JVC GR-DVM5 specifications Indoor Use, Using The Battery Holder

10ENGETTINGSTARTED(Cont.)

Indoor Use

When using the camcorder indoors, you can use the AC Charger Station (provided) instead of a battery.

		Power lamp
Slide down the		When power is	To AC outlet
		supplied, the
open switch.		power lamp lights.
Remove.
	To DC		Power cord
	OUT
DC cord	jack
Coupler		AC Charger Station
Core filter		AA-V60EK or AA-V60EA

1

2

CONNECT DC CORD TO CAMCORDER

Insert the coupler of the provided DC cord into the camcorder.

CONNECT DC CORD TO AC CHARGER STATION

Connect the DC cord to the AC Charger Station’s DC OUT jack.

3 SUPPLY POWER TO AC CHARGER STATION

Plug the AC Charger Station’s power cord into an AC outlet.

NOTE:

Since the AC Charger Station processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

Using The Battery Holder

For extended use, prepare the Battery Holder (CU-V615U), which can be loaded with one battery pack. This Battery Holder can be used together with the battery installed in the camcorder.

Camcorder connector

Nub

Mark

Camcorder lock lever (with release button)

Battery lock switch

Battery

INSERT CHARGED BATTERY
1 To insert a battery pack, slide the battery lock
switch to the release position and insert the
battery	end first. To prevent the battery pack

from falling out, be sure to slide the battery lock switch to the lock position.

2 ATTACH TO CAMCORDER

Insert the Battery Holder’s nub into the mounting socket on the bottom of the camcorder and slide the camcorder lock lever to the lock position.

•To detach the camcorder, press the release button on the lock lever and slide the lock lever to the release position. Then slide the battery lock switch to the release position.

NOTES:

●When the battery remaining power indicator appears

as , that means the battery power is close to nil. When the battery power is exhausted, power turns off automatically.

●Each time you start shooting, the camcorder chooses the battery pack that has more remaining power, and uses that as the power supply. That means both battery packs will be exhausted at roughly the same time.