JVC GR-DF430 instruction manual Digital Dubbing, Editing EN, Equipped With a DV Connector

Set the camcorder’s Power Switch to “PLAY”. Set “REC MODE” to “SP” or “LP”. (
pg. 42)

EDITING EN 53

	Dubbing To Or From A Video Unit	To use this camcorder as a player
		1 Make sure all units are turned off.
	Equipped With A DV Connector
		2 Connect this camcorder to a video unit
	(Digital Dubbing)
		equipped with a DV input connector using a DV
		cable as shown in the illustration.
It is also possible to copy recorded scenes from		3 Start playback on the camcorder. ( pg. 22)
the camcorder onto another video unit equipped		4 At the point you want to start dubbing, start
with a DV connector. Since a digital signal is
sent, there is little if any image or sound		recording on the video unit. (Refer to the video
deterioration.		unit’s instruction manual.)
		5 To stop dubbing, stop recording on the video
		unit, then stop playback on this camcorder.

NOTES:

To DV IN/OUT

Core filter

DV cable (optional)

To DV IN/OUT

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. (
pg. 15)

●If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.

●Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again.

●If “Playback Zoom” (
pg. 27) or “Playback Special Effects” (
pg. 27) is attempted or SNAPSHOT is pressed during playback, only the original playback image recorded on the tape is output from the DV IN/OUT connector.

●When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable.

To use this camcorder as a recorder

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.

3

ADVANCED FEATURES

Video unit equipped with DV connector

4

5 Press the Recording Start/Stop Button to engage the Record-Pause mode.

●The “ DV IN ” indication appears on the screen.

6 Start playback on the player.

7 At the point you want to start dubbing, press the Recording Start/Stop Button to start

dubbing. The indication rotates.

8 Press the Recording Start/Stop Button again

to stop dubbing. The indication stops rotating.

9 Press 8 to return to the normal playback mode.

CONTINUED ON NEXT PAGE