JVC GR-DVL166 specifications 30 EN, Exposure Control, Iris Lock

Page 30

30 EN

FOR RECORDING (cont.)

Exposure Control

Manual exposure adjustment is recommended in the following situations:

•When shooting using reverse lighting or when the background is too bright.

•When shooting on a reflective natural background such as at the beach or when skiing.

•When the background is overly dark or the subject light.

1 Set the Power Switch to “

” while pressing

MANUAL

 

down the Lock Button located on the switch.

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.

3 Rotate the MENU/BRIGHT wheel to select “ EXPOSURE”, then press it.

4 Rotate the MENU/BRIGHT wheel to select “MANUAL”, then press it. The Menu Screen disappears. The exposure control indicator appears.

5 Rotate the MENU/BRIGHT wheel towards “+” to brighten the image, or towards “–to” darken the image. (maximum ±6)

6 Press the MENU/BRIGHT wheel in. Exposure adjustment is complete.

To Return To Automatic Exposure Control . . .

..... select “AUTO” in step 4. Or, set the Power Switch

to “ ”.

 

 

AUTO

 

 

To Brighten The Subject Quickly . . .

..... press BACKLIGHT.

 

is displayed and the

 

subject is brightened. If pressed again, disappears and the brightness returns to the previous level.

•+3 exposure has the same effect as the BACKLIGHT Button.

•Using BACKLIGHT may cause the light around the subject to become too bright and the subject to become white.

•Backlight compensations is also available when the

Power Switch is set to “

”.

AUTO

 

NOTE:

You cannot use the manual exposure control at the same time with backlight, spotlight ( pg. 25) compensation and “SNOW” ( pg. 25).

Iris Lock

Use this function in the following situations:

•When shooting a moving subject.

•When the distance to the subject changes (so its size in the LCD monitor or the viewfinder changes), such as when the subject is backing away.

•When shooting on a reflective natural background such as at the beach or when skiing.

•When shooting objects under a spotlight.

•When zooming.

When the subject is close, keep the iris locked. Even when the subject moves away from you, the image will not darken or brighten.

Before the following steps, perform steps 1 through 4 of “Exposure Control”.

5 Adjust zoom so that the subject fills the LCD monitor or the viewfinder, then press and hold the MENU/BRIGHT wheel for over 2 seconds. The exposure control indicator and “ ” appear.

Press the MENU/BRIGHT wheel in. “ ” changes to “ ” and the iris is locked.

Iris lock indicator

3

MENU/BRIGHT Wheel

BACKLIGHT Button (5)

Power Switch

To Return To Automatic Iris Control . . .

..... rotate MENU/BRIGHT to display “AUTO” then

press it in step 4. The exposure control indicator and “ ” disappear. Or, set the Power switch to

“AUTO ”.

To Lock The Exposure Control And The Iris . . .

..... after step 4 of “Exposure Control”, adjust the

exposure rotating the MENU/BRIGHT wheel. Then lock the iris in step 5 of “Iris Lock”. For automatic locking, rotate the MENU/BRIGHT wheel to select “AUTO”, then press it in step 4. The iris becomes automatic after about 2 seconds.

Iris

Like the pupil of the human eye, it contracts in well-lit environments to keep too much light from entering, and dilates in dim environments to allow in more light.

Page 29 Page 31
Image 30
Page 29 Page 31
Contents GR-DVL166 Dear Customer It is recommended that youBlue to N Neutral or Black Brown to L Live or Red Some DO’S and DON’TS on the Safe USE of Equipment Above ALLBefore recording an important scene How To Attach The Lens Cap How To Attach The Core Filter While pressing downGetting Started Battery pack Charging time PowerCharging the Battery Pack To Detach The Battery PackAbout Batteries Using the Battery PackUsing AC Power Approximate recording time10 EN Grip AdjustmentViewfinder Adjustment Shoulder Strap AttachmentMENU/BRIGHT Wheel Power Lamp Date/Time SettingsSet the Power Switch to Lock Button DisplayApproximate recording time Tape Recording mode 12 ENLoading/Unloading a Cassette Recording Mode Setting Set the tape recording mode depending on your preferenceMenu Screen 14 EN Basic Recording Remove the lens cap Set the Power Switch toTo Adjust The Brightness Of The Display To Stop Recording16 EN Operation ModePower Switch Position Journalistic ShootingZoom Slide the Power Zoom Lever towards TTo brighten the scene when natural lighting is too dim Zoom OutTime Code When a blank portion is recorded on a tape18 EN Proper recordingTo Control The Speaker Volume Normal PlaybackSpeaker 20 EN ConnectionsCamcorder If using a VCR . . . go to step If not . . . go to step Turn on the camcorder, the VCR and the TVBlank Search To cancel Blank Search midway22 EN PressAdvanced Features Night-Scope To Deactivate The Selected Mode24 EN To Deactivate Night-ScopeSpotlight ShutterSnow TwilightFade/Wipe Effects Power Switch Recording Start/Stop Button26 EN To Deactivate The Selected EffectFader And Wipe Menu Snapshot Snapshot Mode Selection28 EN Snapshot RecordingFocus detection zone While focusing on a nearer subjectTo obtain correct focus Subject30 EN Exposure ControlIris Lock Cloud White Balance AdjustmentManual White Balance Operation HalogenWIPE/FADER 32 ENFor Recording Menu Program AEMenu Screen Explanations Wide OFF Manual System Tele OFFMacro CinemaSystem Display Demo OFF CAM CancelReset Execute LCDFor Playback Menu Following procedure applies to all except Synchro Comp  pg36 EN Lock Button Recording Start/Stop ButtonSound Mode Playback SoundDisplay VCR 38 ENDubbing To a VCR Cvbs Video outDV cable To DV Lock ButtonCore filter Core filter To DV40 EN Lock holeKnob Remote sensor This function is unavailable with this camcorder 42 EN Remote sensor RM-V700U optional Zoom ButtonsNormal playback Press T SET REMOTE/VCR Code VCR Recording deckThis one 44 EN Connect the editing cable to the Remote Pause connectorConnect the editing cable to the R.A.EDIT Connector Make ConnectionsSelect Scenes Remote sensor RM-V700U optional46 EN Automatic Editing to VCREditing Menu Diagnosing VCR/CAMCORDER Timing Adjustment of VCR/CAMCORDER TimingFor More Accurate Editing ProgrammeAudio Dubbing Set 12BIT Mode to Sound 2 or MIX Menu Screen  pg48 EN To hear the dubbed sound during playbackInsert Editing Using PC connection cable Using DV cable50 EN References 52 EN Cold, charging may be incompleteSepia or Monotone mode is  pg Activated Used  pg Colour of SnapshotFind a white subject and compose 54 EN Turn the speaker volume down Or set the Power Switch to OFFIndicators Rear of the LCD monitor56 EN Remove Cassette holder Cleaning The CamcorderAfter Use BATT. Release Button58 EN Dirty heads can cause the following problems For safety, do notAvoid using the unit Do not leave the unit60 EN Audio output Power requirementVideo Output JlipIndex Controls, Connectors And Indicators 62 ENVideo Light Switch  pg OPEN/EJECT Switch  pgPower Switch DC Input Connector  pg Digital Video Connector64 EN Appears when the Power Switch is set to pg Appears when Night-Scope is engaged Index IndicationsVolume Displays the sound modeLCD Monitor/Viewfinder Indications During Playback 66 EN Darken The LCD Monitor Backlight CompensationChannels Left/Right Erase ProtectionVideo Light Pg , 35Unload a Tape White Balance

GR-DVL166 specifications

The JVC GR-DVL166 is a compact digital video camcorder that was designed for both amateurs and budding filmmakers seeking to capture high-quality footage without the complexities of more advanced systems. Released in the early 2000s, this model has a range of impressive features and characteristics that set it apart in its class.

One of the standout features of the GR-DVL166 is its ability to record in a 16:9 aspect ratio, which was a key innovation at the time. This widescreen feature allows users to capture a cinematic feel in their home videos, making it particularly appealing for those who wanted to create more engaging visual content. The camcorder also boasts a 1/6-inch 680,000 pixel CCD image sensor, which delivers quality video that remains vibrant and clear, even in various lighting conditions.

Another noteworthy characteristic of the GR-DVL166 is its 20x optical zoom lens. This impressive zoom capability allows users to get up close to the action without sacrificing image quality. In addition to the optical zoom, the camcorder also supports a digital zoom feature, extending the range even further. However, it's the optical zoom that truly enhances the overall shooting experience, making it versatile for different filming scenarios.

The GR-DVL166 incorporates a built-in USB 2.0 interface, making it easier for users to transfer their footage to a computer for editing or sharing. This connectivity option was ahead of its time and simplified the post-production process. It also features a FireWire (IEEE 1394) connection, facilitating faster data transfer rates, particularly beneficial for larger video files.

The ergonomics of the JVC GR-DVL166 are also commendable. Its lightweight design, combined with an easy-to-navigate interface and a 2.5-inch LCD screen, ensures that users can easily handle the device and monitor their shots with precision. The LCD is flip-out, providing flexibility for shooting from different angles.

Battery life is another positive aspect, with the camcorder providing ample recording time on a single charge, which is ideal for capturing events that may require extended filming periods.

Overall, the JVC GR-DVL166 remains a notable choice for entry-level videographers. With its combination of a wide aspect ratio, optical zoom capabilities, user-friendly features, and solid build quality, it provides an appealing option for those looking to capture their memories in a more cinematic fashion. As digital photography and videography continue to evolve, models like the GR-DVL166 highlight the technological advancements of their time and their lasting impact on consumer video recording.
Top Page Image Contents