JVC GR-DVL166 specifications For safety, do not, Avoid using the unit, Do not leave the unit

Page 59

EN 59

Main Unit

1.For safety, DO NOT . . .

... open the camcorder’s chassis.

... disassemble or modify the unit.

... short-circuit the terminals of the battery pack. Keep it away from metallic objects when not in use.

... allow inflammables, water or metallic objects to enter the unit.

... remove the battery pack or disconnect the power supply while the power is on.

... leave the battery pack attached when the camcorder is not in use.

2.Avoid using the unit . . .

... in places subject to excessive humidity or dust.

... in places subject to soot or steam such as near a cooking stove.

... in places subject to excessive shock or vibration.

... near a television set.

... near appliances generating strong magnetic or electric fields (speakers, broadcasting antennas, etc.).

... in places subject to extremely high (over 40°C) extremely low (under 0°C) temperatures.

3.DO NOT leave the unit . . .

... in places of over 50°C.

... in places where humidity is extremely low (below 35%) or extremely high (above 80%).

... in direct sunlight.

... in a closed car in summer.

... near a heater.

4.To protect the unit, DO NOT . . .

... allow it to become wet.

... drop the unit or strike it against hard objects.

... subject it to shock or excessive vibration during transportation.

... keep the lens directed at extremely bright objects for long periods.

... expose the lens to direct sunlight.

... carry it by holding the LCD monitor or the viewfinder.

... swing it excessively when using the shoulder strap or the grip.

5. Dirty heads can cause the following problems:

No picture during playback.

Blocks of noise appear during playback.

During recording or playback, the Head Clog

Warning indicator ” appears.

• Recording cannot be performed properly.

In such cases, use an optional cleaning cassette. Insert it and play back. If the cassette is used more than once consecutively, damage to the video heads may result. After the camcorder plays back for about 20 seconds, it stops automatically. Also refer to the cleaning cassette’s instructions.

If, after using the cleaning cassette, the problems still exist, consult your nearest JVC dealer. Mechanical moving parts used to move the video heads and video tape tend to become dirty and worn out over time. In order to maintain a clear picture at all times, periodic check-ups are recommended after using the unit for about 1,000 hours. For periodic check-ups please consult your nearest JVC dealer.

About moisture condensation . . .

You have observed that pouring a cold liquid into a glass will cause drops of water to form on the glass outer surface. This same phenomenon occurs on the head drum of a camcorder when it is moved from a cool place to a warm place, after heating a cold room, under extremely humid conditions or in a place directly subjected to the cool air from an air conditioner.

Moisture on the head drum can cause severe damage to the video tape, and can lead to internal damage to the camcorder itself.

Serious malfunctioning

If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer.

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Adapter, etc.) and wait a few minutes and then re-connect it and proceed as usual from the beginning.

Image 59
Contents GR-DVL166 Blue to N Neutral or Black Brown to L Live or Red Dear CustomerIt is recommended that you Above ALL Some DO’S and DON’TS on the Safe USE of EquipmentBefore recording an important scene How To Attach The Lens Cap While pressing down How To Attach The Core FilterGetting Started To Detach The Battery Pack PowerCharging the Battery Pack Battery pack Charging timeApproximate recording time Using the Battery PackUsing AC Power About BatteriesShoulder Strap Attachment Grip AdjustmentViewfinder Adjustment 10 ENLock Button Display Date/Time SettingsSet the Power Switch to MENU/BRIGHT Wheel Power LampLoading/Unloading a Cassette Approximate recording time Tape Recording mode12 EN Menu Screen Recording Mode SettingSet the tape recording mode depending on your preference 14 EN To Stop Recording Remove the lens cap Set the Power Switch toTo Adjust The Brightness Of The Display Basic RecordingJournalistic Shooting Operation ModePower Switch Position 16 ENZoom Out Slide the Power Zoom Lever towards TTo brighten the scene when natural lighting is too dim ZoomProper recording When a blank portion is recorded on a tape18 EN Time CodeSpeaker To Control The Speaker VolumeNormal Playback Camcorder 20 ENConnections Turn on the camcorder, the VCR and the TV If using a VCR . . . go to step If not . . . go to stepPress To cancel Blank Search midway22 EN Blank SearchAdvanced Features To Deactivate Night-Scope To Deactivate The Selected Mode24 EN Night-ScopeTwilight ShutterSnow SpotlightTo Deactivate The Selected Effect Power Switch Recording Start/Stop Button26 EN Fade/Wipe EffectsFader And Wipe Menu Snapshot Recording Snapshot Mode Selection28 EN SnapshotSubject While focusing on a nearer subjectTo obtain correct focus Focus detection zoneIris Lock 30 ENExposure Control Halogen White Balance AdjustmentManual White Balance Operation CloudProgram AE 32 ENFor Recording Menu WIPE/FADERMenu Screen Explanations Cinema Manual System Tele OFFMacro Wide OFFLCD CAM CancelReset Execute System Display Demo OFFLock Button Recording Start/Stop Button Following procedure applies to all except Synchro Comp  pg36 EN For Playback MenuDisplay Sound ModePlayback Sound Cvbs Video out 38 ENDubbing To a VCR VCRCore filter To DV To DV Lock ButtonCore filter DV cableKnob Remote sensor 40 ENLock hole This function is unavailable with this camcorder Normal playback Press T 42 ENRemote sensor RM-V700U optional Zoom Buttons This one SET REMOTE/VCR CodeVCR Recording deck Make Connections Connect the editing cable to the Remote Pause connectorConnect the editing cable to the R.A.EDIT Connector 44 ENRemote sensor RM-V700U optional Select ScenesEditing Menu 46 ENAutomatic Editing to VCR Programme Adjustment of VCR/CAMCORDER TimingFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingTo hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen  pg48 EN Audio DubbingInsert Editing 50 EN Using PC connection cableUsing DV cable References Cold, charging may be incomplete 52 ENFind a white subject and compose Sepia or Monotone mode is  pg ActivatedUsed  pg Colour of Snapshot 54 EN Rear of the LCD monitor Or set the Power Switch to OFFIndicators Turn the speaker volume down56 EN BATT. Release Button Cleaning The CamcorderAfter Use Remove Cassette holder58 EN Do not leave the unit For safety, do notAvoid using the unit Dirty heads can cause the following problems60 EN Jlip Power requirementVideo Output Audio output62 EN Index Controls, Connectors And IndicatorsDC Input Connector  pg Digital Video Connector OPEN/EJECT Switch  pgPower Switch Video Light Switch  pgIndex Indications Appears when the Power Switch is set to pg Appears when Night-Scope is engaged 64 ENLCD Monitor/Viewfinder Indications During Playback VolumeDisplays the sound mode 66 EN Erase Protection Backlight CompensationChannels Left/Right Darken The LCD MonitorWhite Balance Pg , 35Unload a Tape Video Light

GR-DVL166 specifications

The JVC GR-DVL166 is a compact digital video camcorder that was designed for both amateurs and budding filmmakers seeking to capture high-quality footage without the complexities of more advanced systems. Released in the early 2000s, this model has a range of impressive features and characteristics that set it apart in its class.

One of the standout features of the GR-DVL166 is its ability to record in a 16:9 aspect ratio, which was a key innovation at the time. This widescreen feature allows users to capture a cinematic feel in their home videos, making it particularly appealing for those who wanted to create more engaging visual content. The camcorder also boasts a 1/6-inch 680,000 pixel CCD image sensor, which delivers quality video that remains vibrant and clear, even in various lighting conditions.

Another noteworthy characteristic of the GR-DVL166 is its 20x optical zoom lens. This impressive zoom capability allows users to get up close to the action without sacrificing image quality. In addition to the optical zoom, the camcorder also supports a digital zoom feature, extending the range even further. However, it's the optical zoom that truly enhances the overall shooting experience, making it versatile for different filming scenarios.

The GR-DVL166 incorporates a built-in USB 2.0 interface, making it easier for users to transfer their footage to a computer for editing or sharing. This connectivity option was ahead of its time and simplified the post-production process. It also features a FireWire (IEEE 1394) connection, facilitating faster data transfer rates, particularly beneficial for larger video files.

The ergonomics of the JVC GR-DVL166 are also commendable. Its lightweight design, combined with an easy-to-navigate interface and a 2.5-inch LCD screen, ensures that users can easily handle the device and monitor their shots with precision. The LCD is flip-out, providing flexibility for shooting from different angles.

Battery life is another positive aspect, with the camcorder providing ample recording time on a single charge, which is ideal for capturing events that may require extended filming periods.

Overall, the JVC GR-DVL166 remains a notable choice for entry-level videographers. With its combination of a wide aspect ratio, optical zoom capabilities, user-friendly features, and solid build quality, it provides an appealing option for those looking to capture their memories in a more cinematic fashion. As digital photography and videography continue to evolve, models like the GR-DVL166 highlight the technological advancements of their time and their lasting impact on consumer video recording.