JVC GR-DVL920 System Display, Demo OFF, Side LED, CAM Cancel, Reset Execute, Screen, Lcd/Tv

EN 49

SYSTEM

DISPLAY

DSC

DEMO	OFF		Automatic demonstration will not take place.
MODE
	ON		Demonstrates certain functions such as Program AE with special effects, etc.,
			and can be used to confirm how these functions operate.
			Demonstration starts in the following cases:
			• When the Menu Screen is closed after “DEMO MODE” is turned “ON”.
			• With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes
			after the Power Switch is set to “ AUTO ” or “ MANUAL ” .
			Performing any operation during the demonstration stops the demonstration
			temporarily. If no operation is performed for more than 3 minutes after that, the
			demonstration will resume.
			NOTES:
			● If a tape is in the camcorder, the demonstration cannot be turned on.
			● “DEMO MODE” remains “ON” even if the camcorder power is turned off.
			● If “DEMO MODE” remains “ON”, some functions will not be available. After
			viewing demo, set to “OFF”.
SIDE LED	ON		The Side LED indicator ( p. 80, 81) lights on the camcorder when the Power
			Switch is set to “ AUTO ” or “ MANUAL ”.
	OFF
CAM	CANCEL		Does not reset all settings to the factory-preset.
RESET	EXECUTE		Resets all settings to the factory-preset.
ON	LCD		Keeps the camcorder’s display (except the date, time and time code) from
SCREEN			appearing on the connected TV screen.
	LCD/TV		Makes the camcorder’s display appear on screen when the camcorder is
			connected to a TV.
DATE/	OFF		The date/time does not appear.
TIME
	AUTO		Displays the date/time for approx. 5 seconds in the following cases:
			• When the Power Switch is set from “OFF” to “ AUTO ” or “ MANUAL ”.
			• When tape playback starts. The camcorder displays the date/time when
			scenes are recorded.
			• When the date is changed during tape playback.
	ON		The date/time is always displayed.
TIME	OFF		Time code is not displayed.
CODE	ON		Time code is displayed on the camcorder and on the connected TV. Frame
			numbers are not displayed during recording.
CLOCK ADJ.			Allows you to set the current date and time ( pg. 11).
QUALITY			Refer to “Picture Quality/Image Size Setting” ( pg. 14).
IMAGE SIZE
REC			When Snapshot recording is performed with the VIDEO/MEMORY Switch set
SELECT			to “VIDEO”, still images are recorded only onto the tape.
		/	When Snapshot recording is performed with the VIDEO/MEMORY Switch set
			to “VIDEO”, still images are recorded not only onto the tape but also on the
			memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in
			the CAMERA Menu is also applicable to memory card recording.

: Factory-preset

NOTES:

●“ SYSTEM” and “ DISPLAY” functions which are set when the Power Switch is set to “ MANUAL ” are also applied when

the Power Switch is set to “PLAY” ( pg. 50). “CLOCK ADJ.” only appears when the Power Switch is set to “					MANUAL		”.
● Settings made in the “	DISPLAY” Menu remain effective even when the Power Switch is set to “			AUTO		”. However,
the menu settings can be changed only when the Power Switch is set to “		MANUAL	”.

● The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control (
pg. 23, 52, 59).