JVC GR-DVM5 FADE/WIPE Effects, Accessmenu Manual Mode Item, Access FADER/WIPE Menu, Select Effect

EN35

FADE/WIPE Effects

IMPORTANT:

If certain P.AE/Effects (☞ pg. 42) are activated, some Fade/Wipe Effects cannot be used. If you select a Fade/ Wipe Effect that is unusable in the current situation, the indication blinks.

Use these to spice up the transition from one scene to the next. You can also vary transitions from scene to scene. Refer to pages 35 – 40 for Fade/Wipe effects and techniques.

Select any one effect from the Fader/Wipe Menu.

FOCUS	AUTO
EXPOSURE	AUTO
W. BALANCE	AUTO
4FADER	OFF
/ WIPE
P. AE	OFF
/ EFFECT

Display

FADER / WIPE
	P	WIPE – SHUTTER
	? R	RANDOM
SEL. 4		OFF
	WH	FADER – WHITE
	BK	FADER – BLACK
		FADER – MOSAIC
	B W	FADER – B.W

MANUAL

WH

PAUSE

RETURN

Manual Mode Item Menu Fader/Wipe Menu

Select Dial

5S
M	OFF
A

YALP

Lock button

START/STOP button

Power Dial

SELECT OPERATION MODE
1 First turn the Power Dial to “	M	” while pressing

down the lock button located on the dial, make sure the LCD monitor is open fully or the viewfinder is pulled out.

2 ACCESSMENU MANUAL MODE ITEM

Press the Select Dial.

3 ACCESS FADER/WIPE MENU

Move the pointer and highlight bar to “FADER/ WIPE” by rotating the Select Dial and then press it. The Fader/Wipe Menu appears.

4 SELECT EFFECT

Move the pointer and highlight bar to the desired effect by rotating the Select Dial, then press it.

•The Fader/Wipe Menu disappears and the effect is reserved. The indicator representing the selected effect appears.

5 START RECORDING

Press START/STOP to start recording and activate fade- or wipe- in

OR . . .

END RECORDING

Press START/STOP to end recording and activate fade- or wipe- out.

6 TO CANCEL FADE/WIPE EFFECTS

In step 4, move the pointer and highlight bar to “OFF”. Press the Select Dial.