JVC GR-DVL920 specifications Using USB cable, Using DV cable, To USB USB cable Provided Connector

Ad

Page 65

SYSTEM CONNECTIONS

EN 65

[A] Using USB cable

To USB	USB cable	To USB
	(provided)	connector

PC

[B] Using DV cable

Power Switch

To DV

IN/OUT

VIDEO/MEMORY

Switch (Open the LCD monitor to access this switch.)

OR

Core filter	Core filter
DV cable (optional)	To DV
	connector

PC with DV connector

Connection To A Personal Computer

[A] Using USB cable

This camcorder can transfer still images to a PC by using the provided software.

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 If you are using the USB connection, set the VIDEO/MEMORY switch to “MEMORY”.

4 Turn the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

●Refer to “SOFTWARE INSTALLATION AND USB CONNECTION GUIDE” for the installation of the bundled software and drivers.

●It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 9).

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●The system may not work properly depending on the PC or capture board you are using.

“ACCESSING FILES” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “AC- CESSING FILES” is displayed on the LCD monitor since this can result in product damage.

Image 65

Contents GR-DVL920 It is recommended that you Dear CustomerImportant Product Safety Instructions Before recording an important scene Already attached to CD-ROMEditing Cable USB Cable Lens hood Mode is set to on factory-preset Automatic Demonstration takes place when DemoHow To Attach The Lens Cap Set the Power Switch toGetting Started Charging the Battery Pack PowerTo Detach The Battery Pack Charging timeUsing AC Power Using the Battery PackAbout Batteries Approximate recording timeViewfinder Adjustment Grip Adjustment10 EN Shoulder Strap AttachmentLock Button Display Date/Time SettingsMENU/BRIGHT Wheel Power Lamp Loading/Unloading a Cassette Approximate recording time Tape Recording mode12 EN Menu Screen Recording Mode SettingSet the tape recording mode depending on your preference 14 EN Picture Quality/Image Size SettingLoading a Memory Card To Unload a Memory CardTape Recording 16 EN To Adjust The Brightness Of The DisplayBasic Recording To Stop RecordingPower Switch Position Operation ModeVIDEO/MEMORY Switch Position Journalistic Shooting18 EN Slide the Power Zoom Lever towards TZoom Zoom OutSet Light OFF/AUTO/ON as required OFF Turns off the light Feature Video LightTo brighten the scene when natural lighting is too dim 20 EN When a blank portion is recorded on a tapeTime Code Proper recordingNormal Playback To Control The Speaker VolumeConnections 22 ENIf using a VCR . . . go to step If not . . . go to step 24 EN To cancel Blank Search midwayBlank Search PressMemory Card Basic Shooting Snapshot 26 ENTo Remove The Shutter Sound To Protect Valuable Files available only for SD Memory CardTo Delete Unwanted Still Images Auto Playback 28 ENIf you want to select another type of file, press If you are viewing an Image fileRemoving On-Screen Display Index PlaybackViewing File Information To Remove Protection 30 ENProtecting Files Deleting Files To cancel deletion, select ReturnMENU/BRIGHT Wheel Power Switch Lock Button Display Play/Pause Button 4/6 Wheel 32 ENLock Button Display Menu Screen To Make Video Clips from REAL-TIME Camera Image To cancel E-Mail Clip RecordingTo Make Video Clips from Recorded Video Footage To view video clips stored on a memory card34 EN To Reset The SettingTo Print ALL Still Images ONE Print for Each Dpof ScreenTo Print by Selecting Still Images NO. of Prints To Reset The No. Of PrintsMaking a New Folder 36 ENInitializing a Memory Card Folder and File namesAdvanced Features 38 EN To Deactivate The Selected ModeNight-Alive Program AE With Special EffectsSnow ShutterSpotlight TwilightTo Deactivate The Selected Effect 40 ENFade/Wipe Effects Fader And Wipe Menu 42 EN Snapshot Mode SelectionSnapshot For Tape Recording Snapshot RecordingTo obtain correct focus Feature Auto FocusFeature Manual Focus Iris Lock 44 ENExposure Control Manual White Balance Operation White Balance AdjustmentHalogen To Return To Automatic White BalanceFor Recording Menu 46 ENSee pg If you have selected Camera MANUAL, SYSTEM, Display or DSCMenu Screen Explanations 48 EN Reset Execute CAM CancelSystem Display Demo OFFFor Playback Menu Following procedure applies to all except Synchro Comp pg50 EN Display Sound ModePlayback Sound 52 EN Power Switch To AV Audio/VideoDubbing To Or From a VCR Video cable Optional White to Audio Or OUT Yellow to Red toTo use this camcorder as a player Video unit equipped with DV connectorWant to begin recording To DV54 EN Installing The BatteriesSwitch set to the camera Set to Play Position With the camcorder’s Power SwitchPause in Connector 4DISPLAY ButtonFeature Frame-By-Frame Playback Feature Slow-Motion PlaybackFeature Playback Special Effects 56 ENLeft Button Down Button Feature Playback ZoomRemote sensor Zoom Buttons Up Button SET REMOTE/VCR Code 58 ENConnect the editing cable to the R.A.EDIT Connector Connect the editing cable to the Remote Pause connectorMake Connections Also refer to pgSelect Scenes 60 ENRandom Assemble Editing Menu appears Editing MenuAutomatic Editing to VCR 62 EN Adjustment of VCR/CAMCORDER TimingFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingTo hear the dubbed sound during playback Set 12BIT Mode to Sound 2 or MIX Menu Screen pgAudio Dubbing Insert Editing 64 ENUsing DV cable Using USB cableTo USB USB cable Provided Connector Power Switch To DVThis camcorder can be used as a WebCam via USB connection 66 ENReferences Tape Recording pg Power pg68 EN Lens is dirty or covered with Again pg Condensation Camcorder is not getting powerFind a white subject and compose 70 ENSpotlight in the Menu Screen Video pgAre protected Stored on the memory card Delete them pg 72 EN To Video Switch to MemoryWork Set the VIDEO/MEMORYThat explains LCD monitor Check the section of the manualViewfinder indications Occurred. In this case74 EN After Use Cleaning The CamcorderUsing Household AC Plug Adapter 76 EN Serious malfunctioning About moisture condensationDeclaration of Conformity Model Number Trade Name78 EN Edit USB80 EN Sdf OP q yu aVIDEO/MEMORY Switch pg Power SwitchAudio/Video Input/Output Connector Digital Video ConnectorSound 12B I T 82 ENCard Recording Only 10240x W Appears when Digital Image Stabilizer DIS isLCD Monitor/Viewfinder Indications During Tape1Playback Level indicator moves pgIndex Indications 2B I TIndications 86 EN pg , 9 Backlight CompensationChannels Left/Right Darken The LCD MonitorUnload a Tape VIDEO/MEMORY Switch PositionWebCam Zooming