JVC GR-AXM511 No power is supplied, Recording does not start, Animation or Time-Lapse is not

Page 51

TROUBLESHOOTINGEN51

If, after following the steps in the chart below, the problem still exists, please consult your JVC dealer.

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and proceed as usual from the beginning.

SYMPTOM

 

POSSIBLE CAUSE(S)

POWER

 

 

No power is supplied.

 

The battery pack has not been attached correctly

 

 

(pg. 8).

 

 

The battery pack is not charged (pg. 8).

 

 

The power supply has not been correctly connected

 

 

(pg. 9).

 

 

 

The power suddenly goes off and

 

The battery pack has completely discharged.

does not come back on by itself.

 

Remove the cassette and disconnect the power source, then

 

 

after a few minutes, try turning the power back on. If it still

 

 

does not come on, consult your nearest JVC dealer.

 

 

 

RECORDING

 

 

Recording cannot be performed.

 

Make sure the Erase Protection tab is in the position that

 

 

allows recording. If not, slide the tab. Some cassettes have

 

 

removable tabs. If the tab has been removed, cover the

 

 

hole with adhesive tape.

 

 

 

Recording does not start.

 

The camcorder Power Switch has not been set to

 

 

“CAMERA” (“AUTO“ or “PRO“.) (pg. 16).

 

 

 

Animation or Time-Lapse is not

 

Before recording in the Animation mode at the very

available.

 

beginning of a tape, set the camcorder to the Recording

 

 

mode for about 5 seconds, so that the tape runs smoothly.

 

 

Using the Fade-in function at this point is a good way to

 

 

begin an animated program (pg. 39, 47).

 

 

 

PLAYBACK

 

 

The tape is running, but there is no

 

The TV has not been set to its VIDEO mode or channel.

playback picture.

 

If A/V connection is used, the TV’s VIDEO/TV Switch has

 

 

not been set to VIDEO.

 

 

 

Playback picture is blurred or

 

The video heads are dirty or worn out. Consult your nearest

interrupted.

 

JVC dealer for head cleaning or replacement.

 

 

 

The counter indication is blurred

 

This is normal.

during Still playback.

 

 

 

 

 

TAPE TRANSPORT

 

 

The tape stops during fast-forward or

 

The Counter Memory Function has been activated

rewind.

 

(pg. 42).

Rewinding or fast-forwarding cannot

The tape is already fully wound on one reel or the other.

be performed.

 

Image 51
Contents For Customer Use GR-AXM511It is recommended that you For clock operation and remote control unitImportant Product Safety Instructions If the product has been dropped or damaged in any way To avoid personal injuryFor more details Quick Operation GuideCassette Adapter Remote ControlCassettes marked can be used with this camcorder Zoom Zoom outContents Detach Battery Pack PowerSupply Power Attach Battery PackDischarged EN9Insert Battery in Holder Clock Lithium Battery Insertion/RemovalSwitch OFF Power Remove Battery HolderDate/Time Settings Cont Recording Mode SettingTape Length Setting SET Recording ModeLoading/Unloading a Cassette Viewfinder Adjustment Grip AdjustmentAttach Strap Adjust LengthShoulder Strap Attachment Tripod MountingStart Shooting Power Switch PositionBasic Recording Load a CassetteRecording LCD Monitor/Viewfinder IndicationsStop Recording Press Display ButtonRecording Basic Recording Shooting While Watching The LCD MonitorBefore the following steps, perform pg Journalistic Shooting Interface ShootingBrightness Control EN Recording Basic Features Push the Power Zoom Lever towards TZoom To check the end of the last recording Feature Quick ReviewBasic Features Feature Picture StabilizerPress P. STABILIZER. appears Battery power Feature Video LightTo brighten the scene when natural lighting is too dim When not using the video light, turn it off to saveIf you press during Record-Standby Recording Advanced FeaturesSnapshot Take SnapshotFade/Wipe Modeengage FADE- or WIPE-STANDBYStart or END Recording Press P.AE to cycle through the modes as shown on the left Advanced FeaturesSelect Mode Program AE With Special EffectsColors of a picture are reversed Display ModeNega Posi mode High shutter speed clearly captures fast-moving actionPress the Select Dial to display the Menu Screen Date/Time InsertRETURN. Then press the Select Dial to close Menu Screen Access Title MenuSelect the Desired Mode Instant TitlesUsing Menu For Detailed Adjustment Make SettingEND Setting Menu Screen Available Using The Menu Button Menu Screen Available Using The Select DialRecording pg Tally lamp comes on to signal the start of recordingDemo Mode is set to on and the Menu Screen is closed Allows you to set the current date and time pgEND Adjustment of Exposure Access Exposure MenuAccess Manual Exposure Adjust ExposurePatterns that are regularly repeated FocusingEND Adjustment of Focus Access Focus MenuAccess Manual Focus Adjust FocusTo Return To Automatic White Balance White Balance AdjustmentAccess White Balance Adjustment SET Function ParametersTo Change The Tint For Recording Enter SettingManual White Balance Operation SET Manual White BalanceTo Cancel Self-Timer Self-TimerAccess INT. Time Menu Start Delayed RecordingTime-Lapse AnimationStop Playback Playback Basic PlaybackRewind or Fast-Forward the tape Play BackActivate Manual Tracking Speaker Volume ControlAdjust Volume TrackingFeature Counter Memory Function Playback FeaturesFeature Still Playback Feature Shuttle SearchUsing The Cassette Adapter EN43 Insert BatteryCassette Adapter VHS Playpak Connection For Tape Dubbing When connecting the cables, open this coverBasic Connections And Tape Dubbing Basic ConnectionsTape Dubbing Buttons Pull OUT Battery HolderRemote control uses one lithium battery CR2025 FunctionsTime-Lapse Feature Self-Timer, Animation and Time-LapseSelf-Timer AnimationBegin Insert Editing Reset CounterInsert Editing Find EDIT-OUT PointAudio Dubbing Begin Audio DubbingEND Audio Dubbing After Use Cleaning The CamcorderAvailable No power is suppliedRecording does not start Animation or Time-Lapse is notDuring recording, the indications do not appear Indicators and the picture colorReview or Retake mode An error number i.e. E03 appearsCondensation Warning Clock Battery WarningTape Remaining Time Displayed and the tape remaining time warning54EN Tally Lamp Power Lamp Video Light SwitchPower Switch Battery Release Switch DC in Jack Connectors w to r are located beneath the coverDarken The LCD Monitor Remote ControlPg , 9 Quick ReviewTo avoid hazard When using the AC Power Adapter/Charger in areasTo prevent damage and prolong service life Other than the USADuring use For safety, do notAvoid using the unit To prolong service lifeConnectors Provided Accessories Optional AccessoriesGeneral Indicador de carga AlimentaciónAlimentacion Colocacion DE LA BateriaGuia Para Operacion Rapida Deslice Battery Release y extraiga la bateríaEN for Servicing Only in U.S.A Warranty Only in U.S.A. EN63 GR-AXM511

GR-AXM511 specifications

The JVC GR-AXM511 is a versatile camcorder that revolutionizes the way users capture memories. Launched in the late 1990s, this model features a compact and lightweight design that makes it easy to carry, ensuring that spontaneous moments can be captured effortlessly. The camcorder is equipped with a 700x digital zoom lens and a 34x optical zoom, allowing users to zoom in on distant subjects while maintaining image clarity.

One of the standout features of the JVC GR-AXM511 is its advanced image stabilization technology, which significantly reduces the shakiness often associated with handheld recording. This feature is particularly beneficial during dynamic shooting scenarios, such as sports events or while on the move, ensuring that the final footage remains steady and professional-looking.

The GR-AXM511 supports the use of S-VHS-C tapes, which enhances the recording quality by providing better resolution and color reproduction compared to standard VHS tapes. This adaptability to high-quality media makes it an ideal choice for both casual users and budding videographers. The camcorder also features a built-in microphone and supports external microphones, giving users flexibility in audio capture.

Additionally, the model incorporates a 2.5-inch LCD display, making it convenient for users to frame their shots and navigate the camcorder's settings. The intuitive on-screen menu allows for easy access to various functions, such as adjusting exposure and white balance, which helps in achieving the desired look for any recording scenario.

Powering the JVC GR-AXM511 is a rechargeable battery that provides ample recording time, allowing users to capture events without the anxiety of running out of power mid-shoot. This is complemented by its quick-start feature, which ensures that the camcorder is ready to record within seconds when an unexpected moment arises.

Overall, the JVC GR-AXM511 stands out for its combination of portability, image quality, and user-friendly features. Its integration of significant technologies for sound and video recording makes it a noteworthy option for anyone looking to document their life creatively. Whether for home videos or more serious projects, the GR-AXM511 remains a reliable and effective tool for capturing memories.