JVC GR-D350AG Digital Dubbing, Equipped With a DV Connector, To use this camcorder as a recorder

Page 33

Set the camcorder’s Power Switch to “PLAY”. Set “REC MODE” to “SP” or “LP”. ( pg. 25)

				EDITING	EN 33
		Dubbing To Or From A Video Unit
				NOTES:

		Equipped With A DV Connector		● It is recommended to use the AC Adapter as
				the power supply instead of the battery pack.
		(Digital Dubbing)		● If a blank portion or disturbed image is played
				( pg. 13)
				back on the player during dubbing, the dubbing
	It is also possible to copy recorded scenes from
	the camcorder onto another video unit equipped			may stop so that an unusual image is not dubbed.
				● Even though the DV cable is connected correctly,
	with a DV connector. Since a digital signal is
				sometimes the image may not appear in step 4. If
	sent, there is little, if any, image or sound
				this occurs, turn off the power and make
	deterioration.
				connections again.

				● When using a DV cable, be sure to use the
				optional JVC VC-VDV204U DV cable.

Core ﬁlter

To DV IN/OUT

DV cable (optional)

To use this camcorder as a recorder

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.

3

4

5 Press the Recording Start/Stop Button to engage the Record-Pause mode.

●The “ DV IN ” indication appears on the screen.

6 Start playback on the player.

7 At the point you want to start dubbing, press the Recording Start/Stop Button to start dubbing. The indication rotates.

ADVANCED FEATURES

To DV IN/OUT

Video unit equipped with DV connector

To use this camcorder as a player

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.

3 Start playback on the camcorder. ( pg. 20)

4 At the point you want to start dubbing, start recording on the video unit. (Refer to the video unit’s instruction manual.)

5 To stop dubbing, stop recording on the video unit, then stop playback on this camcorder.

8 Press the Recording Start/Stop Button again to stop dubbing. The indication stops rotating.

9 Press 7 to return to the normal playback mode.

NOTE:

Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current “SOUND MODE” setting. ( pg. 23)

Image 33

Contents Dear Customer To deactivate the demonstration, set Demo Mode to OFF. pgUse SP Standard mode for important video recordings We recommend cleaning your video heads before useFor safety and reliability Do not leave the unitSafety Precautions Page Wipe/Fader Effects Data BatteryProgram AE and Special Effects Backlight CompensationBefore Using This Camcorder Make sure you only use cassettes with the Mini DV markIt is recommended that you use JVC brand cassette tapes Quick Review Recording From The Middle Of a Tape Tape Remaining Time LCD Monitor And ViewfinderEN Getting Started IndexÃIndicators ConnectorsControls ÅOther PartsGetting Started 10 ENDuring Video Recording During Video PlaybackHow To Attach The Lens Cap Provided AccessoriesHow To Attach The Shoulder Strap Slide the strap guide fully towards the eyeletCharging The Battery Pack PowerSlide the battery pack upward while pressing With other equipmentData Battery System Using The Battery PackPerform steps 2 3 in Charging The Battery Pack About BatteriesLanguage Settings Operation ModePower-Linked Operation Auto/Manual ModeViewﬁnder Adjustment Date/Time SettingsBrightness Adjustment Grip AdjustmentTo protect valuable recordings Tripod MountingVideo Recording EN Basic RecordingTape Remaining Time LCD Monitor And ViewﬁnderZooming EN Video RecordingZoom Zoom OutQuick Review Time CodeThen start recording.PLAYBACK Display Minutes Seconds Frames Frames = 1 secondEN Video Playback Normal PlaybackVideo Playback EN If using a VCR , go to stepMake sure all units are turned off Shown in the illustrationEN Menus for Detailed Adjustment Video Recording MenusVideo Playback Menus Recording Menus Pg , Brightness Adjustment Of The Display Pg , Date/Time SettingsOFF Time code is not displayed When set to OFF, the camcorder’s display disappears Sound Mode and NarrationPlayback Menus OFF / on26 EN Features for RecordingTape Night-ScopeManual Focus To reset to Auto FocusExposure Control Manual focus is recommended in situations listed belowIris Lock EN Features for RecordingTo return to automatic iris control Select Auto in stepTo change the setting White Balance AdjustmentSpot Exposure Control To lock the irisTo REC Select OFF in . The effect indicator disappearsSet WIPE/FADER to the desired mode. pg To deactivate the selected effectEffects Features for Recording ENProgram AE, Effects And Shutter SportsEN Editing Dubbing To a VCRDigital Dubbing Equipped With a DV ConnectorTo use this camcorder as a recorder To use this camcorder as a playerIf you are using a Windows XP, you can use To a PC with a DV connector by usingConferences over the Internet, using a It is also possible to transfer still/moving imagesPower TroubleshootingAdvanced features Video RecordingOther problems EN TroubleshootingAppears when the date/time is not set Button is pressed while the Power Switch is setBuilt-in clock battery has run out ReplacementEN User Maintenance Cleaning The CamcorderBattery Packs CassettesLCD Monitor Main Unit EN CautionsAC Adapter Camcorder42 EN Tape Speed REC ModeTerms Recording CapacityMemo GR-D350AG