JVC GR-DVX90 specifications EN81

		EN81
SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
17. Programme AE with special	17. • The Operation Switch is set to	17. • Set the Operation Switch to
effects and Fade/Wipe Effects	“ ”.	“ ” ( pg. 34, 36).
do not work.
18. The Black & White Fader	18. • The Sepia or Monotone mode	18. • Turn off Sepia and Monotone
does not work.	is activated.	( pg. 34, 36).
19. The Dissolve function does	19. • The Sepia, Monotone or Slow	19. • Turn off Sepia, Monotone or
not work.	Shutter mode of Programme	Slow Shutter before adding
	AE with special effects is	Dissolve to a scene transition
	activated.	( pg. 34, 36).
	• “WIDE MODE” is set to	• Set “WIDE MODE” to
	“SQUEEZE” or “PS-WIDE” in	“CINEMA” or “OFF” mode
	the Menu Screen.	( pg. 28).
	• The previously selected mode	• Make sure you have selected
	of Programme AE with special	the mode of Programme AE
	effects was changed after the	with special effects you want
	last selected scene for editing	before starting editing
	was registered.	( pg. 34, 36).
20. The Picture Wipe and	20. • The last selected editing scene	20. • Select Picture Wipe or
Dissolve functions do not	is ending.	Dissolve before beginning
work.	• At the end of the last selected	recording. The effects are then
	scene for editing, the POWER	automatically activated
	Switch was set to “OFF”.	( pg. 34).
	• The power is off.	• Do not turn off the
		camcorder’s power after
		setting Edit-In and Edit-Out
		points, as they will all be
		erased ( pg. 34).
		• The camcorder automatically
		shuts off after 5 minutes have
		elapsed in the Record-Standby
		mode. Make sure you
		continue operations within 5
		minutes after engaging Record-
		Standby mode ( pg. 34).
21. The picture wipe function	21. • The Slow Shutter mode is	21. • Disengage the Slow Shutter
does not work.	activated.	mode or set “WIDE MODE”
	• “WIDE MODE” is not set to	to “OFF” before preparing to
	“OFF”.	use the Picture Wipe
		( pg. 28, 34, 36).
22. Scene transition does not go	22. • When using “Picture Wipe/	22.
as expected.	Dissolve” ( pg. 34), there is
	a delay of a fraction of a
	second between the previous
	record stop-point and the
	Dissolve start-point. This is	————
	normal, but this slight delay
	becomes especially
	noticeable when shooting
	fast-moving subject or during
	rapid panning.
23. The Video Echo mode does	23. • The Picture Wipe or	23. • Set “WIDE MODE” to
not work.	Dissolve functions are in use.	“CINEMA” or “OFF” mode
	• “WIDE MODE” is set to	( pg. 28).
	“SQUEEZE” or “PS-WIDE” in	• Do not try to use the Video
	the Menu Screen.	Echo mode during a Fade-In
	• A Fade-In or Fade-Out is in	or Fade-Out ( pg. 34, 36).
	progress.

CONTINUED ON NEXT PAGE