JVC GR-FX12, GR-SX22, GR-SX202, GR-SXM607, GR-SXM57 Recording Mode Setting, Tape Length Setting

12ENGETTINGSTARTED(cont.)

MENU Wheel		Recording Mode Setting
		Set the tape recording mode depending on your preference.
		Set the Power Switch to “	”. The power lamp
		1 comes on.
		2 Press MENU. The Menu Screen appears.
		Rotate MENU to select “	TO SYSTEM MENU” and
Power Switch		3 press it to display SYSTEM MENU.
		Rotate MENU to select “REC MODE” and press it.
Display		4 The REC MODE Menu appears. Select “SP” or “LP”
		by rotating MENU and press it. The Menu Screen
REC MODE	REC MODE Menu	reappears with the highlight bar on “ RETURN”.
		Press MENU to close the Menu Screen.
SP
		•“LP” (Long Play) is more economical, providing
L P

twice the recording time.

	NOTES:
	● If the recording mode is switched during recording, the
EX I T	playback picture will be blurred at the switching point.
	● S-VHS ET recording is not possible when the recording
	mode is set to “LP” (☞ pg. 10, 24).

SP Recording mode indicator

Display

	TAPE L ENGTH		TAPE LENGTH
T 3 0			Menu
T 4 5
T 5 0
T 6 0
EX I T
		T 3 0		Tape length
				indicator

Tape Length Setting

Set the tape length according to the length of the tape used.

1 Perform steps 1 through 3 above.

2 Rotate MENU to select “TAPE LENGTH”, then press it. The TAPE LENGTH Menu appears.

3 Rotate MENU to select the correct tape length setting. •T30=30 minutes

•T45=45 minutes •T50=50 minutes •T60=60 minutes

4 Press MENU. The Menu Screen reappears with the highlight bar on “RETURN”. Press MENU to close the Menu Screen.

NOTE:

The tape remaining time (☞ pg. 14) is correct only if the correct tape length has been selected.