JVC GR-DVL310A, GR-DVL210A, GR-DVL210EA, GR-DVL313A Dubbing From a VCR, EN53, VCR Playback deck

Page 53

Power Switch

Connector cover**

To AV

To S

Audio/Video cable [mini-plug to RCA plug] (provided)

S-Video cable (optional)

To AUDIO, VIDEO* and S-VIDEO OUT connectors

VCR (Playback deck)

TV

*Connect when an S-Video cable is not used.

**When connecting the cables, open this cover.

EN53

Dubbing From A VCR

[To use this camcorder as a recorder: GR-DVL910A/DVL510A/DVL910EA/ DVL510EA only]

1 Make sure all units are turned off, then connect the camcorder and the VCR as shown in the illustration. Also refer to pg. 22 and 23.

2 Set “SOUND MODE” to “12 BIT” or “16 BIT” and “REC MODE” to “SP” or “LP” in the Menu Screen depending on your preference ( pg. 50).

3 Set the VIDEO/DSC Switch to “VIDEO”, then set the

camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

4 Set “S/AV INPUT” to “ON” in the Menu Screen to engage the analogue input mode ( pg. 50).

5 Press the Recording Start/Stop Button on the camcorder to engage the Record-Pause mode.

“AV. IN ” appears on the screen.

6 Engage the VCR’s Play mode, then engage the Still Playback mode when you have found a spot just before the edit-in point.

7 Press the Recording Start/Stop Button on the

camcorder to engage the Record mode. rotates on the screen. Engage the VCR’s Play mode.

8 To stop dubbing, press the Recording Star/Stop Button

on the camcorder so that stops rotating, then engage the VCR’s Stop mode.

9 Repeat steps 6 through 8 for additional editing.

10 Set “S/AV INPUT” back to “OFF” in the Menu Screen to disengage the analogue input mode ( pg. 50).

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 9).

●Analogue signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Instructions It is recommended that you Dear CustomerEN3 Make sure you only use cassettes with the Mini DV mark Before recording an important scenePower Cord AC Adapter Remote Control UnitAP-V10A RM-V717U BN-V408U GR-DVL910A/DVL510A UnitRelease the stoppers on both ends of the Core Filter How To Attach The Core FilterGetting Started ContentsCharging the Battery Pack PowerTo Detach The Battery Pack Slide BAT. Release and pull out the battery packUsing AC Power Using the Battery PackAbout Batteries Approximate recording timeViewfinder Adjustment Grip Adjustment10 EN Shoulder Strap AttachmentEN11 Date/Time SettingsLoading/Unloading a Cassette 12 ENEN13 Recording Mode SettingSet the tape recording mode depending on your preference Loading a Memory Card Picture Quality Mode SettingTo Unload a Memory Card GR-DVL910A/DVL510A/DVL910EA/DVL510EA onlyVideo Recording Playback Video Recording & Playback16 EN To Adjust The Brightness Of The DisplayVideo Recording Basic RecordingEN17 Operation ModeJournalistic Shooting SELF-RECORDING18 EN Slide the Power Zoom Lever towards TZoom Zoom OutTo brighten the scene when natural lighting is too dim Feature Video LightEN19 Set Light OFF/AUTO/ON as required20 EN When a blank portion is recorded on a tapeTime Code Proper recordingVideo Playback To Control The Speaker VolumeNormal Playback EN21Video Playback 22 ENEN23 If using a VCR . . . go to step If not . . . go to step24 EN To cancel Blank Search midwayBlank Search Press Blank SearchDigital Still Camera C. Recording Playback 26 EN Snapshot Mode SelectionBasic Shooting Snapshot Snapshot RecordingWhen you do not want to hear the shutter sound, set When unwanted still images are stored in the memoryEN27 To Delete Unwanted Still ImagesAuto Playback 28 ENYou can run through all the images stored in memory AutomaticallyEN29 Index ScreenIndex Playback Jump Playback 30 ENEN31 Protecting ImagesTo Protect AN Image To Remove ProtectionDeleting Images 32 ENTo Delete the Displayed Image To Select AN Image by BrowsingBefore doing the following, perform steps 1 through 3 on pg EN33To Delete ALL Images To Print ALL Still Images ONE Print for Each To Reset The Setting34 EN To Print by Selecting Still Images and NO. of Prints To Reset The No. Of PrintsEN35 You can initialise a memory card anytime 36 ENInitialising a Memory Card For Recording Advanced FeaturesFor Recording 38 ENNight-Scope Programme AE With Special EffectsGives recorded scenes a strobe effect EN39Your recording looks like a series of consecutive snapshots Slow Slow ShutterFade/Wipe Effects 40 ENFADE/WIPE Selection Picture Wipe or Dissolve SelectionMenu Effect EN41Fader And Wipe Menu Snapshot For Video Recording 42 ENFeature Manual Focus Feature Auto FocusEN43 To obtain correct focusIris Lock 44 ENExposure Control Manual White Balance Operation White Balance AdjustmentEN45 To Return To Automatic White BalanceFor Recording Menu EN Using Menus for Detailed AdjustmentIf you have selected WIPE/FADER Program AE or W. Balance See pgMenu Screen Explanations EN47Activates the shutter sound effect  pg Factory setting isRecording. Also to activate the shutter sound effect  pg EN49 For Playback Menu Following procedure applies to all except Synchro Comp  pgPlayback Sound DisplayEN51 Dubbing 52 ENDubbing To a VCR To use this camcorder as a playerVCR Playback deck Dubbing From a VCREN53 Dubbing 54 ENEN55 Dubbing Images Stored In a Memory Card To a TapeImages can be dubbed from a tape to a memory card 56 ENDubbing Images Recorded On a Tape To a Memory Card EN57 Using the Remote Control UnitInstalling The Batteries Unit 58 ENFeature Frame-By-Frame Playback Feature Slow-Motion PlaybackFeature Playback Special Effects EN5960 EN Feature Playback ZoomTo magnify the recorded image up to Any time during playbackVCR Recording deck EN61SET REMOTE/VCR Code Make Connections JVC VCR equipped with a remote pause connectorAlso refer to pg VCR other than aboveEN63 Automatic Editing to VCR 64 ENFor More Accurate Editing Adjustment of VCR/CAMCORDER TimingEN65 Diagnosing VCR/CAMCORDER Timing66 EN Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgAudio Dubbing To hear the dubbed sound during playbackEN67 Insert EditingUsing DV cable Using USB or PC connection cableAUsing USB or PC connection cable Using DV cableEN69 Connection To a Video Unit Equipped With a DV ConnectorReferences 70 ENCassette holder cannot be opened unless a power supply is When you use the LCD monitor outdoors in direct sunlight,EN71  pgCorrective Action 72 ENEN73 74 EN TroubleshootingEN75 76 EN After Use Cleaning The Camcorder User MaintenanceTurn off the camcorder Press Push Here to close the cassette holder5 6 78 ENEN79 Standard in order of quality 80 ENAppears and blinks during shooting.  pg EN81 Level indicator moves Displays the date Displays the sound modeLCD Monitor/Viewfinder Indications During Video Playback Bright Displays the brightness of the LCDIndications Function EN83Possible Switch is set toAppears, the memory card is corrupted Protected SD Memory Card is loaded E01 E06EN85 To prevent damage and prolong service life Do not use near flammable or explosive materials To avoid hazards86 EN To protect the unit, do not EN87About moisture condensation Serious malfunctioningTerms 88 ENTime Code  pg , 49, 50 EN89For Digital Video Camera 90 ENFor General EN91 For ConnectorsS/EA 0201HOV*UN*SN

GR-DVL210EA, GR-DVL910EA, GR-DVL313A, GR-DVL510A, GR-DVL510EA specifications

The JVC GR-DVL210A, GR-DVL910A, GR-DVL450A, GR-DVL310A, and GR-DVL510EA represent a significant leap in the evolution of digital camcorders. These models are renowned for their user-friendly features, advanced technologies, and versatile characteristics, making them popular choices for both amateur videographers and seasoned professionals.

The JVC GR-DVL210A is a compact and lightweight digital camcorder that boasts a 1/6 inch CCD sensor, producing high-quality video recordings at 520 lines of resolution. Equipped with a 10x optical zoom and 800x digital zoom, this model allows users to capture detailed footage from a distance, while the image stabilization technology reduces blurriness caused by hand movement. Additionally, the GR-DVL210A features a 2.5-inch LCD screen that provides a clear view of the subject, enhancing the shooting experience.

Moving up the range, the GR-DVL910A offers enhanced features including a 1/4 inch CCD sensor, enabling improved light sensitivity for better performance in low-light conditions. This model is equipped with a 16:9 aspect ratio capability, making it suitable for capturing widescreen videos. The GR-DVL910A also includes advanced digital effects, allowing users to add creative touches to their recordings, along with a built-in digital still camera that captures high-resolution images.

The GR-DVL450A strikes a balance between performance and affordability. This model enhances image quality with a 1.5-inch LCD screen and improved 3D noise reduction technology. It comes with a powerful 20x optical zoom and 800x digital zoom, solidifying its place as a versatile option for capturing dynamic events.

The GR-DVL310A is notable for its ease of use, making it an ideal choice for beginners. Featuring automatic settings, this camcorder simplifies the filming process, allowing users to focus on creativity rather than getting bogged down by technicalities. Its digital effects and transition features make it perfect for those looking to enhance their video projects.

Finally, the GR-DVL510EA combines advanced features with an user-friendly interface. It includes a larger 3.5-inch LCD screen and multiple connectivity options, including USB 2.0 for easy file transfers. Capable of recording in various formats, the GR-DVL510EA appeals to a broad audience seeking a versatile camcorder.

In summary, the JVC GR-DVL series camcorders stand out for their technology and features, providing users with flexible filming options, clear video quality, and user-friendly designs, catering to a wide range of videography needs.
Top Page Image Contents