JVC GR-D240 Cleaning The Camcorder, EN User Maintenance, To clean the exterior, To clean the lens

Page 42

42 EN USER MAINTENANCE

Cleaning The Camcorder

Before cleaning, turn off the camcorder and remove the battery pack and AC Adapter.

To clean the exterior

Wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.

To clean the LCD monitor

Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor.

To clean the lens

Blow it with a blower brush, then wipe gently with lens cleaning paper.

NOTES:

●Avoid using strong cleaning agents such as benzine or alcohol.

●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●Mould may form if the lens is left dirty.

●When using a cleaner or chemically treated cloth refer to the cautions of each product.

●To clean the viewfinder, please consult your nearest JVC dealer.

Image 42

Contents GR-D240 Dear CustomerProgram AE with Special Effects Data BatteryWipe/Fader Effects Backlight CompensationImportant for owners in the U.K Blue to N Neutral or Black Brown to L Live or RedSome DO’S and DON’TS on the Safe USE of Equipment References Index EN Getting StartedControls ConnectorsIndicators Other PartsLCD Monitor/Viewfinder Indications During Video Recording During Video Playback Before Using This Camcorder I T / M I X L10 0 Provided lens cap to Provided AccessoriesTo protect the lens, attach Camcorder as shownPower Charging The Battery PackSlide the strap guide fully towards the eyelet Data Battery System Maximum continuous recording timeUsing AC Power About BatteriesGrip Adjustment Language SettingsSet the Power Switch to a or M while Viewfinder AdjustmentBrightness Adjustment Of The Display Tripod MountingOr eject a cassette Getting StartedLoading/Unloading a Cassette To protect valuable recordingsBasic Recording Tape Remaining TimeApproximate recording time EN Video Recording While using the LCD monitorWhile using the viewfinder ZoomTime Code Video Recording ENJournalistic Shooting Quick ReviewVideo Playback To control the speaker volumeSpeaker VOL. + Lock Button Power Switch Blank SearchIf using a VCR, go to . If not, go to step Video Playback ENEN Menus for Detailed Adjustment Menus without Sub MenusMenus with Sub Menus Recording Menus Tele Macro Wide ModeDIS Wind CUTPriority CAM ResetDemo Mode BeepPlayback Menus OFF / on Menus for Detailed Adjustment ENWhen set to OFF, the camcorder’s display disappears pg , Time CodeSecond Recording EN Features for RecordingTo take a snapshot in the 5-second recording mode To deactivate Night-ScopeMotor Drive Mode Manual FocusSnapshot For Video Recording To return to automatic iris control Exposure ControlTo return to automatic exposure control To lock the exposure control and the irisBacklight Compensation To cancel Spot Exposure ControlPress Back Light once so that the indicator disappears Spot Exposure ControlWhite Balance Adjustment To change the settingTo return to automatic white balance Wipe Or Fader Effects To deactivate the selected effectVariable Shutter Speed 1/250 1/4000 Editing EN Switch To VCRDubbing To a VCR To S-VIDEO Yellow to Video Red to Audio R White to Audio LDubbing EN EditingTo DV OUT Connection To a Personal Computer Advanced features EN TroubleshootingPower Video PlaybackOther problems Troubleshooting ENCONDENSATION, Operation Paused Please Wait USE Cleaning CassetteCheck TAPE’S Erase Protection TAB TapeLens CAP Unit in Safeguard Mode Remove and Reattach BatteryUnit in Safeguard Mode Eject and Reinsert Tape HDVTo clean the exterior Cleaning The CamcorderEN User Maintenance To clean the LCD monitorBattery Packs CassettesEN Cautions LCD MonitorMain Unit About moisture condensation Serious malfunctioningAC Adapter EN SpecificationsCamcorder Ø3.5 mm, stereoRecording Capacity TermsGR-D240