LIGHT OFF/AUTO/ON Switch
DANGER
■The video light can become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.
■Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot for some time.
■When operating, keep a distance of about 30 cm. (1 ft.) between the video light and people or objects.
■Do not use near flammable or explosive materials.
■It is recommended that you consult your nearest JVC dealer for replacing the video light.
EN23
FEATURE: Video Light
PURPOSE:
To brighten the scene when natural lighting is too dim.
OPERATION:
1)Set the LIGHT OFF/AUTO/ON Switch as required:
OFF : Turns off the light.
AUTO : Automatically turns on the light when the camcorder senses insufficient lighting on the subject.
ON : Always keeps the light on as long as the camcorder is turned on.
■ The video light can only be used with the |
| |||
camcorder’s power on. |
|
| ||
|
| |||
■ It is recommended to set the white balance |
| |||
(☞ pg. 36) to | when you use the video light. | RECORDING | ||
■ When not using the video light, turn it off to save | ||||
| ||||
battery power. |
|
|
| |
NOTES: |
|
|
| |
● Even if the battery indicator ( | ) does not blink if |
| ||
the battery pack’s charge is low, the camcorder may |
| |||
turn off automatically when you turn on the video |
| |||
light, or when you start recording with the video light |
| |||
turned on. |
|
|
| |
● When the LIGHT OFF/AUTO/ON Switch is set to |
| |||
“AUTO”: |
|
|
| |
•Depending on the lighting conditions, the video |
| |||
light may keep turning on and off. In this case, |
| |||
manually switch the light on or off using the |
| |||
LIGHT OFF/AUTO/ON switch. |
|
| ||
•While the “Sports” or “High Speed Shutter” mode |
| |||
(☞ pg. 27) is engaged, the light is likely to stay on. |
| |||
•While the “Twilight” mode (☞ pg. 27) is engaged, |
| |||
the light will not activate. |
|
| ||