JVC GR-DVM5 specifications Random Assemble Editing, Execute FADE/WIPE in if Necessary

EN63

Random Assemble Editing

Using the remote control, you can use P.AE/Effects and make an original edited tape.

To EDIT connector
	Editing cable		To remote
	Core (provided)		pause		DISPLAY
	filter		connecter	T	W
					PLAY
	VIDEO/				FADE/WIPE
	AUDIO cable
					R.A. EDIT
Red to AUDIO R	(provided)	White to AUDIO L
					ON/OFF
White to AUDIO L	Core	Red to AUDIO R
					VCR
Yellow to VIDEO	filter	Yellow to VIDEO
					(Recording deck)

To S-VIDEO OUT connector	S-VIDEO cable
Core	(provided)	VIDEO OUT
filter
		select switch
Remote sensor		(Y/C or CVBS)
Source tape
(Camcorder)
New tape
(VCR)

Cable adapter (provided only with U.K. models) If your VCR has the

21-pin AV input connector (SCART), use the provided cable adapter.

1 MAKE CONNECTIONS

Make sure that the playback picture and sound are available on the connected TV (☞ pg. 56, 57).

•Connections should be made while the power is off. Making connections with the power on can lead to electrical shock or malfunctions.

2 START SOURCE PLAYBACK First turn the Power Dial to “PLAY” while pressing down the lock button located on the dial. Press PLAY and then press R.A. EDIT ON/ OFF on the remote control. Make sure to point the remote control at the camcorder’s remote sensor.

•The Random Assemble Editing Menu appears on the TV screen or the LCD monitor.

3 EXECUTE FADE/WIPE IN (IF NECESSARY)

Press FADE/WIPE on the remote control.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•You can’t use a Picture Wipe/Dissolve at the beginning of Program 1.

NOTES:

●When using a JVC VCR with a remote pause terminal, connect the EDIT connector on the AC Charger Station to the VCR’s remote pause terminal using an editing cable.

●If you use a JVC VCR not equipped with a remote pause terminal or a non-JVC VCR, connect the AC Charger Station’s EDIT connector to the remote control’s remote pause connector using an editing cable.

●For customers in the U.K.; Set the VIDEO OUT select switch of the cable adapter as required:

Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an S-VIDEO cable.

CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

●Before Random Assemble Editing, make sure the indications don’t appear on the TV monitor. If they appear during Random Assemble Editing, they will be recorded onto the new tape. To clear the Playback Sound Mode Display, press DISPLAY on the remote

control. Select “DISPLAY” and “TIME CODE” from the Playback Menu (☞ pg. 52) to show or hide the Date/Time and the Time Code on the recording. To show or hide all indications except for the Random Assemble Editing Menu, press IND. ON/OFF on the camcorder for longer than 1 second. When Random Assemble Editing starts, its indications disappear and are not recorded on the new tape.

CONTINUED ON NEXT PAGE