JVC GR-FXM16, GR-FX11, GR-SX41, GR-SXM26, GR-SXM46, GR-SX21 Playback Basic Playback EN33, Bright

PLAYBACKBasicPlaybackEN33

Power Zoom Lever (VOL.*)

Speaker*

Select Wheel	Set to “PLAY”.
(BRIGHT*)

*GR-SXM46/SXM26/FXM16/FXM161 only

Rewind (2) Button

Fast-Forward (3) Button

Play/Pause (4/6) Button

Stop (5) Button

1 Load a tape (☞ pg. 11).

2 Set the Power Switch to “PLAY”. To start playback, press 4/6.

•To stop playback, press 5.

•Press 2to rewind, or 3 to fast-forward the tape during Stop mode.

NOTES:

●The camcorder shuts off automatically after about

5 minutes in Stop mode. To turn on again, set the Power Switch to “OFF”, then to “PLAY”.

●When the Power Switch is set to “PLAY” and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power (GR-SXM46/SXM26/ FXM16/FXM161 only).

●The playback picture can be viewed in the viewfinder

(with the LCD monitor* shut), on the LCD monitor* or on a connected TV (☞ pg. 36, 37). *GR-SXM46/SXM26/FXM16/FXM161 only.

●You can also view the playback picture on the LCD monitor with it flipped over and retracted (GR-SXM46/ SXM26/FXM16/FXM161 only).

●If a blank portion on the tape is played back, the screen may become black. This is not a malfunction.

LCD Monitor Brightness Adjustment (GR-SXM46/SXM26/FXM16/FXM161 only): Rotate the Select Wheel (BRIGHT) towards “+” to brighten, or towards “–” to darken.

●The Bright Level Indicator is displayed under the Date/Time Display when you play back images recorded in Wide Mode (☞ pg. 25).

Speaker Volume Control (GR-SXM46/SXM26/FXM16/FXM161 only): Slide the Power Zoom Lever (VOL.) towards “+” to turn up the volume, or towards “–” to turn down the volume.

●The Speaker Volume Indicator is displayed under the Date/Time Display when you play back images recorded in Wide Mode (☞ pg. 25).

Still Playback: Pauses during playback.

1)Press 4/6during playback.

2)To resume normal playback, press 4/6again.

●Noise bars will appear and the picture will become monochrome during Still Playback.

●If TBC (☞ pg. 34) is engaged, noise bars will not appear. This mode is called Fine Still (GR-SXM46/SX41 only).

Shuttle Search: Allows high-speed search in either direction.

1)Press 3for forward or 2 for reverse search during playback.

2)To resume normal playback, press 4/6.

●During playback, press and hold 2or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●Noise bars appear and pictures may become monochrome or darken during Shuttle Search. This is normal.