back to

 

“CAMERA” to turn the camcorder on again.

 

If the Recording Start/Stop button is pressed after the

 

Record-Standby mode has continued for over

 

5 minutes, recording may not start immediately.

 

If you are recording on a cassette from the middle (such

 

as when a tape is removed and re-inserted during

 

recording), use the Retake function (pg. 19) to find

 

the end of the last recording so you don’t erase any of it.

 

The LENS COVER warning blinks for about 5 seconds

 

when the camcorder is turned on with the cover closed.

 

To turn the tally lamp off during recording, refer to pgs.

 

30 and 32.

 

Viewfinder Indications

 

Press DISPLAY to make the following indications appear/

 

disappear from the camcorder’s display: cassette warning,

 

tape remaining time, battery pack remaining power

 

indicator and tape length indicator (pg. 52).

 

 

 

 

 

 

1

 

PRESS DISPLAY BUTTON

 

 

To turn off the indications, press DISPLAY for more

 

 

 

than 1 second.

 

 

 

Press again for more than 1 second to make the

 

 

 

indications reappear.

 

NOTE:

 

Even if the indications are off, the tape remaining time

 

appears blinking when the tape is near its end, and the

 

battery pack remaining power indicator appears blinking

 

when the power is almost gone.

 

Image 17
Contents GR-AX957UM GR-AX857UM GR-AX657UM This unit is produced to comply with Standard IEC Publ Dear CustomerSlots and openings in the cabinet are provided for Point where they exit from the productIf the product has been dropped or damaged in any way To avoid personal injuryFor more details Quick Operation GuideCassettes marked can be used with this camcorder ZoomZoom out Cassette AdapterContents Supply Power PowerAttach Battery Pack Detach Battery PackDischarged EN9Switch OFF Power Clock Lithium Battery Insertion/RemovalRemove Battery Holder Insert Battery in HolderDate/Time Settings Tape Length Setting Recording Mode SettingSET Recording Mode ContOpen Cassette Holder Loading/Unloading a CassetteINSERT/REMOVE Cassette Close Cassette HolderViewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Adjust LengthTripod Mounting Attach StrapBasic Recording Power Switch PositionLoad a Cassette Start ShootingStop Recording Viewfinder IndicationsPress Display Button RecordingPush the Power Zoom Lever towards T EN Recording Basic FeaturesTo check the end of the last recording Feature Quick ReviewPress P. STABILIZER. appears Basic FeaturesFeature Picture Stabilizer To brighten the scene when natural lighting is too dim Feature Video Light GR-AX957/AX857 onlySnapshot GR-AX957only Recording Advanced FeaturesTake Snapshot If you press during Record-StandbyStart or END Recording Fade/WipeEngagemode FADE- or WIPE-STANDBY Select Mode Advanced FeaturesProgram AE With Special Effects Press P.AE to cycle through the modes as shown on the leftNega Posi mode Display ModeHigh shutter speed clearly captures fast-moving action Colors of a picture are reversedPress the Select Dial to display the Menu Screen Date/Time InsertInstant Titles Access Title MenuSelect the Desired Mode END Setting Using Menu For Detailed AdjustmentMake Setting Menu Screen Available Using The Menu Button Menu Screen Available Using The Select DialDemo Mode is set to on and the Menu Screen is closed Tally lamp comes on to signal the start of recordingAllows you to set the current date and time pg Recording pgAccess Manual Exposure Access Exposure MenuAdjust Exposure END Adjustment of ExposurePatterns that are regularly repeated FocusingAccess Manual Focus Access Focus MenuAdjust Focus END Adjustment of FocusAccess White Balance Adjustment White Balance AdjustmentSET Function Parameters To Return To Automatic White BalanceManual White Balance Operation Enter SettingSET Manual White Balance To Change The Tint For RecordingAccess INT. Time Menu Self-TimerStart Delayed Recording To Cancel Self-TimerTime-Lapse AnimationRewind or Fast-Forward the tape Playback Basic PlaybackPlay Back Stop PlaybackActivate Manual Tracking TrackingNoise bars disappear Finishes, the indication disappearsFeature Still Playback Playback FeaturesFeature Shuttle Search Feature Counter Memory FunctionCassette Adapter VHS Playpak Using The Cassette Adapter EN41Insert Battery Basic Connections And Tape Dubbing When connecting the cables, open this coverBasic Connections Connection For Tape DubbingTape Dubbing Remote control uses one lithium battery CR2025 Pull OUT Battery HolderFunctions ButtonsSelf-Timer Feature Self-Timer, Animation and Time-LapseAnimation Time-LapseInsert Editing Reset CounterFind EDIT-OUT Point Begin Insert EditingEND Audio Dubbing Audio DubbingBegin Audio Dubbing Clean Lens Cleaning The CamcorderAfter Use Remove EyepieceRecording does not start No power is suppliedAnimation or Time-Lapse is not AvailableAn error number i.e. E03 appears Review or Retake modeDuring recording, the indications do not appear Tape will not ejectClock Battery Warning White Balance Mode IndicatorTape Remaining Time Displayed and the tape remaining time warning52EN DC in Jack Connectors w to r are located beneath the cover Power Switch Battery Release SwitchTally Lamp Power Lamp GR-AX957 onlyQuick Review Pg , 9Digital Zoom DubbingTo avoid hazard To prevent damage and prolong service lifeAvoid using the unit For safety, do notDuring use Store cassettesGeneral ConnectorsProvided Accessories Optional Accessories Page Page GR-AX657UM

GR-AX657UM, GR-AX857UM, GR-AX957UM specifications

The JVC GR-AX957UM, GR-AX857UM, and GR-AX657UM are part of JVC’s highly regarded line of mini DV camcorders, designed for both amateur and semi-professional videographers looking to capture high-quality footage. Each model offers a unique blend of features and technologies that cater to varying user needs while sharing a common commitment to superior video performance.

One of the standout features of the JVC GR-AX957UM is its advanced image stabilization system. This technology significantly reduces camera shake, allowing users to achieve smooth, stable footage even while filming on the move. The GR-AX857UM follows closely with a reliable stabilization system, ensuring that both casual shoots and more serious filming engagements maintain clarity and focus. The GR-AX657UM, while slightly less sophisticated, still offers commendable stabilization that enhances video quality.

All three models come equipped with a powerful 700x digital zoom, enabling users to capture distant subjects with impressive detail. The optical zoom capabilities further enhance this feature, offering close-up shots without the loss of resolution. Additionally, the GR-AX957UM and GR-AX857UM support high-resolution formats, capturing video at resolutions ideal for both TV playback and editing purposes.

In terms of audio quality, each camcorder features a built-in microphone, but the GR-AX957UM takes it a step further with an external mic input. This allows for greater audio control, making it suitable for more professional uses where sound quality is critical. The GR-AX857UM also has solid audio capabilities, while the GR-AX657UM maintains decent built-in audio for everyday recording needs.

User experience is further enhanced through intuitive controls and a clear viewfinder. The LCD screen is designed for easy navigation, making it user-friendly for those new to video production while still offering enough functionality for experienced users. Each model supports multiple recording modes, allowing users to select the best settings for their specific shooting environment.

In conclusion, the JVC GR-AX957UM, GR-AX857UM, and GR-AX657UM are well-rounded camcorders that harness advanced technology to meet diverse filming requirements. From robust zoom capabilities to impressive image stabilization features, these models deliver quality performance, making them ideal choices for anyone ranging from budding filmmakers to seasoned videographers. Whether shooting personal moments or important events, these camcorders are built to deliver lasting memories in stunning detail.