JVC GR-SXM46, GR-FX11, GR-SX41, GR-SXM26, GR-SX21, GR-FXM16 EN Getting Started, Tape Length Setting

10ENGETTINGSTARTED

Tape Length Setting

(cont.)

Select Wheel

Power Switch

MENU Button

Set the tape length according to the length of the tape used.

1 Set the Power Switch to “PRO.”, then press MENU.

2 Rotate the Select Wheel to move the highlight bar to “TAPE LENGTH”, then press it. The TAPE LENGTH Setting Menu appears.

3 Rotate the Select Wheel to move the highlight bar to the correct tape length setting. T30=30 minutes of recording time, T45=45 minutes, T50=50 minutes and T60=60 minutes.

•To return to the previous setting, rotate the Select Wheel to move the highlight bar to “EXIT”.

	Viewfinder			Press the Select Wheel. The Menu Screen reappears
		T 3 0	Tape length indicator	4 with the highlight bar on “RETURN”. Press the Select
				Wheel again to close the Menu Screen.
				NOTE:
	Display			The tape remaining time (☞ pg. 16) displayed in the
				viewfinder is correct only if the correct tape length has
TE L E MACRO		OF F		been selected.
TAPE	L ENGTH	T 3 0	Menu Screen
4RE TURN
	TAPE L ENGTH		TAPE LENGTH
T 3 0			Setting Menu
T 4 5
T 5 0
T 6 0
EX I T
TE L E MACRO		OF F
TAPE	L ENGTH	T 4 5

4RE TURN