JVC GR-DV5000 Loading a Cassette Unloading a Cassette, To protect valuable recordings…,  pg

Page 15

EN 15

Loading A Cassette

/Unloading A Cassette

The camcorder needs to be powered up to load or eject a cassette.

1Slide and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically.

Do not touch internal components.

2Insert or remove a tape and press “PUSH HERE” to close the cassette holder.

Be sure to press only the section labelled “PUSH HERE” to close the cassette holder; touching other parts may cause your finger to get caught in the cassette holder, resulting in injury or product damage.

Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.

When the battery pack’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery pack with a fully charged one or use AC power before continuing.

3Close the cassette holder cover firmly until it locks into place.

Erase protection tab

Make sure the window side is facing out.

PUSH HERE

Cassette holder

Cassette holder cover

OPEN/EJECT Switch

To protect valuable recordings…

Slide the erase protection tab on the back of the tape in the direction of “SAVE”. This prevents the tape from being recorded over. To record on this tape, slide the tab back to “REC” before loading it.

Approximate recording time

Tape

Recording mode

 

 

SP

LP

 

 

 

 

30 min.

30 min.

45 min.

 

 

 

60 min.

60 min.

90 min.

 

 

 

80 min.

80 min.

120 min.

 

 

 

To switch the recording mode, refer to pages 31 and 34.

NOTES:

It takes a few seconds for the cassette holder to open. Do not apply force.

If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again. If the cassette holder still does not open, turn the camcorder off then on again.

If the tape does not load properly, open the cassette holder cover fully and remove the cassette. A few minutes later, insert it again.

When the camcorder is suddenly moved from a cold place to a warm environment, wait a short time before opening the cassette holder cover.

Closing the cassette holder cover before the cassette holder recedes may cause damage to the camcorder.

Even when the camcorder is switched off, a cassette can be loaded or unloaded. After the cassette holder is closed with the camcorder switched off, however, it may not recede. It is recommended to turn the power on before loading or unloading.

When resuming recording, once you open the cassette holder cover a blank portion will be recorded on the tape or a previously recorded scene will be erased (recorded over) regardless of whether the cassette holder came out or not. See “Recording From The Middle Of A Tape”

( pg. 19).

GETTING STARTED

Image 15
Contents GR-DV5000 GR-DV4000 It is recommended that you… Dear CustomerPage High Temperature Warning For the Video Light provided with GR-DV5000 onlyBefore recording an important scene… BN-V408U-B Plug GR-DV4000 only DC Cord Editing Cable Lens Cap AAA R03 Battery x Memory Card 8 MBFor remote control unit USB Cable Lens HoodHow To Attach/Detach The Lens Hood How To Attach The Core Filter for optional S-Video cableHow To Use The Audio Cable How To Attach The Strap How To Attach The Lens CapReferences Rotate the Menu Wheel to select OFF, and press it Automatic Demonstration10 EN PowerCharging The Battery Pack Using The Battery PackBenefits Of Lithium-Ion Batteries Using AC PowerAbout Batteries InformationTripod Mounting Grip AdjustmentViewfinder Adjustment 12 ENPower-Linked Operation Operation ModePress it. Parameter for Day is highlighted Built-in Clock’s Rechargeable Lithium Battery pg Approximate recording time Tape Recording modeLoading a Cassette Unloading a Cassette To protect valuable recordings…To protect valuable files available only for SD Memory Card… 16 ENInfo LCD Indications Tape indicatorRecording time Battery indicator Basic RecordingJournalistic Shooting 18 ENTape Remaining Time ZoomingRecording From The Middle Of a Tape Time code cannot be resetWhen a blank portion is recorded on a tape Time CodeNormal Playback Load a cassette.  pg Set the VIDEO/MEMORY Switch to VideoTo control the speaker volume… 20 ENPlayback Zoom Shuttle SearchSlow-Motion Playback Blank Search Frame-By-Frame PlaybackIf using a VCR, go to step 22 ENWhite to Audio L Red to Audio R Yellow to Video To S-VIDEO To change the Image Size and/or Picture Quality,  pg Memory card indicatorNumber of shots Battery indicator Basic Shooting D.S.C. SnapshotAuto Playback Of Images 24 ENPlayback Of Video Clips Playback Of Title ImagesRotate the Menu Wheel For Index Playback of video clip files, perform 26 ENIndex Playback Of Files Viewing File InformationTo protect all files stored in the memory card Protecting FilesTo Remove Protection To protect the currently displayed fileTo delete all files stored in the memory card 28 ENDeleting Files To delete the currently displayed file Memory cardFolder and File names Resetting The File NameTo Print By Selecting Still Images And Number Of Prints To Reset The Number Of Prints30 EN Initialising a Memory CardMenus with Sub Menus Menus without Sub MenusTo deactivate the selected effect… 32 ENWipe Or Fader Effects WIPE/FADERSports Press PROG.AE again. The effect indicator disappearsFactory-preset Shutter 1/50 Program AEBalance White Balance Adjustment34 EN Camera MenuManual Manual Menu36 EN System System Menu38 EN Display MenuCamera Display Image size DSC MenuDSC Picture quality40 EN Video MenuVideo Video Display Night-Scope LED GR-DV5000 Only 42 ENNight Scope To deactivate Night-Scope…Do not fire the flash at a person at short range Colour tone changes depending onIf Auto C is selected After shooting44 EN Self-TimerSet SELF-TIMER to on .  pg To end Self-Timer recording, select OFF in stepManual Focus To reset to Auto FocusPress Focus or set the Power Switch to a Auto Focus46 EN Exposure ControlIris Lock To return to automatic white balance… Set u to AUTO.  pg , 34 Or, set the Power Switch to aBacklight Compensation Backlight compensation brightens the subject quicklyPress the Recording Start/Stop Button to stop recording 48 ENNavigation Function Before stopsFunction properly Indicator appears brieflySet the VIDEO/MEMORY switch to Video Check images before deletingTo make video clips from recorded video footage 50 ENMail Clip Recording To make video clips from real-time camera imageCard… Title ImposeTitle Selection Title RecordingTo Use The Video Light Using The Info-ShoeTo Attach The Accessories 52 ENTo use this camcorder as a player To use this camcorder as a recorderWith a DV in Connector Digital Dubbing 54 ENDubbing To a Video Unit Equipped Equipped With a DV OUT Connector Digital DubbingDubbing Still Images Recorded On a Tape To a Memory Card 56 ENButtons And Functions Installing The Batteries58 EN Using the Remote Control UnitAudio Dubbing To hear the sound during Audio Dubbing pg AUX indication appears instead of MIC Insert Editing 60 ENYou are now ready to try Random Assemble Editing VCR Code List VCR Brand NameRandom Assemble Editing R.A.Edit Set Remote/VCR CodeVCR other than above… A JVC VCR equipped with a Remote Pause Connector…62 EN Make ConnectionsSelect Scenes Automatic Editing To VCR Adjustment Of VCR/Camcorder Timing64 EN For More Accurate EditingUsing DV cable Using USB cableUsing DV cable Using USB cable66 EN WebCamThis camcorder can be used as a WebCam via USB connection Items Video and D.S.C. Recording PowerSymptom Possible Causes Corrective Action 68 ENVIDEO/MEMORY Set the VIDEO/MEMORY VIDEO/MEMORY Switch is Set the VIDEO/MEMORYAdvanced features 70 ENPress Back Light Is discharged Other problemsFlash set to Auto or Manual Menu Place Camcorder.  pg Set B-IN Flash to Auto C to display pg , 31 Camcorder When the LCD monitor’s72 EN Angle of the LCD monitorClean the viewfinder, please Consult your nearest JVCDealer Cassettes General Battery PrecautionsBattery Packs 74 ENDo NOT… Memory CardsLCD Monitor Main UnitAbout moisture condensation How To Handle a CD-ROM76 EN Video LightCleaning The Camcorder Slide BATT.RELEASE 1 and remove the battery pack 2After Use 78 EN Edit USBVTR 80 EN Other Parts ConnectorsIndicators ControlsIndications 82 ENLCD Monitor/Viewfinder Indications During Video Playback LCD Monitor/Viewfinder Indications During D.S.C. PlaybackFunction 84 ENAttempt to use titles/frames Being used as a recorderMemory card playback Attempt memory card playback86 EN Program AE With Special Effects Program AE Wide Mode Wide ModeSound Mode Sound Mode Playback soundGR-DV5000 GR-DV4000

GR-DV4000, GR-DV5000 specifications

The JVC GR-DV5000 and GR-DV4000 are compact digital camcorders that emerged in the early 2000s, representing a significant advancement in consumer video technology. Designed for both amateur and semi-professional videographers, these models are equipped with a variety of features and technologies that enhance their usability and video quality.

One of the main highlights of the GR-DV5000 is its 3CCD technology. Unlike traditional single-chip systems, the 3CCD setup uses three separate charge-coupled devices to capture light, which significantly improves color accuracy and depth. This technology allows for vibrant, true-to-life colors, making it an excellent choice for capturing critical moments in life such as weddings or family events. The GR-DV4000, while slightly lower in specification, also showcases commendable performance, providing a good balance of features and affordability.

Both camcorders feature a 10x optical zoom lens, allowing users to get close to their subjects without compromising image quality. This zoom capability is crucial for remote shots, ensuring versatility in various shooting environments, from expansive outdoor scenes to intimate indoor gatherings. The digital zoom feature extends this further, but for professional results, the optical zoom is always preferred.

The GR-DV5000 comes with enhanced manual controls that give videographers more creative freedom. Users can adjust the focus, exposure, and white balance settings manually, which is particularly beneficial when shooting in challenging lighting conditions. On the other hand, the GR-DV4000 focuses more on ease of use, making it perfect for casual users who want to point and shoot without delving deeply into technical settings.

In terms of connectivity and storage, both models utilize MiniDV tapes, which were popular for their capacity to store high-quality video. While this format may seem outdated, it provides reliable playback and archiving without the complications sometimes associated with digital storage.

The LCD screen on both camcorders facilitates easy framing and playback of footage, while the ergonomic design ensures comfort during extended use. The JVC GR-DV5000 also features a built-in stabilization system to help reduce shake during handheld shooting, further enhancing video quality.

In summary, the JVC GR-DV5000 and GR-DV4000 are remarkable camcorders that showcase the technological advancements of their time. Their standout features, such as 3CCD technology, optical zoom, and user-friendly controls, make them valuable tools for capturing memorable moments with clarity and precision. Whether for a professional project or casual use, these camcorders have cemented their place in the history of digital video recording.