JVC GR-FXM161, GR-FX11, GR-SX41 34 EN, Playback Features, Gives recorded scenes a strobe effect

34EN

PLAYBACKFeatures

P.STABILIZER Button

EFFECT Button

P.AE Button

COUNTER R/M	Set to “PLAY”.
Button

Rewind (2) Button

Fast-Forward (3) Button

Play/Pause (4/6) Button

Stop (5) Button

(GR-SXM46/SX41 only)

CLASSIC FILM

Gives recorded scenes a strobe effect.

MONOTONE

Like classic black and white films, your footage is shot in B/W. Used together with the WIDE mode (☞ pg. 25), it enhances the “classic film” effect.

SEPIA

Recorded scenes have a brownish tint like old photos. Combine this with the WIDE mode for a classic look.

STROBE

Your recording looks like a series of consecutive snapshots.

VIDEO ECHO

Adds a “ghost” to the subject, giving your recording a “fantasy” feeling.

Tracking: Eliminates noise bars that appear on-screen during playback. Factory-preset is Auto Tracking.

To activate Manual Tracking:

1)Press P.AE and EFFECT simultaneously. “MT” appears.

2)Press P.AE or EFFECT as many times as necessary until the noise bars disappear.

●To return to Auto Tracking, press P.AE and EFFECT simultaneously. “AT” blinks. When Auto Tracking finishes, the indication disappears.

●When noise bars appear during playback, the camcorder enters the Auto Tracking mode and “AT” is displayed.

●Manual Tracking may not work with tapes recorded on other VCRs or camcorders.

TBC (Time Base Corrector): Removes jitter from fluctuating video signals to deliver a stable picture even with old tapes. Factory-preset: TBC is engaged.

To activate/release the TBC mode, press P.STABILIZER during playback for more than 1 second. When the TBC mode is activated, “TBC” is displayed.

●The “TBC” indicator turns green (grey with a camcorder equipped with a black/white viewfinder) while TBC is working.

●TBC does not work during still playback and shuttle search.

●The “TBC” indicator turns white while TBC is not operative.

●It may take a few seconds before TBC actually starts working.

●The picture may be distorted if the TBC mode is activated or deactivated at the edit-in/-out points or when normal playback resumes after still playback or shuttle search.

●If the playback picture is distorted when TBC is set to on, turn off TBC.

Counter Memory Function: Makes it easier to locate a specific tape segment.

1)Press COUNTER R/M and hold for more than 1 second. The counter resets to “0:00:00”.

2)Press COUNTER R/M for less than 1 second. “M” appears.

3)After recording or playback, press 5, then 2. The tape automatically stops at or close to 0:00:00.

4)Press 4/6to start playback.

●The counter memory functions in the Fast-Forward and Rewind modes.

●To disable the Counter Memory Function, press COUN- TER R/M for less than 1 second so that “M” disappears.

Playback Special Effects (GR-SXM46/SX41 only): Allows you to add creative effects to the playback image.

1)Activate the TBC mode and Auto Tracking.

2)Press and hold P.AE for 1 second repeatedly until the desired mode’s name and indication appear. They are displayed for approx. 2 seconds, then the name disappears so that only the indication remains. The effect is reserved.

3)To cancel the effect, press P.AE repeatedly until “OFF” appears. “OFF” is displayed for approx. 2 seconds.

● Playback Special Effects do not work during shuttle search.

● The selected effect mode cannot be changed during still playback.