JVC GR-DVX90 specifications Dubbing From a VCR, EN61, To use this camcorder as a recorder

Set “AV/S-VIDEO” to “IN” in the Menu Screen to engage the analogue input mode (
pg. 41).

Press START/STOP on the camcorder to engage the Record-Pause mode. “AV. IN” appears on the screen.

POWER Switch

Lock Button

To S

EN61

Dubbing From A VCR

[To use this camcorder as a recorder]

1 Make sure all units are turned off, then connect the camcorder and the VCR as shown in the illustration. Also refer to pg. 56 and 57.

2 Set “SOUND MODE” to “12 BIT” or “16 BIT” and “REC MODE” to “SP” or “LP” in the Menu Screen depending on your preference (
pg. 11, 26, 27).

3 Set the camcorder’s POWER Switch to “” while pressing down the Lock Button located on the switch. Turn on the VCR’s power and insert the appropriate cassettes in the camcorder and the VCR.

Red to

AUDIO R

White to

AUDIO L

Audio/Video cable [RCA plug to RCA plug] (provided)

Yellow to

VIDEO*

Core filter

S-Video cable (provided)

To AUDIO, VIDEO* and

S-VIDEO OUT connectors

4

5

6 Engage the VCR’s Play mode, then engage the Still Playback mode when you have found a spot just before the edit-in point.

7 Press START/STOP on the camcorder to engage the

Record mode. “ AV. IN ” appears on the screen. Engage the VCR’s Play mode.

8 To stop dubbing, press START/STOP on the camcorder so that “AV. IN” reappears, then engage the VCR’s Stop mode.

9 Repeat steps 6 through 8 for additional editing.

10 Set “AV/S-VIDEO” back to “OUT” in the Menu Screen to disengage the analogue input mode

VCR

( pg. 41).

TV

NOTES:

●When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.

●It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack (
pg. 7).

●Analogue signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.

*Connect when the S-Video cable is not used.