JVC GR-DV5000 Time Code, Recording From The Middle Of a Tape, Time code cannot be reset

Page 19

EN 19

Time Code

During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback.

If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number.

To perform Random Assemble Editing ( pg. 61 – 64), time code is necessary. If during recording a blank portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform “Recording From The Middle Of A Tape” ( pg. 19) in the following cases;

When shooting again after playing back a recorded tape.

When power shuts off during shooting.

When a tape is removed and re-inserted during shooting.

When shooting using a partially recorded tape.

When shooting on a blank portion located partway through the tape.

When shooting again after shooting a scene then opening/closing the cassette holder cover.

 

 

Display

 

Frames are not displayed

 

 

 

 

 

 

during recording.

 

 

 

 

 

 

Minutes

 

 

 

 

 

 

 

 

 

 

 

Seconds

 

 

 

 

 

 

 

 

 

 

 

 

Frames

1

2 : 3

4 : 2

 

4

 

(25 frames = 1 second)

Recording From The Middle Of A Tape

1)Play back a tape or use Blank Search ( pg. 21) to find the spot at which you want to start recording, then engage the Still Playback mode. ( pg. 20)

2)Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch, then start recording.

NOTES:

The time code cannot be reset.

During fast-forwarding and rewinding, the time code indication does not move smoothly.

The time code is displayed only when “TIME CODE” is set to “ON”. ( pg. 38)

When a blank portion is recorded on a tape

Time code

Time code

Time code

00:00:00

05:43:21

00:00:00

 

 

 

 

 

 

Tape

Already

Blank

 

Newly recorded

recorded scene

 

scene

 

 

 

 

 

 

Shooting start

Shooting stop

Shooting start

 

point

 

point

point

Proper recording

Time code

Time code

Time code

00:00:00

05:43:21

05:44:00

 

 

 

 

Tape

Already

New

Latest scene

recorded scene

scene

 

 

 

 

 

 

 

Shooting start

Shooting start Shooting start

 

point

 

point point

VIDEO RECORDING & PLAYBACK

Image 19
Contents GR-DV5000 GR-DV4000 It is recommended that you… Dear CustomerPage For the Video Light provided with GR-DV5000 only High Temperature WarningBefore recording an important scene… BN-V408U-B Plug GR-DV4000 only DC Cord Editing Cable Lens Cap AAA R03 Battery x Memory Card 8 MBFor remote control unit USB Cable Lens HoodHow To Attach The Core Filter for optional S-Video cable How To Attach/Detach The Lens HoodHow To Use The Audio Cable How To Attach The Strap How To Attach The Lens CapReferences Rotate the Menu Wheel to select OFF, and press it Automatic Demonstration10 EN PowerCharging The Battery Pack Using The Battery PackBenefits Of Lithium-Ion Batteries Using AC PowerAbout Batteries InformationTripod Mounting Grip AdjustmentViewfinder Adjustment 12 ENPower-Linked Operation Operation ModePress it. Parameter for Day is highlighted Built-in Clock’s Rechargeable Lithium Battery pg Approximate recording time Tape Recording modeLoading a Cassette Unloading a Cassette To protect valuable recordings…To protect valuable files available only for SD Memory Card… 16 ENInfo LCD Indications Tape indicatorRecording time Battery indicator Basic RecordingJournalistic Shooting 18 ENTape Remaining Time ZoomingRecording From The Middle Of a Tape Time code cannot be resetWhen a blank portion is recorded on a tape Time CodeNormal Playback Load a cassette.  pg Set the VIDEO/MEMORY Switch to VideoTo control the speaker volume… 20 ENPlayback Zoom Shuttle SearchSlow-Motion Playback Blank Search Frame-By-Frame Playback22 EN If using a VCR, go to stepWhite to Audio L Red to Audio R Yellow to Video To S-VIDEO To change the Image Size and/or Picture Quality,  pg Memory card indicatorNumber of shots Battery indicator Basic Shooting D.S.C. SnapshotAuto Playback Of Images 24 ENPlayback Of Title Images Playback Of Video ClipsRotate the Menu Wheel For Index Playback of video clip files, perform 26 ENIndex Playback Of Files Viewing File InformationTo protect all files stored in the memory card Protecting FilesTo Remove Protection To protect the currently displayed fileTo delete all files stored in the memory card 28 ENDeleting Files To delete the currently displayed file Memory cardFolder and File names Resetting The File NameTo Print By Selecting Still Images And Number Of Prints To Reset The Number Of Prints30 EN Initialising a Memory CardMenus with Sub Menus Menus without Sub MenusTo deactivate the selected effect… 32 ENWipe Or Fader Effects WIPE/FADERSports Press PROG.AE again. The effect indicator disappearsFactory-preset Shutter 1/50 Program AEBalance White Balance Adjustment34 EN Camera MenuManual Manual Menu36 EN System System MenuDisplay Menu 38 ENCamera Display Image size DSC MenuDSC Picture qualityVideo Menu 40 ENVideo Video Display Night-Scope LED GR-DV5000 Only 42 ENNight Scope To deactivate Night-Scope…Do not fire the flash at a person at short range Colour tone changes depending onIf Auto C is selected After shooting44 EN Self-TimerSet SELF-TIMER to on .  pg To end Self-Timer recording, select OFF in stepManual Focus To reset to Auto FocusPress Focus or set the Power Switch to a Auto FocusExposure Control 46 ENIris Lock To return to automatic white balance… Set u to AUTO.  pg , 34 Or, set the Power Switch to aBacklight Compensation Backlight compensation brightens the subject quicklyPress the Recording Start/Stop Button to stop recording 48 ENNavigation Function Before stopsFunction properly Indicator appears brieflySet the VIDEO/MEMORY switch to Video Check images before deletingTo make video clips from recorded video footage 50 ENMail Clip Recording To make video clips from real-time camera imageCard… Title ImposeTitle Selection Title RecordingTo Use The Video Light Using The Info-ShoeTo Attach The Accessories 52 ENTo use this camcorder as a player To use this camcorder as a recorder54 EN With a DV in Connector Digital DubbingDubbing To a Video Unit Equipped Equipped With a DV OUT Connector Digital DubbingDubbing Still Images Recorded On a Tape To a Memory Card 56 ENButtons And Functions Installing The Batteries58 EN Using the Remote Control UnitTo hear the sound during Audio Dubbing Audio Dubbing pg AUX indication appears instead of MIC Insert Editing 60 ENYou are now ready to try Random Assemble Editing VCR Code List VCR Brand NameRandom Assemble Editing R.A.Edit Set Remote/VCR CodeVCR other than above… A JVC VCR equipped with a Remote Pause Connector…62 EN Make ConnectionsSelect Scenes Automatic Editing To VCR Adjustment Of VCR/Camcorder Timing64 EN For More Accurate EditingUsing DV cable Using USB cableUsing DV cable Using USB cableWebCam 66 ENThis camcorder can be used as a WebCam via USB connection Items Video and D.S.C. Recording PowerSymptom Possible Causes Corrective Action 68 ENVIDEO/MEMORY Set the VIDEO/MEMORY VIDEO/MEMORY Switch is Set the VIDEO/MEMORY70 EN Advanced featuresPress Back Light Is discharged Other problemsFlash set to Auto or Manual Menu Place Camcorder.  pg Set B-IN Flash to Auto C to display pg , 31 Camcorder When the LCD monitor’s72 EN Angle of the LCD monitorConsult your nearest JVC Clean the viewfinder, pleaseDealer Cassettes General Battery PrecautionsBattery Packs 74 ENDo NOT… Memory CardsLCD Monitor Main UnitAbout moisture condensation How To Handle a CD-ROM76 EN Video LightSlide BATT.RELEASE 1 and remove the battery pack 2 Cleaning The CamcorderAfter Use 78 EN USB EditVTR 80 EN Other Parts ConnectorsIndicators ControlsIndications 82 ENLCD Monitor/Viewfinder Indications During Video Playback LCD Monitor/Viewfinder Indications During D.S.C. PlaybackFunction 84 ENAttempt to use titles/frames Being used as a recorderMemory card playback Attempt memory card playback86 EN Program AE With Special Effects Program AE Wide Mode Wide ModeSound Mode Sound Mode Playback soundGR-DV5000 GR-DV4000

GR-DV4000, GR-DV5000 specifications

The JVC GR-DV5000 and GR-DV4000 are compact digital camcorders that emerged in the early 2000s, representing a significant advancement in consumer video technology. Designed for both amateur and semi-professional videographers, these models are equipped with a variety of features and technologies that enhance their usability and video quality.

One of the main highlights of the GR-DV5000 is its 3CCD technology. Unlike traditional single-chip systems, the 3CCD setup uses three separate charge-coupled devices to capture light, which significantly improves color accuracy and depth. This technology allows for vibrant, true-to-life colors, making it an excellent choice for capturing critical moments in life such as weddings or family events. The GR-DV4000, while slightly lower in specification, also showcases commendable performance, providing a good balance of features and affordability.

Both camcorders feature a 10x optical zoom lens, allowing users to get close to their subjects without compromising image quality. This zoom capability is crucial for remote shots, ensuring versatility in various shooting environments, from expansive outdoor scenes to intimate indoor gatherings. The digital zoom feature extends this further, but for professional results, the optical zoom is always preferred.

The GR-DV5000 comes with enhanced manual controls that give videographers more creative freedom. Users can adjust the focus, exposure, and white balance settings manually, which is particularly beneficial when shooting in challenging lighting conditions. On the other hand, the GR-DV4000 focuses more on ease of use, making it perfect for casual users who want to point and shoot without delving deeply into technical settings.

In terms of connectivity and storage, both models utilize MiniDV tapes, which were popular for their capacity to store high-quality video. While this format may seem outdated, it provides reliable playback and archiving without the complications sometimes associated with digital storage.

The LCD screen on both camcorders facilitates easy framing and playback of footage, while the ergonomic design ensures comfort during extended use. The JVC GR-DV5000 also features a built-in stabilization system to help reduce shake during handheld shooting, further enhancing video quality.

In summary, the JVC GR-DV5000 and GR-DV4000 are remarkable camcorders that showcase the technological advancements of their time. Their standout features, such as 3CCD technology, optical zoom, and user-friendly controls, make them valuable tools for capturing memorable moments with clarity and precision. Whether for a professional project or casual use, these camcorders have cemented their place in the history of digital video recording.