JVC GR-DVL720, GR-DVL520 instruction manual Quality, Image Size, REC Select

EN 47

DEMO	OFF
MODE	ON

SYSTEM

CAM	CANCEL
RESET	EXECUTE
ON	LCD
SCREEN
	LCD/TV
DATE/	OFF
TIME
	AUTO
DISPLAY
	ON
TIME	OFF
CODE
	ON

CLOCK ADJ.

(GR-DVL720/DVL520 only)

	QUALITY
	IMAGE SIZE
DSC	REC
	SELECT
			/
		: Factory-preset

Automatic demonstration will not take place.

Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate.

Demonstration starts in the following cases:

•When the Menu Screen is closed after “DEMO MODE” is turned “ON”.

•With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes

after the Power Switch is set to “	” or “	” .
AUTO	MANUAL

Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.

NOTES:

●If a tape is in the camcorder, the demonstration cannot be turned on.

●“DEMO MODE” remains “ON” even if the camcorder power is turned off.

●If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”.

Does not reset all settings to the factory-preset.

Resets all settings to the factory-preset.

Keeps the camcorder’s display (except the date, time and time code) from appearing on the connected TV screen.

Makes the camcorder’s display appear on screen when the camcorder is connected to a TV.

The date/time does not appear.

Displays the date/time for approx. 5 seconds in the following cases:

• When the Power Switch is set from “OFF” to “	” or “	”.
AUTO	MANUAL

•When tape playback starts. The camcorder displays the date/time when scenes are recorded.

•When the date is changed during tape playback.

The date/time is always displayed.

Time code is not displayed.

Time code is displayed on the camcorder and on the connected TV. Frame numbers are not displayed during recording.

Allows you to set the current date and time ( pg. 11).

Refer to “Picture Quality/Image Size Setting”( pg. 14).

When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded only onto the tape.

When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded not only onto the tape but also on the memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in the CAMERA Menu is also applicable to memory card recording.

NOTES:

● “	SYSTEM” and “	DISPLAY” functions which are set when the Power Switch is set to “	” are also applied
		MANUAL

when the Power Switch is set to “PLAY”( pg. 48). “CLOCK ADJ.” only appears when the Power Switch is set to

MANUAL	”.
“
● Settings made in the “		DISPLAY” Menu remain effective even when the Power Switch is set to “		”. However,
			AUTO
		MANUAL	”.
the menu settings can be changed only when the Power Switch is set to “

●The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control (provided with GR-DVL720) ( pg. 23, 50, 59).