JVC GR-DVL520, GR-DVL720 instruction manual 70 EN

70 EN		TROUBLESHOOTING (cont.)
SYMPTOM	POSSIBLE CAUSES		CORRECTIVE ACTION
% White Balance cannot be	• The Sepia or Monotone mode is		• Turn off Sepia or Monotone before
activated.	activated.		setting White Balance ( pg. 37,
			43).
^ When shooting a subject	• This is a result of exceedingly high
illuminated by bright light,	contrast, and is not a malfunction.		————
vertical lines appear.
& When the screen is under	• This is not a malfunction.
direct sunlight during
shooting, the screen			————
becomes red or black for an
instant.
* During recording, the date/	• “DATE/TIME” is set to “OFF” in the		• Set “DATE/TIME” to “ON” in the
time does not appear.	Menu Screen.		Menu Screen ( pg. 47).
( Files stored on the memory	• Files stored on the memory card		• Remove protection from the files
card cannot be deleted.	are protected.		stored on the memory card and
			delete them ( pg. 30, 31).
) Time code does not appear.	• “TIME CODE” is set to “OFF” in the		• Set “TIME CODE” to “ON” in the
	Menu Screen.		Menu Screen ( pg. 47, 48).
q Images on the LCD monitor	• In places subject to low tempera-		• Adjust the brightness and angle of
appear dark or whitish.	ture, images become dark due to		the LCD monitor ( pg. 16, 17).
	the characteristics of the LCD
	monitor. When this happens, the
	displayed colors differ from those
	that are actually recorded. This is
	not a defect of the camcorder.
	• When the LCD monitor's fluores-
	cent light reaches the end of its
	service life, images on the LCD
	monitor become dark. Consult your
	nearest JVC dealer.