JVC GR-FXM37, GR-FX12, GR-SX22, GR-SX202, GR-SXM607, GR-SXM57 RecordingPlayback, Regular VHS VCR

Page 11

EN11

NOTES about S-VHS and S-VHS ET

JVC EHG (Extra High Grade) tapes are recommended for superior results.

Use S-VHS tape for storing recordings for an extended period or for recording important scenes, as it enables higher-quality recording and playback.

— It is recommended to specifically label S-VHS ET recordings so you can easily distinguish them from regular VHS recordings.

With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is recommended that you do test record beforehand to make sure whether better results can be obtained.

If the S-VHS ET mode or recording format is switched during recording, the playback picture will be blurred at the switching point.

It is recommended that tapes recorded on this camcorder be played back on this camcorder.

Tapes recorded in S-VHS or S-VHS ET mode can be played back not only on this camcorder but also on a Super VHS VCR.

— Tapes recorded in S-VHS ET mode cannot be played back on some VCRs, including some JVC VCRs.

Tapes recorded in S-VHS or S-VHS ET mode cannot be played back correctly on a normal VHS VCR.

S-VHS ET does not work with S-VHS tapes.

To avoid on-screen noise, do not perform Still Playback or Shuttle Search repeatedly.

If the picture contains a lot of jitter or noise, use a cleaning cassette.

Compatibility Between S-VHS And VHS

RecordingPlayback

Blank tape

Camcorder

Recorded tape

Cassette adapter

S-VHS-C

S-VHS

cassette

recordings

S-VHS ET recordings

S-VHS VCR

•The recorded format (S-VHS or VHS) is automatically detected when playback begins.

 

 

Regular VHS VCR

VHS-C

VHS

•S-VHS recorded tapes cannot be

cassette

recordings

 

 

viewed on regular VHS VCRs.

Image 11
Contents Instructions It is recommended that you Dear CustomerModels equipped with LCD monitor only GR-FXM37/FX12 only Crossed Out Dust Bin MarkCore Filter x AC Adapter AP-V10EG Power CordBattery Pack How To Attach The Lens Cap How To Attach The Core FilterSlide Battery Release and pull out the battery pack Charging the Battery PackPower To Detach The Battery PackApproximate recording time unit min Using the Battery PackUsing AC Power Perform of Charging the Battery Pack pgShoulder Strap Attachment Grip AdjustmentViewfinder Adjustment Tripod MountingComes on Date/Time SettingsPower lamp Video Out Setting French model only10 EN Recording Format SettingRegular VHS VCR RecordingPlaybackTape Length Setting Recording Mode SettingLoading/Unloading a Cassette Rotate Bright until the bright level 14 ENShooting While Watching To Stop RecordingJournalistic Shooting models equipped with LCD monitor only SELF-RECORDINGmodels equipped with LCD monitor onlyZoom Out 16 ENZoom Press the Recording Start/Stop Button to start recording Make sure the recording mode is set to SP5Sec. Rec 5-sec. Recording Video LightIf you press during Recording 18 ENNight 50X* GR-SXM57 only If you press during Record-StandbyFades in/out to a black screen Fade/Wipe EffectsProgram AE With Special Effects 20 ENDigital Effects If you select Jlip ID no Using Menus For Detailed AdjustmentSystem Menu Menu Screen ExplanationsCamera Menu System Menu 24 ENInstant Titles Date/Time InsertSet REC Time and 2 of Animation above Time-LapseExposure Control Set the Power Switch to Press MENU. The Menu Screen appearsManual Focus Focusing28 EN Auto FocusTo Change The Tint For Recording White Balance AdjustmentManual White Balance Operation Press Menu again to close the Menu Screen30 EN Load a tape pg Set the Power Switch toTo cancel the effect, select OFF in step Playback image Activate the TBC mode and Auto TrackingUse the provided Cable Adapter If your TV/VCR has a 21-pin connector32 EN GR-SXM607/SXM57/SXM47/SX202/SX22Tape Dubbing Power supply instead of the battery pack pgBasic Connections Slide the latch to open the adapter compartment 34 ENCassette Adapter optional CoverFunctions Buttons EN35With the RM-V700U Installing The Batteries RM-V715U, providedInstalling The Battery RM-V700U, optional Animation Playback ZoomAnimation and Time-Lapse To End ZoomInsert Editing Use the remote control unit to perform this procedureFor Insert Editing and Audio Dubbing Audio DubbingYou are now ready to try Random Assemble Editing SET REMOTE/VCR CodeVCR Recording deck Connect the editing cable to the Remote Pause terminal Connect the editing cable to the R.A.EDIT connectorMake Connections REW Play IN/OUT Select ScenesEditing cable and the A/V cable Automatic Editing to VCRDate/Time SettingsCharging time varies according to the ambient temperature 44 ENTime Base TBC indicator turns green grey with a camcorder equippedRecording TBCAnimation or Time-Lapse is not No power is suppliedRecording cannot be performed Recording does not startLens CAP warning indicator An error number i.e. E03 appearsThat Date/Time setting is carried out Lens CAP warning indicator may blink when3 4 5 y u # $ % 48ENDioptre Adjustment Control Video Light Switch Light OFF/AUTO/ONSpeaker Volume Control VOL Power Switch OFFIndications During Recording 50 ENRewind/Shuttle Search Pause Audio Dubbing Tape Counter Tape Running Indicator PlaybackIndications During Playback Indications FunctionTo avoid hazard To prevent damage and prolong service life52 EN Use only the following batteriesStore cassettes For safety, do notAvoid using the unit During useAbout moisture condensation To prolong service lifeCleaning The Camcorder To prevent damage to the LCD monitor, do notOnly ConnectorsOptional Accessories GeneralGR-FX12GR-FXM37GR-SX22GR-SX202GR-SXM47GR-SXM57GR-SXM607