JVC GR-DVL166 specifications 66 EN

Page 66

66 EN

Warning Indications

Indications

CHECK TAPE’S ERASE

PROTECTION TAB

HEAD CLEANING

REQUIRED USE

CLEANING CASSETTE

CONDENSATION

OPERATION PAUSED

PLEASE WAIT

TAPE!

TAPE END

DIFFERENT

FORMATTED TAPE

SET DATE/TIME!

LENS COVER

A. DUB ERROR!

A. DUB ERROR!

<CANNOT DUB

ON A LP RECORDED TAPE>

<CANNOT DUB

ON A 16BIT

RECORDING>

<CHECK TAPE’S ERASE

PROTECTION TAB>

INSERT ERROR!

INSERT ERROR!

<CANNOT EDIT

ON A LP RECORDED TAPE>

<CHECK TAPE’S ERASE

PROTECTION TAB>

E01, E02 or E06

UNIT IN SAFEGUARD

MODE REMOVE AND

REATTACH BATTERY

E03 or E04

UNIT IN SAFEGUARD

MODE EJECT AND

REINSERT TAPE

INDEX Indications (cont.)

Function

Displays the battery remaining power.

Remaining power level: high

Remaining power level: exhausted

As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically.

Appears when no tape is loaded.( pg. 12)

Appears when the erase protection tab is set to “SAVE” while the Power Switch is set to

AUTO

” or “

MANUAL

”.

( pg. 12)

Appears if dirt is detected on the heads during recording or playback.

( pg. 59)

Use an optional cleaning cassette.

Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.

Appears if a tape is not loaded when the Recording Start/Stop Button or SNAP-

SHOT Button is pressed while the Power Switch is set to “

AUTO

” or “

MANUAL

”.

 

 

 

Appears when the tape ends during recording or playback.

 

( pg. 52)

Appears if a tape in another format is loaded.

Appears when the date/time is not set.

( pg. 11)

Appears when the built-in clock battery runs out and the previously set date/time is erased. Consult your nearest JVC dealer for replacement.

Appears for 5 seconds after power is turned on if the lens cap is attached.

Appears if Audio Dubbing is attempted on a blank portion of a tape.

( pg. 48)

Appears if Audio Dubbing is attempted on a tape recorded in the LP mode.

( pg. 48)

Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio.

( pg. 48)

Appears if A. DUB (e) on the remote control is pressed when the erase protection

tab is set to “SAVE”.

( pg. 48)

Appears if Insert Editing is attempted on a blank portion of a tape.

( pg. 49)

Appears if Insert Editing is attempted on a tape recorded in the LP mode.

 

( pg. 49)

Appears if INSERT (w) on the remote control is pressed when the erase

protection tab is set to “SAVE”.

( pg. 49)

The error indications (E01, E02 or E06) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Remove the power supply (battery, etc.) and wait a few minutes for the indication to clear. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.

The error indications (E03 or E04) show what type of malfunction has occured. When an error indication appears, the camcorder turns off automatically. Eject the cassette once and re-insert it, then check if the indication clears. When it does, you can resume using the camcorder. If the indication remains, consult your nearest JVC dealer.

Image 66
Contents GR-DVL166 Dear Customer It is recommended that youBlue to N Neutral or Black Brown to L Live or Red Some DO’S and DON’TS on the Safe USE of Equipment Above ALLBefore recording an important scene How To Attach The Lens Cap How To Attach The Core Filter While pressing downGetting Started Battery pack Charging time PowerCharging the Battery Pack To Detach The Battery PackAbout Batteries Using the Battery PackUsing AC Power Approximate recording time10 EN Grip AdjustmentViewfinder Adjustment Shoulder Strap AttachmentMENU/BRIGHT Wheel Power Lamp Date/Time SettingsSet the Power Switch to Lock Button DisplayApproximate recording time Tape Recording mode 12 ENLoading/Unloading a Cassette Recording Mode Setting Set the tape recording mode depending on your preferenceMenu Screen 14 EN Basic Recording Remove the lens cap Set the Power Switch toTo Adjust The Brightness Of The Display To Stop Recording16 EN Operation ModePower Switch Position Journalistic ShootingZoom Slide the Power Zoom Lever towards TTo brighten the scene when natural lighting is too dim Zoom OutTime Code When a blank portion is recorded on a tape18 EN Proper recordingTo Control The Speaker Volume Normal PlaybackSpeaker 20 EN ConnectionsCamcorder If using a VCR . . . go to step If not . . . go to step Turn on the camcorder, the VCR and the TVBlank Search To cancel Blank Search midway22 EN PressAdvanced Features Night-Scope To Deactivate The Selected Mode24 EN To Deactivate Night-ScopeSpotlight ShutterSnow TwilightFade/Wipe Effects Power Switch Recording Start/Stop Button26 EN To Deactivate The Selected EffectFader And Wipe Menu Snapshot Snapshot Mode Selection28 EN Snapshot RecordingFocus detection zone While focusing on a nearer subjectTo obtain correct focus Subject30 EN Exposure ControlIris Lock Cloud White Balance AdjustmentManual White Balance Operation HalogenWIPE/FADER 32 ENFor Recording Menu Program AEMenu Screen Explanations Wide OFF Manual System Tele OFFMacro CinemaSystem Display Demo OFF CAM CancelReset Execute LCDFor Playback Menu Following procedure applies to all except Synchro Comp  pg36 EN Lock Button Recording Start/Stop ButtonSound Mode Playback SoundDisplay VCR 38 ENDubbing To a VCR Cvbs Video outDV cable To DV Lock ButtonCore filter Core filter To DV40 EN Lock holeKnob Remote sensor This function is unavailable with this camcorder 42 EN Remote sensor RM-V700U optional Zoom ButtonsNormal playback Press T SET REMOTE/VCR Code VCR Recording deckThis one 44 EN Connect the editing cable to the Remote Pause connectorConnect the editing cable to the R.A.EDIT Connector Make ConnectionsSelect Scenes Remote sensor RM-V700U optional46 EN Automatic Editing to VCREditing Menu Diagnosing VCR/CAMCORDER Timing Adjustment of VCR/CAMCORDER TimingFor More Accurate Editing ProgrammeAudio Dubbing Set 12BIT Mode to Sound 2 or MIX Menu Screen  pg48 EN To hear the dubbed sound during playbackInsert Editing Using PC connection cable Using DV cable50 EN References 52 EN Cold, charging may be incompleteSepia or Monotone mode is  pg Activated Used  pg Colour of SnapshotFind a white subject and compose 54 EN Turn the speaker volume down Or set the Power Switch to OFFIndicators Rear of the LCD monitor56 EN Remove Cassette holder Cleaning The CamcorderAfter Use BATT. Release Button58 EN Dirty heads can cause the following problems For safety, do notAvoid using the unit Do not leave the unit60 EN Audio output Power requirementVideo Output JlipIndex Controls, Connectors And Indicators 62 ENVideo Light Switch  pg OPEN/EJECT Switch  pgPower Switch DC Input Connector  pg Digital Video Connector64 EN Appears when the Power Switch is set to pg Appears when Night-Scope is engaged Index IndicationsVolume Displays the sound modeLCD Monitor/Viewfinder Indications During Playback 66 EN Darken The LCD Monitor Backlight CompensationChannels Left/Right Erase ProtectionVideo Light Pg , 35Unload a Tape White Balance

GR-DVL166 specifications

The JVC GR-DVL166 is a compact digital video camcorder that was designed for both amateurs and budding filmmakers seeking to capture high-quality footage without the complexities of more advanced systems. Released in the early 2000s, this model has a range of impressive features and characteristics that set it apart in its class.

One of the standout features of the GR-DVL166 is its ability to record in a 16:9 aspect ratio, which was a key innovation at the time. This widescreen feature allows users to capture a cinematic feel in their home videos, making it particularly appealing for those who wanted to create more engaging visual content. The camcorder also boasts a 1/6-inch 680,000 pixel CCD image sensor, which delivers quality video that remains vibrant and clear, even in various lighting conditions.

Another noteworthy characteristic of the GR-DVL166 is its 20x optical zoom lens. This impressive zoom capability allows users to get up close to the action without sacrificing image quality. In addition to the optical zoom, the camcorder also supports a digital zoom feature, extending the range even further. However, it's the optical zoom that truly enhances the overall shooting experience, making it versatile for different filming scenarios.

The GR-DVL166 incorporates a built-in USB 2.0 interface, making it easier for users to transfer their footage to a computer for editing or sharing. This connectivity option was ahead of its time and simplified the post-production process. It also features a FireWire (IEEE 1394) connection, facilitating faster data transfer rates, particularly beneficial for larger video files.

The ergonomics of the JVC GR-DVL166 are also commendable. Its lightweight design, combined with an easy-to-navigate interface and a 2.5-inch LCD screen, ensures that users can easily handle the device and monitor their shots with precision. The LCD is flip-out, providing flexibility for shooting from different angles.

Battery life is another positive aspect, with the camcorder providing ample recording time on a single charge, which is ideal for capturing events that may require extended filming periods.

Overall, the JVC GR-DVL166 remains a notable choice for entry-level videographers. With its combination of a wide aspect ratio, optical zoom capabilities, user-friendly features, and solid build quality, it provides an appealing option for those looking to capture their memories in a more cinematic fashion. As digital photography and videography continue to evolve, models like the GR-DVL166 highlight the technological advancements of their time and their lasting impact on consumer video recording.