JVC GR-AXM511 During recording, the indications do not appear, Tape will not eject, Fingerprints

Page 52

52ENTROUBLESHOOTING

(cont.)

SYMPTOM

POSSIBLE CAUSE(S)

OTHER

During recording, the indications do not appear.

Press DISPLAY for longer than 1 second to make the indications appear (pg. 17).

The tape will not eject.

The battery pack is running low.

 

If the LCD monitor is not open over 60 degrees, the EJECT

 

Switch does not function.

 

 

Some functions are not available.

The Power Switch is set to “AUTO”.

 

Certain combinations of modes or effects are not possible

 

to use.

 

 

Vertical white lines appear when

This sometimes occurs when the contrast between the

shooting a very bright object.

background and the object is great. It is not a defect of the

 

camcorder.

 

 

Bright, crystal-shaped spots appear in

Sunlight is directly entering the lens. This is not a defect of

the LCD monitor and the viewfinder.

the camcorder.

 

 

The rear of the LCD monitor is hot.

The light used to illuminate the LCD monitor causes it to be

 

hot. Close the LCD monitor to turn it off or set the Power

 

Switch to “OFF”, and let the unit cool down.

 

 

Colored bright spots appear all over

The LCD monitor and the viewfinder are made with high-

the LCD monitor or the viewfinder.

precision technology. However, black spots or bright spots

 

of light (red, green or blue) may appear constantly on the

 

LCD monitor or in the viewfinder. These spots are not

 

recorded on the tape. This is not due to any defect of the

 

unit. (Effective dots: more than 99.99 %.)

 

 

The indicators and the picture color

This may occur when the surface or the edge of the LCD

on the LCD monitor are not clear.

monitor is pressed.

 

 

The LCD monitor, the viewfinder and

Wipe them gently with a soft cloth. Gently wipe in a

the lens have become dirty (ex.

semicircular motion, as wiping strongly spreads the stain

fingerprints).

and it won’t come out easily.

 

 

The picture is blurred in the Quick

This is normal while recording in the EP mode. Some noise

Review or Retake mode.

may be present while recording in the SP mode (pg. 12).

 

 

An error number (i.e. E03) appears.

Turn the camcorder’s power off, then disconnect the power

 

source. After a few minutes, try turning the power on again.

 

If the error number still appears in the viewfinder, consult

 

your nearest JVC dealer.

 

 

The image is out of focus.

The diopter needs to be adjusted (pg. 15).

 

The scene being shot is adversely affecting the operation of

 

Auto Focus (pg. 34).

 

 

The date and time displays

If you remove the power source from the camcorder while

disappear.

the power is on, all settings and selections are erased. Make

 

sure to turn the camcorder’s power off before disconnecting

 

the power source.

 

 

The wrong date and time are

If you have not performed Date/Time Setting (pg. 11),

displayed/recorded.

the date and time are not displayed/recorded correctly. Be

 

sure that Date/Time setting is carried out.

Even though the lens cover is open, the Lens Cover Warning indicator blinks.

The Lens Cover Warning indicator may blink when the camcorder is used in dark areas, regardless of the position of the lens cover.

Image 52
Contents GR-AXM511 For Customer UseFor clock operation and remote control unit It is recommended that youImportant Product Safety Instructions To avoid personal injury If the product has been dropped or damaged in any wayQuick Operation Guide For more detailsRemote Control Cassettes marked can be used with this camcorderZoom Zoom out Cassette AdapterContents Power Supply PowerAttach Battery Pack Detach Battery PackEN9 DischargedClock Lithium Battery Insertion/Removal Switch OFF PowerRemove Battery Holder Insert Battery in HolderDate/Time Settings Recording Mode Setting Tape Length SettingSET Recording Mode ContLoading/Unloading a Cassette Grip Adjustment Viewfinder AdjustmentAdjust Length Shoulder Strap AttachmentTripod Mounting Attach StrapPower Switch Position Basic RecordingLoad a Cassette Start ShootingLCD Monitor/Viewfinder Indications Stop RecordingPress Display Button RecordingShooting While Watching The LCD Monitor Recording Basic RecordingBefore the following steps, perform pg Interface Shooting Journalistic ShootingBrightness Control Push the Power Zoom Lever towards T EN Recording Basic FeaturesZoom Feature Quick Review To check the end of the last recordingFeature Picture Stabilizer Basic FeaturesPress P. STABILIZER. appears Feature Video Light To brighten the scene when natural lighting is too dimWhen not using the video light, turn it off to save Battery powerRecording Advanced Features SnapshotTake Snapshot If you press during Record-StandbyModeengage FADE- or WIPE-STANDBY Fade/WipeStart or END Recording Advanced Features Select ModeProgram AE With Special Effects Press P.AE to cycle through the modes as shown on the leftDisplay Mode Nega Posi modeHigh shutter speed clearly captures fast-moving action Colors of a picture are reversedDate/Time Insert Press the Select Dial to display the Menu ScreenAccess Title Menu Select the Desired ModeInstant Titles RETURN. Then press the Select Dial to close Menu ScreenMake Setting Using Menu For Detailed AdjustmentEND Setting Menu Screen Available Using The Select Dial Menu Screen Available Using The Menu ButtonTally lamp comes on to signal the start of recording Demo Mode is set to on and the Menu Screen is closedAllows you to set the current date and time pg Recording pgAccess Exposure Menu Access Manual ExposureAdjust Exposure END Adjustment of ExposureFocusing Patterns that are regularly repeatedAccess Focus Menu Access Manual FocusAdjust Focus END Adjustment of FocusWhite Balance Adjustment Access White Balance AdjustmentSET Function Parameters To Return To Automatic White BalanceEnter Setting Manual White Balance OperationSET Manual White Balance To Change The Tint For RecordingSelf-Timer Access INT. Time MenuStart Delayed Recording To Cancel Self-TimerAnimation Time-LapsePlayback Basic Playback Rewind or Fast-Forward the tapePlay Back Stop PlaybackSpeaker Volume Control Adjust VolumeTracking Activate Manual TrackingPlayback Features Feature Still PlaybackFeature Shuttle Search Feature Counter Memory FunctionInsert Battery Using The Cassette Adapter EN43Cassette Adapter VHS Playpak When connecting the cables, open this cover Basic Connections And Tape DubbingBasic Connections Connection For Tape DubbingTape Dubbing Pull OUT Battery Holder Remote control uses one lithium battery CR2025Functions ButtonsFeature Self-Timer, Animation and Time-Lapse Self-TimerAnimation Time-LapseReset Counter Insert EditingFind EDIT-OUT Point Begin Insert EditingBegin Audio Dubbing Audio DubbingEND Audio Dubbing Cleaning The Camcorder After UseNo power is supplied Recording does not startAnimation or Time-Lapse is not AvailableIndicators and the picture color Review or Retake modeAn error number i.e. E03 appears During recording, the indications do not appearClock Battery Warning Tape Remaining TimeDisplayed and the tape remaining time warning Condensation Warning54EN Video Light Switch Power Switch Battery Release SwitchDC in Jack Connectors w to r are located beneath the cover Tally Lamp Power LampRemote Control Pg , 9Quick Review Darken The LCD MonitorWhen using the AC Power Adapter/Charger in areas To prevent damage and prolong service lifeOther than the USA To avoid hazardFor safety, do not Avoid using the unitTo prolong service life During useProvided Accessories Optional Accessories ConnectorsGeneral Alimentación AlimentacionColocacion DE LA Bateria Indicador de cargaDeslice Battery Release y extraiga la batería Guia Para Operacion RapidaEN for Servicing Only in U.S.A Warranty Only in U.S.A. EN63 GR-AXM511

GR-AXM511 specifications

The JVC GR-AXM511 is a versatile camcorder that revolutionizes the way users capture memories. Launched in the late 1990s, this model features a compact and lightweight design that makes it easy to carry, ensuring that spontaneous moments can be captured effortlessly. The camcorder is equipped with a 700x digital zoom lens and a 34x optical zoom, allowing users to zoom in on distant subjects while maintaining image clarity.

One of the standout features of the JVC GR-AXM511 is its advanced image stabilization technology, which significantly reduces the shakiness often associated with handheld recording. This feature is particularly beneficial during dynamic shooting scenarios, such as sports events or while on the move, ensuring that the final footage remains steady and professional-looking.

The GR-AXM511 supports the use of S-VHS-C tapes, which enhances the recording quality by providing better resolution and color reproduction compared to standard VHS tapes. This adaptability to high-quality media makes it an ideal choice for both casual users and budding videographers. The camcorder also features a built-in microphone and supports external microphones, giving users flexibility in audio capture.

Additionally, the model incorporates a 2.5-inch LCD display, making it convenient for users to frame their shots and navigate the camcorder's settings. The intuitive on-screen menu allows for easy access to various functions, such as adjusting exposure and white balance, which helps in achieving the desired look for any recording scenario.

Powering the JVC GR-AXM511 is a rechargeable battery that provides ample recording time, allowing users to capture events without the anxiety of running out of power mid-shoot. This is complemented by its quick-start feature, which ensures that the camcorder is ready to record within seconds when an unexpected moment arises.

Overall, the JVC GR-AXM511 stands out for its combination of portability, image quality, and user-friendly features. Its integration of significant technologies for sound and video recording makes it a noteworthy option for anyone looking to document their life creatively. Whether for home videos or more serious projects, the GR-AXM511 remains a reliable and effective tool for capturing memories.