40 EN, Snapshot For Tape Recording | JVC GR-DVL520, GR-DVL720

40 EN

FOR RECORDING (cont.)

SNAPSHOT Button

Power Switch

Snapshot (For Tape Recording)

This feature lets you record still images that look like photographs onto a tape.

SNAPSHOT MODE SELECTION

1 Set the VIDEO/MEMORY Switch to “VIDEO” (GR- DVL720/DVL520 only), then set the Power Switch to

“	” while pressing down the Lock Button
MANUAL

located on the switch.

Lock Button

Display

VIDEO/MEMORY Switch (GR-DVL720/DVL520 only; open the LCD monitor to access this switch.)

Menu Screen

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.

3 Rotate the MENU/BRIGHT wheel to select “ CAMERA”. Press it and the CAMERA Menu appears.

4 Rotate the MENU/BRIGHT wheel to select “SNAP MODE”, then press it.

5 Rotate the MENU/BRIGHT wheel to select the desired Snapshot mode, then press it.

Rotate the MENU/BRIGHT wheel to select

“ RETURN” and press it twice. The Menu Screen closes.

SNAPSHOT RECORDING

1 Press SNAPSHOT. “PHOTO” appears while the snapshot is being taken.

SNAP MODE – FUL L

P I N–UP

FRAME

GR-DVL720/DVL520 only

FULL Snapshot mode with no frame

PIN-UP

Pin-Up mode

FRAME Snapshot mode with frame

There is the sound effect of a shutter closing.

If you press during Record-Standby . . .

..... “PHOTO” appears and a still image will be recorded

for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

..... “PHOTO” appears and a still image will be recorded

	for approx. 6 seconds, then the normal recording
	resumes.		” or
• Regardless of the Power Switch position (“
“		AUTO
		”), Snapshot recording takes place using the
MANUAL

selected Snapshot mode.

Motor Drive Mode

Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second)

NOTES:

●To remove the shutter sound, “BEEP” on pg. 44, 46.

●If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

●If Program AE with special effects ( pg. 36) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●If SNAPSHOT is pressed when “DIS” is set to “ON” ( pg. 45), the Stabilizer will be disabled.

●The Motor Drive mode is disabled when “REC

SELECT” is set to “		/		” in the Menu
Screen ( pg. 47).

●During tape playback as well, all snapshot modes are

available when “

COPY” is set to “OFF” in

the Menu Screen ( pg. 48). However, the shutter sound is not heard.

●During Snapshot recording, the image displayed in the viewfinder may be partially missing. However, there is no effect in the recorded image.

●When a cable is connected to the AV connector, the shutter sound is not heard from the speaker, however it

is recorded onto the tape.