JVC GR-DVL910A Recording. Also to activate the shutter sound effect  pg, Factory setting is

Page 48

48 EN USING MENUS FOR DETAILED ADJUSTMENT (cont.)

Menu Screen Explanations (cont.)

MANUAL

SYSTEM

TELE

OFF

Usually the distance to a subject where the lens is in focus depends on the

MACRO

 

zoom magnification. Unless there is a distance more than 1m to the subject,

 

 

 

the lens is out of focus at the maximum telephoto setting. When set to “ON”,

 

 

ON

 

 

you can shoot a subject as large as possible at a distance of approx. 60 cm.

 

 

 

•Depending on the zoom position, the lens may go out of focus.

 

 

 

 

WIDE

OFF

Records with no change in the screen ratio. For playback on a TV with a

MODE

 

normal screen ratio.

 

 

 

CINEMA

Inserts black bands at the top and bottom of the screen. During playback on

 

 

 

wide-screen TVs, the black bands at the top and bottom of the screen are cut

 

 

 

and the screen ratio becomes 16:9.

appears. When using this mode, refer

 

 

 

to your wide-screen TV’s instruction manual. During playback/recording on

 

 

 

4:3 TVs/LCD monitor/viewfinder, black bands are inserted at the top and

 

 

 

bottom of the screen and the image appears like a letterboxed 16:9 movie.

The “CINEMA” mode is effective only when the VIDEO/DSC Switch is set to “VIDEO” (GR-DVL910A/DVL510A/DVL910EA/DVL510EA only).

SQUEEZE For playback on TVs with an aspect ratio of 16:9. Naturally expands the

 

 

image to fit the screen without distortion.

 

appears. When using this

 

 

 

 

 

mode, refer to your wide-screen TV’s instruction manual. During playback/

 

 

recording on 4:3 TVs/LCD monitor/viewfinder, the image is elongated

 

 

vertically.

 

 

The “SQUEEZE” mode is effective only when the VIDEO/DSC Switch is set to “VIDEO” (GR-DVL910A/DVL510A/DVL910EA/DVL510EA only).

WIND

OFF

Disengages the function which cuts down on noise created by wind.

CUT

ON

Helps cut down on noise created by wind. “

” appears. The quality of the

 

 

 

sound will change. This is normal.

 

BEEP

OFF

Even though not heard while shooting, shutter sound is recorded on the tape.

 

 

 

 

BEEP

The beep sounds when the power is turned on or off, and at the beginning and end

 

 

of recording. Also to activate the shutter sound effect ( pg. 26, 42).

 

 

 

 

MELODY

Instead of a beep, a melody sounds when any operation is performed. It also

 

 

activates the shutter sound effect ( pg. 26, 42).

TALLY

OFF

The tally lamp remains off at all times.

 

 

 

 

 

ON

The tally lamp comes on to signal the start of recording.

ID NUMBER

This number is necessary when connecting the camcorder to a device such as

(GR-DVL450A/DVL313A/

a computer using the J terminal (JLIP). The numbers range from 01 to 99.

DVL310A/DVL210A/

Factory setting is 06.

 

DVL210EA only)

 

 

: Factory-preset

NOTES:

The “ MANUAL” settings are effective only when the Power Switch is set to “ ”.

SYSTEM” functions which are set when the Power Switch is set to “ ” are also applied when the Power Switch is set to “ ” ( pg. 50).

Image 48
Contents Instructions Dear Customer It is recommended that youEN3 Before recording an important scene Make sure you only use cassettes with the Mini DV markAC Adapter Remote Control Unit Power CordAP-V10A RM-V717U BN-V408U GR-DVL910A/DVL510A UnitHow To Attach The Core Filter Release the stoppers on both ends of the Core FilterContents Getting StartedPower Charging the Battery PackTo Detach The Battery Pack Slide BAT. Release and pull out the battery packUsing the Battery Pack Using AC PowerAbout Batteries Approximate recording timeGrip Adjustment Viewfinder Adjustment10 EN Shoulder Strap AttachmentDate/Time Settings EN1112 EN Loading/Unloading a CassetteRecording Mode Setting Set the tape recording mode depending on your preferenceEN13 Picture Quality Mode Setting Loading a Memory CardTo Unload a Memory Card GR-DVL910A/DVL510A/DVL910EA/DVL510EA onlyVideo Recording & Playback Video Recording PlaybackTo Adjust The Brightness Of The Display 16 ENVideo Recording Basic RecordingOperation Mode EN17Journalistic Shooting SELF-RECORDINGSlide the Power Zoom Lever towards T 18 ENZoom Zoom OutFeature Video Light To brighten the scene when natural lighting is too dimEN19 Set Light OFF/AUTO/ON as requiredWhen a blank portion is recorded on a tape 20 ENTime Code Proper recordingTo Control The Speaker Volume Video PlaybackNormal Playback EN2122 EN Video PlaybackIf using a VCR . . . go to step If not . . . go to step EN23To cancel Blank Search midway 24 ENBlank Search Press Blank SearchDigital Still Camera C. Recording Playback Snapshot Mode Selection 26 ENBasic Shooting Snapshot Snapshot RecordingWhen unwanted still images are stored in the memory When you do not want to hear the shutter sound, setEN27 To Delete Unwanted Still Images28 EN Auto PlaybackYou can run through all the images stored in memory AutomaticallyIndex Screen Index PlaybackEN29 30 EN Jump PlaybackProtecting Images EN31To Protect AN Image To Remove Protection32 EN Deleting ImagesTo Delete the Displayed Image To Select AN Image by BrowsingEN33 To Delete ALL ImagesBefore doing the following, perform steps 1 through 3 on pg To Reset The Setting 34 ENTo Print ALL Still Images ONE Print for Each To Reset The No. Of Prints EN35To Print by Selecting Still Images and NO. of Prints 36 EN Initialising a Memory CardYou can initialise a memory card anytime Advanced Features For Recording38 EN For RecordingNight-Scope Programme AE With Special EffectsEN39 Gives recorded scenes a strobe effectYour recording looks like a series of consecutive snapshots Slow Slow Shutter40 EN Fade/Wipe EffectsFADE/WIPE Selection Picture Wipe or Dissolve SelectionEN41 Fader And Wipe MenuMenu Effect 42 EN Snapshot For Video RecordingFeature Auto Focus Feature Manual FocusEN43 To obtain correct focus44 EN Exposure ControlIris Lock White Balance Adjustment Manual White Balance OperationEN45 To Return To Automatic White BalanceEN Using Menus for Detailed Adjustment For Recording MenuIf you have selected WIPE/FADER Program AE or W. Balance See pgEN47 Menu Screen ExplanationsFactory setting is Recording. Also to activate the shutter sound effect  pgActivates the shutter sound effect  pg EN49 Following procedure applies to all except Synchro Comp  pg For Playback MenuDisplay EN51Playback Sound 52 EN DubbingDubbing To a VCR To use this camcorder as a playerDubbing From a VCR EN53VCR Playback deck 54 EN DubbingDubbing Images Stored In a Memory Card To a Tape EN5556 EN Dubbing Images Recorded On a Tape To a Memory CardImages can be dubbed from a tape to a memory card Using the Remote Control Unit Installing The BatteriesEN57 58 EN UnitFeature Slow-Motion Playback Feature Frame-By-Frame PlaybackFeature Playback Special Effects EN59Feature Playback Zoom 60 ENTo magnify the recorded image up to Any time during playbackEN61 SET REMOTE/VCR CodeVCR Recording deck JVC VCR equipped with a remote pause connector Make ConnectionsAlso refer to pg VCR other than aboveEN63 64 EN Automatic Editing to VCRAdjustment of VCR/CAMCORDER Timing For More Accurate EditingEN65 Diagnosing VCR/CAMCORDER TimingSet 12BIT Mode to Sound 2 or MIX Menu Screen  pg 66 ENAudio Dubbing To hear the dubbed sound during playbackInsert Editing EN67Using USB or PC connection cable Using DV cableAUsing USB or PC connection cable Using DV cableConnection To a Video Unit Equipped With a DV Connector EN6970 EN ReferencesWhen you use the LCD monitor outdoors in direct sunlight, Cassette holder cannot be opened unless a power supply isEN71  pg72 EN Corrective ActionEN73 Troubleshooting 74 ENEN75 76 EN User Maintenance After Use Cleaning The CamcorderTurn off the camcorder Press Push Here to close the cassette holder78 EN 5 6EN79 80 EN Appears and blinks during shooting.  pgStandard in order of quality EN81 Displays the sound mode Level indicator moves Displays the dateLCD Monitor/Viewfinder Indications During Video Playback Bright Displays the brightness of the LCDEN83 Indications FunctionSwitch is set to PossibleAppears, the memory card is corrupted Protected SD Memory Card is loaded E01 E06To prevent damage and prolong service life EN85 Do not use near flammable or explosive materials To avoid hazards86 EN EN87 To protect the unit, do notAbout moisture condensation Serious malfunctioning88 EN TermsEN89 Time Code  pg , 49, 5090 EN For GeneralFor Digital Video Camera For Connectors EN91S/EA 0201HOV*UN*SN

GR-DVL210EA, GR-DVL910EA, GR-DVL313A, GR-DVL510A, GR-DVL510EA specifications

The JVC GR-DVL210A, GR-DVL910A, GR-DVL450A, GR-DVL310A, and GR-DVL510EA represent a significant leap in the evolution of digital camcorders. These models are renowned for their user-friendly features, advanced technologies, and versatile characteristics, making them popular choices for both amateur videographers and seasoned professionals.

The JVC GR-DVL210A is a compact and lightweight digital camcorder that boasts a 1/6 inch CCD sensor, producing high-quality video recordings at 520 lines of resolution. Equipped with a 10x optical zoom and 800x digital zoom, this model allows users to capture detailed footage from a distance, while the image stabilization technology reduces blurriness caused by hand movement. Additionally, the GR-DVL210A features a 2.5-inch LCD screen that provides a clear view of the subject, enhancing the shooting experience.

Moving up the range, the GR-DVL910A offers enhanced features including a 1/4 inch CCD sensor, enabling improved light sensitivity for better performance in low-light conditions. This model is equipped with a 16:9 aspect ratio capability, making it suitable for capturing widescreen videos. The GR-DVL910A also includes advanced digital effects, allowing users to add creative touches to their recordings, along with a built-in digital still camera that captures high-resolution images.

The GR-DVL450A strikes a balance between performance and affordability. This model enhances image quality with a 1.5-inch LCD screen and improved 3D noise reduction technology. It comes with a powerful 20x optical zoom and 800x digital zoom, solidifying its place as a versatile option for capturing dynamic events.

The GR-DVL310A is notable for its ease of use, making it an ideal choice for beginners. Featuring automatic settings, this camcorder simplifies the filming process, allowing users to focus on creativity rather than getting bogged down by technicalities. Its digital effects and transition features make it perfect for those looking to enhance their video projects.

Finally, the GR-DVL510EA combines advanced features with an user-friendly interface. It includes a larger 3.5-inch LCD screen and multiple connectivity options, including USB 2.0 for easy file transfers. Capable of recording in various formats, the GR-DVL510EA appeals to a broad audience seeking a versatile camcorder.

In summary, the JVC GR-DVL series camcorders stand out for their technology and features, providing users with flexible filming options, clear video quality, and user-friendly designs, catering to a wide range of videography needs.