JVC GR-DF430 If using a VCR , go to step, To choose whether or not the following

	VIDEO PLAYBACK	EN 23
NOTES:	A Black to S-VIDEO IN (Connect when your TV/
● Before starting Blank Search, if the current	VCR has S-VIDEO IN and A/V input
	connectors. In this case, it is not necessary to
position is at a blank portion, the camcorder
searches in the reverse direction. If the current	connect the yellow video cable.)
position is at a recorded portion, the camcorder	B Yellow to VIDEO IN (Connect when your TV/
searches in the forward direction.	VCR has only A/V input connectors.)
● If the beginning or end of the tape is reached	C Red to AUDIO R IN*
during Blank Search, the camcorder stops	D White to AUDIO L IN*
automatically.	* Not required for watching still images only.

●A blank portion which is shorter than 5 seconds of

	tape may not be detected.		NOTE:
● The detected blank portion may be located			The S-Video cable is optional. Be sure to use the
	between recorded scenes. Before you start		YTU94146A S-Video cable. Consult the JVC
	recording, make sure there is no recorded scene		Service Center described on the sheet included
	after the blank portion.		in the package for details on its availability.
			Make sure to connect the end with a core filter
		Connections To A TV Or VCR	to the camcorder. The core filter reduces
			interference.

	Open the cover.			1 Make sure all units are turned off.
				2 Connect the camcorder to a TV or VCR as
To S connector
				shown in the illustration.
				If using a VCR, go to step 3.
				If not, go to step 4.
				3 Connect the VCR output to the TV input,
		To AV connector		referring to your VCR’s instruction manual.
				4 Turn on the camcorder, the VCR and the TV.
				5 Set the VCR to its AUX input mode, and set
S cable			AV cable	the TV to its VIDEO mode.
				6 Start playback on the camcorder. ( pg. 22)
(optional)			(provided)
				To choose whether or not the following
				displays appear on the connected TV
				● Date/time
1	2	3	4	Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
				( pg. 37, 42)
				Or, press DISPLAY on the remote control to turn
				on/off the date indication.
TV				● Time code
				Set “TIME CODE” to “ON” or “OFF”.
				( pg. 37, 42)
			VCR	● Indications other than date/time and time code
				Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
				( pg. 37, 42)

VIDEO RECORDING & PLAYBACK

CONTINUED ON NEXT PAGE