JVC GR-D240 manual Using AC Power, About Batteries

	GETTING STARTED EN 13
Using AC Power	Operation Mode
Perform steps 4 – 5 in “Charging The Battery	To turn on the camcorder, set the Power Switch
Pack”.
	to any operation mode except “OFF” while
NOTE:
	pressing down the Lock Button located on the
The provided AC Adapter features automatic	switch.
voltage selection in the AC range from 110 V to	MENU/DATA	Power Switch
240 V.
		Lock Button
About Batteries
DANGER! Do not attempt to take the batteries
apart, or expose them to flame or excessive		M A
heat, as it may cause a fire or explosion.		POWER/
WARNING! Do not allow the battery or its
		CHARGE
terminals to come in contact with metals, as this		POWER/
can result in a short circuit and possibly start a		CHARGE lamp
fire.
To resume the original function of the	Choose the appropriate operation mode
accurate battery power indication
If the battery power indication differs from the	according to your preference using the Power
actual operating time, fully charge the battery,	Switch.
and then run it down. However this function may	Power Switch Position
not turn back if the battery was used for a long
period of time under extremely high/low	A (Full Auto Recording):
temperature condition or charged too many	Allows you to record using NO special effects
times.	or manual adjustments. Suitable for standard
	recording.
	The “A” indicator appears on the display.
	M (Manual Recording):
	Allows you to set various recording functions
	using the Menus. ( pg. 22)
	If you want more creative capabilities than Full
	Auto Recording, try this mode.
	OFF:
	Allows you to switch off the camcorder.
	PLAY:
	● Allows you to play back a recording on the
	tape.
	● Allows you to set various playback functions
	using the Menus. ( pg. 22)

GETTING STARTED

CONTINUED ON NEXT PAGE