![](/images/new-backgrounds/1140883/14088371x1.webp)
EN
USING
THE
REMOTE
CONTROL
UNIT
(GR-SXM607/SXM57/SX202
only)
(cont.)![](/images/new-backgrounds/1140883/14088371xi19.webp)
![](/images/new-backgrounds/1140883/14088371xi20.webp)
1
3
2
Installing The Batteries (RM-V715U, provided)
The remote control uses two ”AAA (R03)” size batteries. See “General Battery Precautions” (☞ pg. 52).
1
2 Insert two ”AAA (R03)” size batteries in the correct direction.
3 Replace the battery compartment cover.
A
1
2
3
1
Lock hole
B
2 1 3
Knob
1
Installing The Battery (RM-V700U, optional)
The remote control uses one lithium battery (CR2025).
1 : Pull out the battery holder while sliding the lock hole.
: Pinch the release tab and pull out the battery holder.
2 Insert the battery in the holder, and be sure to have the “+” mark visible.
3 Slide the holder back in until you hear a click. •Read the cautions in the instructions provided
with the RM-V700U.
Remote sensor
Transmitted beam effective area
When using the remote control, be sure to point it at the remote sensor. The illustration shows the approximate transmitted beam effective area for indoor use.
The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.