JVC GR-DF430 Normal Playback, EN Video Playback, Shuttle Search, Blank Search, Still Playback

Press MENU. The Menu Screen appears.

Load a cassette. (
pg. 17)

22 EN VIDEO PLAYBACK

Normal Playback

VIDEO/	MENU			Power Switch
		4/9/
MEMORY*
			VOL. +/–		Lock Button

Shuttle Search

Allows high-speed search in either direction during video playback.

1)During playback, press 5 for forward search, or 3 for reverse search.

2)To resume normal playback, press 4/9.

●During playback, press and hold 5 or 3. The search continues as long as you hold the button. Once you release the button, normal playback resumes.

●A slight mosaic effect appears on the display during Shuttle Search. This is not a malfunction.

ATTENTION:

3 8/ 5 SET

1 Load a cassette. (
pg. 17)

Speaker

During Shuttle Search, parts of the picture may not be clearly visible, particularly on the left side of the screen.

2 Set the VIDEO/MEMORY Switch to “VIDEO”.*

3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

4 To start playback, press 4/9.

5 To stop playback, press 8.

●During Stop mode, press 3 to rewind, or 5

to fast-forward the tape. * GR-DF570/470 only

To control the speaker volume

Slide the Power Zoom Lever (VOL. +/–) towards “+” to turn up the volume, or towards “–”to turn down the volume.

Blank Search

Helps you find where you should start recording in the middle of a tape to avoid time code interruption. (
pg. 21)

1

2 Set the VIDEO/MEMORY Switch to “VIDEO”.*

3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

NOTES:

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV.

(
pg. 23)

●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off automatically. To turn on again, set the Power Switch to “OFF”, then to “PLAY”.

●When a cable is connected to the AV connector, the sound is not heard from the speaker.

Still Playback

Pauses during video playback.

1)Press 4/9 during playback.

2)To resume normal playback, press 4/9 again.

4

5 Press MENU to select “t”. The VIDEO Menu appears.

6 Press or to select “BLANK SRCH”, and press SET. The Sub Menu appears.

7 Press or to select “EXECUTE”, and press SET.

●The “BLANK SEARCH” indication appears and the camcorder automatically starts reverse or forward search, then stops at the spot which is about 3 seconds of tape before the beginning of the detected blank portion.

●To cancel Blank Search midway, press 8.

* GR-DF570/470 only

●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.