JVC GR-DV4000, GR-DV5000 10 EN, Power, Charging The Battery Pack, Using The Battery Pack

Page 10

10 EN

Power

This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.

Charging The Battery Pack

When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.

If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced.

Please purchase a new one.

For other notes,  pg. 67.

Using The Battery Pack

Battery pack BN-V408U, BN-V416U or BN-V428U

POWER indicator

To AC outlet

AC Power

Adapter/

Charger

Power Switch

Lock Button

BATT.RELEASE Switch

Arrow

CHARGE indicator DC OUT connector

1Make sure you unplug the camcorder’s DC cord from the AC Power Adapter/Charger.

2Plug the AC Power Adapter/Charger’s power cord into an AC outlet. The POWER indicator lights.

3Attach the battery pack with the YZ mark aligned with the corresponding marks on the AC Power Adapter/Charger. The CHARGE indicator begins blinking to indicate charging has started.

4When the CHARGE indicator stops blinking but stays lit, charging is finished. Remove the battery pack.

5Unplug the AC Power Adapter/Charger’s power cord from the AC outlet.

Battery pack

Charging time

 

 

BN-V408U*

Approx. 1 hr. 30 min.

 

 

BN-V416U*

Approx. 2 hr.

 

 

BN-V428U

Approx. 3 hr. 20 min.

 

 

* Provided

 

NOTES:

If the protective cap is attached to the battery pack, remove it first.

If you connect the camcorder’s DC cord to the AC Power Adapter/Charger during battery charging, power is supplied to the camcorder and charging stops.

Charging is not possible if the wrong type of battery is used.

1With the arrow on the battery pack pointing upward, push the battery pack slightly against the battery pack mount a.

2Slide up the battery pack until it locks in place b.

To detach the battery pack...

Slide the battery pack down slightly while sliding BATT. RELEASE to detach it.

Maximum continuous recording time

Battery pack

LCD monitor on

Viewfinder on

 

 

 

BN-V408U*

1 hr. 5 min.

1 hr. 20 min.

 

 

 

BN-V416U*

2 hr. 15 min.

2 hr. 50 min.

 

 

 

BN-V428U

3 hr. 45 min.

5 hr.

 

 

 

BN-V840U

5 hr. 20 min.

7 hr.

 

 

 

BN-V856U

7 hr. 30 min.

10 hr.

 

 

 

* Provided

 

 

NOTES:

Recording time is reduced significantly under the following conditions:

Zoom or Record-Standby mode is engaged repeatedly.

The LCD monitor is used repeatedly.

The playback mode is engaged repeatedly.

Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.

Image 10
Contents GR-DV5000 GR-DV4000 Dear Customer It is recommended that you…Page For the Video Light provided with GR-DV5000 only High Temperature WarningBefore recording an important scene… USB Cable Lens Hood Lens Cap AAA R03 Battery x Memory Card 8 MBFor remote control unit BN-V408U-B Plug GR-DV4000 only DC Cord Editing CableHow To Attach The Core Filter for optional S-Video cable How To Attach/Detach The Lens HoodHow To Use The Audio Cable How To Attach The Lens Cap How To Attach The StrapReferences Automatic Demonstration Rotate the Menu Wheel to select OFF, and press itUsing The Battery Pack PowerCharging The Battery Pack 10 ENInformation Using AC PowerAbout Batteries Benefits Of Lithium-Ion Batteries12 EN Grip AdjustmentViewfinder Adjustment Tripod MountingOperation Mode Power-Linked OperationBuilt-in Clock’s Rechargeable Lithium Battery Press it. Parameter for Day is highlightedTo protect valuable recordings… Approximate recording time Tape Recording modeLoading a Cassette Unloading a Cassette  pg16 EN To protect valuable files available only for SD Memory Card…Basic Recording Tape indicatorRecording time Battery indicator Info LCD IndicationsZooming 18 ENTape Remaining Time Journalistic ShootingTime Code Time code cannot be resetWhen a blank portion is recorded on a tape Recording From The Middle Of a Tape20 EN Load a cassette.  pg Set the VIDEO/MEMORY Switch to VideoTo control the speaker volume… Normal PlaybackBlank Search Frame-By-Frame Playback Shuttle SearchSlow-Motion Playback Playback Zoom22 EN If using a VCR, go to stepWhite to Audio L Red to Audio R Yellow to Video To S-VIDEO Basic Shooting D.S.C. Snapshot Memory card indicatorNumber of shots Battery indicator To change the Image Size and/or Picture Quality,  pg24 EN Auto Playback Of ImagesPlayback Of Title Images Playback Of Video ClipsRotate the Menu Wheel Viewing File Information 26 ENIndex Playback Of Files For Index Playback of video clip files, performTo protect the currently displayed file Protecting FilesTo Remove Protection To protect all files stored in the memory cardTo delete the currently displayed file Memory card 28 ENDeleting Files To delete all files stored in the memory cardResetting The File Name Folder and File namesInitialising a Memory Card To Reset The Number Of Prints30 EN To Print By Selecting Still Images And Number Of PrintsMenus without Sub Menus Menus with Sub MenusWIPE/FADER 32 ENWipe Or Fader Effects To deactivate the selected effect…Program AE Press PROG.AE again. The effect indicator disappearsFactory-preset Shutter 1/50 SportsCamera Menu White Balance Adjustment34 EN BalanceManual Menu Manual36 EN System Menu SystemDisplay Menu 38 ENCamera Display Picture quality DSC MenuDSC Image sizeVideo Menu 40 ENVideo Video Display To deactivate Night-Scope… 42 ENNight Scope Night-Scope LED GR-DV5000 OnlyAfter shooting Colour tone changes depending onIf Auto C is selected Do not fire the flash at a person at short rangeTo end Self-Timer recording, select OFF in step Self-TimerSet SELF-TIMER to on .  pg 44 ENAuto Focus To reset to Auto FocusPress Focus or set the Power Switch to a Manual FocusExposure Control 46 ENIris Lock Backlight compensation brightens the subject quickly Set u to AUTO.  pg , 34 Or, set the Power Switch to aBacklight Compensation To return to automatic white balance…Before stops 48 ENNavigation Function Press the Recording Start/Stop Button to stop recordingCheck images before deleting Indicator appears brieflySet the VIDEO/MEMORY switch to Video Function properlyTo make video clips from real-time camera image 50 ENMail Clip Recording To make video clips from recorded video footageTitle Recording Title ImposeTitle Selection Card…52 EN Using The Info-ShoeTo Attach The Accessories To Use The Video LightTo use this camcorder as a recorder To use this camcorder as a player54 EN With a DV in Connector Digital DubbingDubbing To a Video Unit Equipped Connector Digital Dubbing Equipped With a DV OUT56 EN Dubbing Still Images Recorded On a Tape To a Memory CardInstalling The Batteries Buttons And FunctionsUsing the Remote Control Unit 58 ENTo hear the sound during Audio Dubbing Audio Dubbing pg AUX indication appears instead of MIC 60 EN Insert EditingSet Remote/VCR Code VCR Code List VCR Brand NameRandom Assemble Editing R.A.Edit You are now ready to try Random Assemble EditingMake Connections A JVC VCR equipped with a Remote Pause Connector…62 EN VCR other than above…Select Scenes For More Accurate Editing Adjustment Of VCR/Camcorder Timing64 EN Automatic Editing To VCRUsing USB cable Using USB cableUsing DV cable Using DV cableWebCam 66 ENThis camcorder can be used as a WebCam via USB connection Items 68 EN PowerSymptom Possible Causes Corrective Action Video and D.S.C. RecordingVIDEO/MEMORY Switch is Set the VIDEO/MEMORY VIDEO/MEMORY Set the VIDEO/MEMORY70 EN Advanced featuresPress Back Light Camcorder.  pg Set B-IN Flash to Auto C to display Other problemsFlash set to Auto or Manual Menu Place Is dischargedAngle of the LCD monitor Camcorder When the LCD monitor’s72 EN  pg , 31Consult your nearest JVC Clean the viewfinder, pleaseDealer 74 EN General Battery PrecautionsBattery Packs CassettesMain Unit Memory CardsLCD Monitor Do NOT…Video Light How To Handle a CD-ROM76 EN About moisture condensationSlide BATT.RELEASE 1 and remove the battery pack 2 Cleaning The CamcorderAfter Use 78 EN USB EditVTR 80 EN Controls ConnectorsIndicators Other Parts82 EN IndicationsLCD Monitor/Viewfinder Indications During D.S.C. Playback LCD Monitor/Viewfinder Indications During Video Playback84 EN FunctionAttempt memory card playback Being used as a recorderMemory card playback Attempt to use titles/frames86 EN Playback sound Wide Mode Wide ModeSound Mode Sound Mode Program AE With Special Effects Program AEGR-DV5000 GR-DV4000

GR-DV4000, GR-DV5000 specifications

The JVC GR-DV5000 and GR-DV4000 are compact digital camcorders that emerged in the early 2000s, representing a significant advancement in consumer video technology. Designed for both amateur and semi-professional videographers, these models are equipped with a variety of features and technologies that enhance their usability and video quality.

One of the main highlights of the GR-DV5000 is its 3CCD technology. Unlike traditional single-chip systems, the 3CCD setup uses three separate charge-coupled devices to capture light, which significantly improves color accuracy and depth. This technology allows for vibrant, true-to-life colors, making it an excellent choice for capturing critical moments in life such as weddings or family events. The GR-DV4000, while slightly lower in specification, also showcases commendable performance, providing a good balance of features and affordability.

Both camcorders feature a 10x optical zoom lens, allowing users to get close to their subjects without compromising image quality. This zoom capability is crucial for remote shots, ensuring versatility in various shooting environments, from expansive outdoor scenes to intimate indoor gatherings. The digital zoom feature extends this further, but for professional results, the optical zoom is always preferred.

The GR-DV5000 comes with enhanced manual controls that give videographers more creative freedom. Users can adjust the focus, exposure, and white balance settings manually, which is particularly beneficial when shooting in challenging lighting conditions. On the other hand, the GR-DV4000 focuses more on ease of use, making it perfect for casual users who want to point and shoot without delving deeply into technical settings.

In terms of connectivity and storage, both models utilize MiniDV tapes, which were popular for their capacity to store high-quality video. While this format may seem outdated, it provides reliable playback and archiving without the complications sometimes associated with digital storage.

The LCD screen on both camcorders facilitates easy framing and playback of footage, while the ergonomic design ensures comfort during extended use. The JVC GR-DV5000 also features a built-in stabilization system to help reduce shake during handheld shooting, further enhancing video quality.

In summary, the JVC GR-DV5000 and GR-DV4000 are remarkable camcorders that showcase the technological advancements of their time. Their standout features, such as 3CCD technology, optical zoom, and user-friendly controls, make them valuable tools for capturing memorable moments with clarity and precision. Whether for a professional project or casual use, these camcorders have cemented their place in the history of digital video recording.