JVC GR-DV5000, GR-DV4000 instruction manual Basic Shooting D.S.C. Snapshot, Memory card indicator

Page 23
Lock Button
VIDEO/MEMORY Switch

D.S.C. RECORDING

EN 23

Basic Shooting (D.S.C. Snapshot)

You can use your camcorder as a Digital Still Camera for taking snapshots. Still images are stored in the memory card.

NOTE:

Before continuing, perform the procedures listed below:

●Power ( pg. 10)

●Loading A Memory Card ( pg. 16)

SNAPSHOT Button

Power Switch

PUSH OPEN Button

1Remove the lens cap.

2Press PUSH OPEN and open the LCD monitor fully, or pull out the viewfinder fully.

3Set the VIDEO/MEMORY Switch to “MEMORY”.

4Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.

5Press SNAPSHOT. The “O” indication appears while the snapshot is being taken.

●To check how the image looks before recording it in the memory card, press SNAPSHOT halfway and hold. The “ ” indicator appears and stops blinking when the captured image is focused. To cancel the recording, release SNAPSHOT. To record it in the memory card, press SNAPSHOT fully.

●Still images are recorded in the snapshot mode with no frame.

●To delete unwanted still images, refer to “Deleting Files” ( pg. 28).

●When you do not want to hear the shutter sound, set “BEEP” to “OFF”. ( pg. 31, 37)

●To change the Image Size and/or Picture

Quality,  pg. 31, 39.

.

Snapshot mode with no frame

There is the sound of a shutter closing.

AImage Size ( pg. 39, 82)

BFocus Icon ( pg. 82)

CShooting Icon ( pg. 82)

DCard Icon ( pg. 82)

EPicture Quality ( pg. 39, 82)

FRemaining Number Of Shots ( pg. 82)

INFO LCD Indications

1 2 3

aMemory card indicator

(Appears when a memory card is loaded and blinks when no memory card is loaded)

bNumber of shots

cBattery indicator

●To turn off the indications,  pg. 31, 38.

NOTES:

●Even if “DIS” is set to “ON” ( pg. 35), the Stabiliser will be disabled.

●If Program AE with special effects ( pg. 33) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●If shooting is not performed for approx. 5 minutes when the Power Switch is set to “A” or “M” and power is supplied from the battery pack, the camcorder shuts off automatically to save power. To perform shooting again, push back and pull out the viewfinder again or close and re-open the LCD monitor.

●The Motor Drive mode ( pg. 42) is disabled when the VIDEO/MEMORY Switch is set to “MEMORY”.

●When a cable is connected to the AV connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape.

●Still images taken are compliant to DCF (Design rule for Camera File system). They do not have any compatibility with devices which are not compliant to DCF.

RECORDING & PLAYBACK

DIGITAL STILL CAMERA (D.S.C.)

Page 22 Page 24
Image 23
Page 22 Page 24
Contents GR-DV5000 GR-DV4000 It is recommended that you… Dear CustomerPage Before recording an important scene… High Temperature WarningFor the Video Light provided with GR-DV5000 only BN-V408U-B Plug GR-DV4000 only DC Cord Editing Cable Lens Cap AAA R03 Battery x Memory Card 8 MBFor remote control unit USB Cable Lens HoodHow To Use The Audio Cable How To Attach/Detach The Lens HoodHow To Attach The Core Filter for optional S-Video cable How To Attach The Strap How To Attach The Lens CapReferences Rotate the Menu Wheel to select OFF, and press it Automatic Demonstration10 EN PowerCharging The Battery Pack Using The Battery PackBenefits Of Lithium-Ion Batteries Using AC PowerAbout Batteries InformationTripod Mounting Grip AdjustmentViewfinder Adjustment 12 ENPower-Linked Operation Operation ModePress it. Parameter for Day is highlighted Built-in Clock’s Rechargeable Lithium Battery pg Approximate recording time Tape Recording modeLoading a Cassette Unloading a Cassette To protect valuable recordings…To protect valuable files available only for SD Memory Card… 16 ENInfo LCD Indications Tape indicatorRecording time Battery indicator Basic RecordingJournalistic Shooting 18 ENTape Remaining Time ZoomingRecording From The Middle Of a Tape Time code cannot be resetWhen a blank portion is recorded on a tape Time CodeNormal Playback Load a cassette.  pg Set the VIDEO/MEMORY Switch to VideoTo control the speaker volume… 20 ENPlayback Zoom Shuttle SearchSlow-Motion Playback Blank Search Frame-By-Frame PlaybackWhite to Audio L Red to Audio R Yellow to Video To S-VIDEO If using a VCR, go to step22 EN To change the Image Size and/or Picture Quality,  pg Memory card indicatorNumber of shots Battery indicator Basic Shooting D.S.C. SnapshotAuto Playback Of Images 24 ENRotate the Menu Wheel Playback Of Video ClipsPlayback Of Title Images For Index Playback of video clip files, perform 26 ENIndex Playback Of Files Viewing File InformationTo protect all files stored in the memory card Protecting FilesTo Remove Protection To protect the currently displayed fileTo delete all files stored in the memory card 28 ENDeleting Files To delete the currently displayed file Memory cardFolder and File names Resetting The File NameTo Print By Selecting Still Images And Number Of Prints To Reset The Number Of Prints30 EN Initialising a Memory CardMenus with Sub Menus Menus without Sub MenusTo deactivate the selected effect… 32 ENWipe Or Fader Effects WIPE/FADERSports Press PROG.AE again. The effect indicator disappearsFactory-preset Shutter 1/50 Program AEBalance White Balance Adjustment34 EN Camera MenuManual Manual Menu36 EN System System MenuCamera Display 38 ENDisplay Menu Image size DSC MenuDSC Picture qualityVideo 40 ENVideo Menu Video Display Night-Scope LED GR-DV5000 Only 42 ENNight Scope To deactivate Night-Scope…Do not fire the flash at a person at short range Colour tone changes depending onIf Auto C is selected After shooting44 EN Self-TimerSet SELF-TIMER to on .  pg To end Self-Timer recording, select OFF in stepManual Focus To reset to Auto FocusPress Focus or set the Power Switch to a Auto FocusIris Lock 46 ENExposure Control To return to automatic white balance… Set u to AUTO.  pg , 34 Or, set the Power Switch to aBacklight Compensation Backlight compensation brightens the subject quicklyPress the Recording Start/Stop Button to stop recording 48 ENNavigation Function Before stopsFunction properly Indicator appears brieflySet the VIDEO/MEMORY switch to Video Check images before deletingTo make video clips from recorded video footage 50 ENMail Clip Recording To make video clips from real-time camera imageCard… Title ImposeTitle Selection Title RecordingTo Use The Video Light Using The Info-ShoeTo Attach The Accessories 52 ENTo use this camcorder as a player To use this camcorder as a recorderDubbing To a Video Unit Equipped With a DV in Connector Digital Dubbing54 EN Equipped With a DV OUT Connector Digital DubbingDubbing Still Images Recorded On a Tape To a Memory Card 56 ENButtons And Functions Installing The Batteries58 EN Using the Remote Control Unit pg AUX indication appears instead of MIC Audio DubbingTo hear the sound during Audio Dubbing Insert Editing 60 ENYou are now ready to try Random Assemble Editing VCR Code List VCR Brand NameRandom Assemble Editing R.A.Edit Set Remote/VCR CodeVCR other than above… A JVC VCR equipped with a Remote Pause Connector…62 EN Make ConnectionsSelect Scenes Automatic Editing To VCR Adjustment Of VCR/Camcorder Timing64 EN For More Accurate EditingUsing DV cable Using USB cableUsing DV cable Using USB cableThis camcorder can be used as a WebCam via USB connection 66 ENWebCam Items Video and D.S.C. Recording PowerSymptom Possible Causes Corrective Action 68 ENVIDEO/MEMORY Set the VIDEO/MEMORY VIDEO/MEMORY Switch is Set the VIDEO/MEMORYPress Back Light Advanced features70 EN Is discharged Other problemsFlash set to Auto or Manual Menu Place Camcorder.  pg Set B-IN Flash to Auto C to display pg , 31 Camcorder When the LCD monitor’s72 EN Angle of the LCD monitorDealer Clean the viewfinder, pleaseConsult your nearest JVC Cassettes General Battery PrecautionsBattery Packs 74 ENDo NOT… Memory CardsLCD Monitor Main UnitAbout moisture condensation How To Handle a CD-ROM76 EN Video LightAfter Use Cleaning The CamcorderSlide BATT.RELEASE 1 and remove the battery pack 2 78 EN VTR EditUSB 80 EN Other Parts ConnectorsIndicators ControlsIndications 82 ENLCD Monitor/Viewfinder Indications During Video Playback LCD Monitor/Viewfinder Indications During D.S.C. PlaybackFunction 84 ENAttempt to use titles/frames Being used as a recorderMemory card playback Attempt memory card playback86 EN Program AE With Special Effects Program AE Wide Mode Wide ModeSound Mode Sound Mode Playback soundGR-DV5000 GR-DV4000

GR-DV4000, GR-DV5000 specifications

The JVC GR-DV5000 and GR-DV4000 are compact digital camcorders that emerged in the early 2000s, representing a significant advancement in consumer video technology. Designed for both amateur and semi-professional videographers, these models are equipped with a variety of features and technologies that enhance their usability and video quality.

One of the main highlights of the GR-DV5000 is its 3CCD technology. Unlike traditional single-chip systems, the 3CCD setup uses three separate charge-coupled devices to capture light, which significantly improves color accuracy and depth. This technology allows for vibrant, true-to-life colors, making it an excellent choice for capturing critical moments in life such as weddings or family events. The GR-DV4000, while slightly lower in specification, also showcases commendable performance, providing a good balance of features and affordability.

Both camcorders feature a 10x optical zoom lens, allowing users to get close to their subjects without compromising image quality. This zoom capability is crucial for remote shots, ensuring versatility in various shooting environments, from expansive outdoor scenes to intimate indoor gatherings. The digital zoom feature extends this further, but for professional results, the optical zoom is always preferred.

The GR-DV5000 comes with enhanced manual controls that give videographers more creative freedom. Users can adjust the focus, exposure, and white balance settings manually, which is particularly beneficial when shooting in challenging lighting conditions. On the other hand, the GR-DV4000 focuses more on ease of use, making it perfect for casual users who want to point and shoot without delving deeply into technical settings.

In terms of connectivity and storage, both models utilize MiniDV tapes, which were popular for their capacity to store high-quality video. While this format may seem outdated, it provides reliable playback and archiving without the complications sometimes associated with digital storage.

The LCD screen on both camcorders facilitates easy framing and playback of footage, while the ergonomic design ensures comfort during extended use. The JVC GR-DV5000 also features a built-in stabilization system to help reduce shake during handheld shooting, further enhancing video quality.

In summary, the JVC GR-DV5000 and GR-DV4000 are remarkable camcorders that showcase the technological advancements of their time. Their standout features, such as 3CCD technology, optical zoom, and user-friendly controls, make them valuable tools for capturing memorable moments with clarity and precision. Whether for a professional project or casual use, these camcorders have cemented their place in the history of digital video recording.
Top Page Image Contents