JVC GR-DVL920 specifications 66 EN, This camcorder can be used as a WebCam via USB connection

66 EN SYSTEM CONNECTIONS (cont.)

VIDEO/MEMORY Switch (Open the LCD monitor to access this switch.)

Power Switch

To USB

USB cable (provided)

To USB connector

USB-equipped PC

Display

P C We b CAMERA

Using The Camcorder As A WebCam

This camcorder can be used as a WebCam via USB connection.

1 Make sure all necessary software (provided) are installed in your PC and all units are turned off.

2 Connect the camcorder to your PC using the USB cable.

3 Set the VIDEO/MEMORY Switch to “MEMORY”

and set the Power Switch to “	AUTO	” or “	MANUAL	”,
then turn on the PC.

•“Web CAMERA” appears on the screen.

•If the PC is not powered on, the camcorder does not enter the Web Camera mode.

4 When finished, turn off the PC first, then the camcorder. Disconnect the USB cable from the camcorder and PC.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack (
pg. 9).

●Use the provided software PIXELA ImageMixer to capture viceo in real-time.

●You can also use the camcorder for webconference by using Windows® Microsoft Netmeeting and signing up for Microsoft Hotmail.

●In the Web Camera mode, the following buttons cannot be operated: E-MAIL, SNAPSHOT, the Recording Start/Stop button.

Refer to the instruction manuals of the PC and provided Software.